|
| 1 | Earthwork in excavation by mechanical means (hydraulic excavator) manual means is over 1.5 m in width or 10 sq.m. on plan including dressing of sides and ramming of bottoms lift including getting out the excavated soil and disposal of surplus excavated soil for all lead & in all types of soft stratas comprising any of the materials such as soil, silt, sand , clay , gravel, moorum of all varients shingles, pebbles all type of conglomevates, laterite rocks, ordinary rocks, soft rocks disintergrated rocks fissused, shuttered / decompressed rocks weather red roacks and all such other materials as described under appendix Ato these specification either in full or in parts as the case may be adopting any method/ methodes as may be convenient or permitted inclusive of chiseling, wedging etc., blasting prohibited and in all conditions such as dry, moist, fool, saturated submerged etc. including providing barricading, danger lighting gaurding and as per the direction of the Engineer-in charge etc., plus Extra for additional depth 1.5m or part there of is. |
| 2 | Cutting the bituminous road for laying the pipeline in trenches for a width of 0.6m including labour, tools, etc. and disposing the excavated excess material from the trench to a distance of 1000 metres, including making level the trench surface by utilising the serviceable material to the level of the top surface of road, by compacting, watering ramming with rolling with road roller after completion of laying of pipe and refilling the trenches etc. complete as per the direction of engineer in charge.;By Manual Means :;Rural Roads |
| 3 | Cutting the bituminous road for laying the pipeline in trenches for a width of 0.6m including labour, tools, etc. and disposing the excavated excess material from the trench to a distance of 1000 metres, including making level the trench surface by utilising the serviceable material to the level of the top surface of road, by compacting, watering ramming with rolling with road roller after completion of laying of pipe and refilling the trenches etc. complete as per the direction of engineer in charge.;By Manual Means :;District Road, State highways, National highway and roads of similar standards |
| 4 | Repairs and reinstatement to the road for trenches made by laying water supply pipeline, by removing the refilled material in the trench for the total depth of 0.40m and making good the road surface by providing laying rolling by road roller compacting for laterite soling 30cm thick, two layer of full grout of 50mm thick each as per specifications mentioned in item no 14086 of road GSR, complete as per the direction of the engineer in charge. Rural road |
| 5 | Repairs and reinstatement to the road for trenches made by laying water supply pipeline, by removing the refilled material in the trench for the total depth of 0.42m and making good the road surface by providing laying rollling by road roller compacting for laterite soling 30cm thick, two layer of full grout of 50mm thick each, tack coat and open graded premix carpet of 20mm thickness as per specifications mentioned in item nos 14086, 14093, 14051 & 14068 of road GSR respectively, complete as per the direction of the engineer incharge. a) District Road, State highway, National highway and roads of similar standards. |
| 6 | Supplying at store or site of work including railway freight carting loading and unloading stacking etc. Centrifugally cast (spun) ductile iron pressure pipes (with socket/spigot ends) conforming to IS : 8329-2000 with cement mortar lining inside the pipe and outside zinc coat as per IS : 8329-2000 with up to date amendments suitable for jointing with rubber gasket known as TYTON joints. Class K-9 .;Nominal Diameter in mm;300 |
| 7 | Supplying at store or site of work including railway freight carting loading and unloading stacking etc. Centrifugally cast (spun) ductile iron pressure pipes (with socket/spigot ends) conforming to IS : 8329-2000 with cement mortar lining inside the pipe and outside zinc coat as per IS : 8329-2000 with up to date amendments suitable for jointing with rubber gasket known as TYTON joints. Class K-9 .;Nominal Diameter in mm;400 |
| 8 | Supplying at store or site of work including railway freight carting loading and unloading stacking etc. Centrifugally cast (spun) ductile iron pressure pipes (with socket/spigot ends) conforming to IS : 8329-2000 with cement mortar lining inside the pipe and outside zinc coat as per IS : 8329-2000 with up to date amendments suitable for jointing with rubber gasket known as TYTON joints. Class K-9 .;Nominal Diameter in mm;450 |
| 9 | Manufacturing and supplying at site of work welded MS pipes of finished ID of suitable lengths made out of fabricating welding forming 'V' edge to both ends of the pipes sides including providing and fixing welding etc. of suitable MS hinges conforming to relevant IS codes stresses induced due to trench conditions backfilling class 'A' traffic loading handling temperature variation etc. testing the pipeline to a field test pressure of 25 kg /cm2 as directed by Engineer-in-charge. (the finished internal dia. is to be considered without cement mortar lining /Epoxy painting).;10 mm thick (plate welded);Dia in mm;400 |
| 10 | Manufacturing and supplying at site of work welded MS pipes of finished ID of suitable lengths made out of fabricating, welding forming 'V' edge to both ends of the pipes sides including providing and fixing welding etc. of suitable MS hinges conforming to relevant IS codes, stresses induced due to trench conditions, backfilling class 'A' traffic loading, handling temperature variation etc. testing the pipeline to a field test pressure of 25 kg /cm2 as directed by Engineer-in-charge. (the finished internal dia. is to be considered without cement mortar lining /Epoxy painting).WITH EXCISE DUTY |
