|
| 1 | Trimming along 33KV double circuit tower line. |
| 2 | Supplying of 16 mtr. length swaged MS steel tubular pole confirming to IS standard of class designation 410SP-77. |
| 3 | Painting of swaged steel tubular pole of 16 mtr. length with one coat red-oxide & two coats of aluminium paint of good quality (reputed make). |
| 4 | Dismantling of pole / street light standard / strut embeded in cement concrete foundation etc. as reqd. |
| 5 | Shifting of MS tubular pole of 16mtr length from workshop to site and vice versa including loading, unloading, stacking etc as reqd. |
| 6 | Erection of steel tubular pole of length exceeding 12mts. but, not exceeding 16mts. excluding excavation, masonry work, refilling etc. as reqd. |
| 7 | Excavation, masonry work of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone of 40mm. nominal size) for foundation, refilling etc. for erection of steel tubular pole of length exceeding 12mts., but not exceeding 16mts. |
| 8 | Supplying and erection of galvanised stay set for 33 KV overhead lines complete with 19/20 mm dia x 1.8metres long stay rod, anchor plate of size 45cm x 45cm x 7.5mm thick, thimble, stay clamps, turn buckle (20mm x 600mm), 7/4.00 mm dia GI stay wire and 33 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as reqd. |
| 9 | Supplying of two lengths of MS channel iron 100 mm x 50 mm x 6mm (9.56 kg./mt.) double pole cross arm of 4.6mtr. long for three wire 33 KV overhead line conductors complete with through bolts and nuts for clamping to the poles, 50 mm x 6 mm MS flats welded on one side of channel iron and with bolts & nuts on the other side for tying the cross arms together including drilling holes for insulator pins / fittings, bolts, nuts & washers etc. and painting with primer and finish paint as reqd. |
| 10 | Erection of 4.6mtr. long double pole 3-wire cross arm for 33KV O/H lines as required. |
| 11 | Supplying of two lengths of channel iron 100 mm x 50 mm x 6mm (9.56 kg./mt.) double pole cross arm of 2.8mtr. long for three wire 33 KV overhead line conductors complete with through bolts and nuts for clamping to the poles, 50 mm x 6 mm MS flats welded on one side of channel iron and with bolts & nuts on the other side for tying the cross arms together including drilling holes for insulator pins / fittings, bolts, nuts & washers etc. and painting with primer and finish paint as reqd. |
| 12 | Erection of 2.8mtr. long double pole 3-wire cross arm for 33KV O/H lines as required. |
| 13 | Supplying & erection of a set of cross bracing frame work for 33KV O/H line double pole structure having four members fabricated out of 65 mm. x 65mm. x 6 mm angle iron to form a rectangle of minimum size 2800mm. width x 3200mm. height complete with 50 mm x 6 mm MS flat iron clamps, bolts & nuts including drilling holes for insulator pins, bolt and nuts etc. & painting with primer and finish paint as reqd. |
| 14 | Supplying and erection of a set of three 11 KV disc insulators for 33 KV overhead lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required. |
| 15 | Supplying and erection of 33 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required. |
| 16 | Dismantling of overhead lines comprising of copper / aluminium overhead conductor, G.I. wire, cross arms, insulators etc. as reqd. |
| 17 | Supplying of 125 sq. mm. stranded All aluminium alloy conductor confirming to IS standard. |
| 18 | Erection of ACSR conductor of 7/3.35 mm to 7/4.00 dia. and above including binding etc. as reqd. |
| 19 | Earthing with G.I. earth plate 600mm. x 600 mm. x 6 mm. thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 mtr. long with charcoal / coke and salt as reqd. |
| 20 | Supplying & laying 50 mm x 6 mm G.I. strip at 0.50 metre below ground as strip earth electrode including solder jointing / connection / terminating with G.I. nut, bolt, spring, washer etc. as reqd. (Jointing shall be done by overlapping and with 2 sets of G.I. nut, bolt & spring washer spaced at 50 mm.). |
| 21 | Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC Please Enable Macros to View BoQ information |
