|
| 1 | Dismantling C.I or asbestos rain water pipe with fittings and clamps including stacking the material upto all leads and lift as per direction of Engineer-in-Charge :- a) 100 mm dia pipe. |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material upto all leads and lift as per direction of Engineer-in-Charge :-a) Nominal concrete 1:3:6 or richer mix |
| 3 | Dismantling of wooden doors, windows and clerestory windows shutter including chowkhats, architrave, holdfasts etc. complete and stacking upto all leads and lifts as per direction of Engineer-in-Charge :-a) Of area 3 sq. metres and below |
| 4 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking upto all leads and lift as per direction of Engineer-in-Charge. |
| 5 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material upto all leads and lift as per direction of Engineer–in- charge:-a) For thickness of tiles 10 mm to 25 mm |
| 6 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within all leads and lift. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level :-a) 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 8 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-Charge and finished smooth.a) White Agaria Marble Stone. |
| 9 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid separately).a) 1st Class Deodar wood. |
| 10 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge:- a) Second class teak wood. i) 35 mm thick shutters |
| 11 | Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws :- a) Second class teak wood. i) 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. |
| 12 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:-a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 13 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 14 | Providing and fixing Aluminium Sheet of 22 gauge lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately). |
| 15 | Providing and fixing S.S handles, ISI marked, of required colour or shade, with necessary screws etc. complete : (Godrej/ Jindal)a) 125 mm. |
| 16 | Providing and fixing S.S tower bolts, ISI marked, of required colour or shade, with necessary screws etc. complete : (Godrej/ Jindal)a) 100x10 mm |
| 17 | b) 200x10 mm |
| 18 | Providing and fixing S.S sliding door bolts, ISI marked of required colour or shade, with nuts and screws etc. complete : (Godrej/ Jindal)a) 250x16mm. |
| 19 | Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).a) Dark shade pigment using ordinary cement. |
| 20 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. (Kajaria/Somany/Johnson).a) In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand).i) Acid and alkali resistant tile. |
| 21 | Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete as Per direction of Engineer-in-Charge. (Kajaria/Somany/Johnson) a) 8 mm thick |
| 22 | 6 mm cement plaster of mix :a) 1:3 (1 cement : 3 fine sand) |
| 23 | 15 mm cement plaster on rough/Fair side of single or half brick wall of mix: a) 1:6 (1 cement: 6 coarse sand) |
| 24 | Applying priming coat:-a) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood). |
| 25 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (Birla/J.K) |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :-a) Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (Asian Paints/Nerolac/Dulux) |
| 27 | Providing & fixing glass panes with putty and glazing clips in doors, windows, clerestory windows, all complete with :-a)4.0 mm thick glass panes |
| 28 | Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood.A) 50x50 mm (base and height). |
| 29 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground complete as per Direction by Engineer-in-Charge. |
| 30 | Public Health:-Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (Somany/Cera/Hindware)a) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rest. |
| 31 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:- (Somany/Cera/Hindware).a) W.C. pan with ISI marked white solid plastic seat and lid. |
| 32 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:-(Somany/Cera/Hindware).a) Single half stall urinal with 5 litre P.V.C automatic flushing cistern. |
| 33 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (Somany/Cera/Hindware).a) White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap. |
| 34 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. (Somany/Cera/Hindware). |
| 35 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. a) Flexible pipe. i) 32 mm dia. |
| 36 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 37 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 38 | Providing and fixing toilet paper holder :-a) C.P. brass. |
| 39 | Providing and fixing C.P.Brass Towel Rail complete with C.P.brass brackets fixed to wooden plugs with C.P. Screws. (Hindware/Cera/Parryware). a) 600mm x 20mm Size. |
| 40 | Providing and fixing ISI High Pressure PVC spigot and socket soil waste and ventilating pipe including fixing with approved adhesive etc. complete:- (Supreme/ Astral/ Finolex).a) 110mm dia. |
| 41 | b) 150mm dia. |
| 42 | Providing and fixing PVC Plain Bend ISI Marked including fixing with approved adhesive etc. complete.(Supreme / Astral/ Finolex).a) 110mm |
| 43 | b) 150 mm |
| 44 | Providing and fixing PVC Door bend with oval access door insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete. (Supreme/ Astral/ Finolex).a) 110 mm. |
| 45 | b) 150 mm. |
| 46 | Providing and fixing PVC Collar including fixing with approved adhesive etc. complete.(Supreme/ Astral/ Finolex). a) 110mm. |
| 47 | b) 150mm. |
| 48 | Providing and fixing PVC Single Equal Branch with oval access doors, insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc complete.(Supreme/ Astral/ Finolex). a) 110mm. |
| 49 | Providing and fixing PVC Floor Trap of ISI Mark of self cleaning design including fixing with approved adhehsive , cost of cutting and making good the walls and floors etc. complete.(Supreme/ Astral/ Finolex).a) 110x90 mm |
| 50 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun)/PVC pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. a) For 100 mm dia pipe. |
| 51 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer-in-Charge. |
| 52 | Providing and fixing uplasticised PVC connection pipe with brass unions :- i) 45 cm length. a) 15 mm nominal bore. |
| 53 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. (Jindal/Tata/Surya ) a) 15 mm dia nominal bore |
| 54 | b) 40 mm dia nominal bore. |
| 55 | Providing and fixing PTMT grating of approved quality and colour.i) Circular type. a) 100 mm nominal dia. |
| 56 | Providing and fixing brass stop cock of approved quality :-a) 15 mm dia nominal bore. |
| 57 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :a) 40 mm dia nominal bore. |
| 58 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete: - (Jindal/Tata/Surya ) a) 15 mm dia nominal bore. |
| 59 | b) 40 mm dia nominal bore. |
| 60 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. (Hindware/Cera/Parryware)a) 15 mm dia nominal bore. |
| 61 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931:- (Hindware/Cera/parryware) a) 15 mm dia nominal bore |
| 62 | Constructing brick masonry manhole in cement mortar 1:4 (1cement : 4 coarse sand) with R.C.C. top slab with 1:1.5:3 mix (1cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :i) Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :- a) With common burnt clay F.P.S. (non modular bricks of class designation 7.5. |
| 63 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :a) For pipes 100 to 250 mm diameter. |
| 64 | Providing and fixing superior quality 32 mm dia S.S Grab bar of thickness not less then 18 gauge including fixtures & fitting, fastners complete in all respect. |
| 65 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :-a) 25 to 40 mm nominal bore Please Enable Macros to View BoQ information |