| 11 | Welding in all position with minimum 3 Nos. of runs for MS pipes and specials and flanges internally and externally including gauging wherever necessary fixing appurtances and other accessories cost of water pumping arrangement and hydraulic testing etc. complete for 12mm/10mm thick M.S.plate.;Dia in mm;300;400 |
| 12 | Welding in all position with minimum 3 Nos. of runs for MS pipes and specials and flanges internally and externally including gauging wherever necessary fixing appurtances and other accessories cost of water pumping arrangement and hydraulic testing etc. complete for 12mm/10mm thick M.S.plate.;Dia in mm;300;450 |
| 13 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;Double Socket Reducer;Nominal Diameter in mm;400x300 |
| 14 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;Double Socket Reducer;Nominal Diameter in mm;450x400 |
| 15 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;Double Socket Tee with Branch Flange;Nominal Diameter in mm;400x100 |
| 16 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;Double Socket Tee with Branch Flange;Nominal Diameter in mm;400x200 |
| 17 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;Double Socket Tee with Branch Flange;Nominal Diameter in mm;400x300 |
| 18 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;Double Socket Tee with Branch Flange;Nominal Diameter in mm;450x100 |
| 19 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;Double Socket Tee with Branch Flange;Nominal Diameter in mm;450x150 |
| 20 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;Double Socket Tee with Branch Flange;Nominal Diameter in mm;450x200 |
| 21 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;Double Socket Tee with Branch Flange;Nominal Diameter in mm;450x450 |
| 22 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;Double Socket Tee with Branch Flange;Nominal Diameter in mm;450x400 |
| 23 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;Flanged Socket;Nominal Diameter in mm;400 |
| 24 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;Flanged Socket;Nominal Diameter in mm;450 |
| 25 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;M.J.Collar;Nominal Diameter in mm;300 |
| 26 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;M.J.Collar;Nominal Diameter in mm;400 |
| 27 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;M.J.Collar;Nominal Diameter in mm;450 |
| 28 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;Double Socket Bend 45 Degree;Nominal Diameter in mm;300 |
| 29 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;Double Socket Bend 45 Degree;Nominal Diameter in mm;400 |
| 30 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;Double Socket Bend 45 Degree;Nominal Diameter in mm;450 |
| 31 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;Double Socket Bend 22.5 Degree;Nominal Diameter in mm;300 |
| 32 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;Double Socket Bend 22.5 Degree;Nominal Diameter in mm;400 |
| 33 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;Double Socket Bend 22.5 Degree;Nominal Diameter in mm;450 |
| 34 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;Double Socket Bend 11.25 Degree;Nominal Diameter in mm;300 |
| 35 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;Double Socket Bend 11.25 Degree;Nominal Diameter in mm;400 |
| 36 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;Double Socket Bend 11.25 Degree;Nominal Diameter in mm;450 |
| 37 | Supplying at store or site of work including railway freight carting loading unloading stacking etc. Cast iron double flanged manually operated Sluice Valve generally conforming to IS:14846 - 2000 having body door dome wedge in graded cast iron to IS:210 Gr. FG 200 min. four faces and spindle nut of leaded tin bronze to IS:318 Gr. LTB 2 inside screw of non-rising stainless steel AISI 410 spindle flanges drilled to IS:1538 Table 4 & 6. Valves tested by closed end method only (350mm and above will be fitted with BTB and Spur gear box and back seat bush.) etc complete TYPE P.N. 1.6 (Class A );Dia in mm;100 |
| 38 | Supplying at store or site of work including railway freight carting loading unloading stacking etc. Cast iron double flanged manually operated Sluice Valve generally conforming to IS:14846 - 2000 having body door dome wedge in graded cast iron to IS:210 Gr. FG 200 min. four faces and spindle nut of leaded tin bronze to IS:318 Gr. LTB 2 inside screw of non-rising stainless steel AISI 410 spindle flanges drilled to IS:1538 Table 4 & 6. Valves tested by closed end method only (350mm and above will be fitted with BTB and Spur gear box and back seat bush.) etc complete TYPE P.N. 1.6 (Class A );Dia in mm;150 |
| 39 | Supplying at store or site of work including railway freight carting loading unloading stacking etc. Cast iron double flanged manually operated Sluice Valve generally conforming to IS:14846 - 2000 having body door dome wedge in graded cast iron to IS:210 Gr. FG 200 min. four faces and spindle nut of leaded tin bronze to IS:318 Gr. LTB 2 inside screw of non-rising stainless steel AISI 410 spindle flanges drilled to IS:1538 Table 4 & 6. Valves tested by closed end method only (350mm and above will be fitted with BTB and Spur gear box and back seat bush.) etc complete TYPE P.N. 1.6 (Class A );Dia in mm;200 |
| 40 | Supplying at store or site of work including railway freight carting loading unloading stacking etc. Cast iron double flanged manually operated Sluice Valve generally conforming to IS:14846 - 2000 having body door dome wedge in graded cast iron to IS:210 Gr. FG 200 min. four faces and spindle nut of leaded tin bronze to IS:318 Gr. LTB 2 inside screw of non-rising stainless steel AISI 410 spindle flanges drilled to IS:1538 Table 4 & 6. Valves tested by closed end method only (350mm and above will be fitted with BTB and Spur gear box and back seat bush.) etc complete TYPE P.N. 1.6 (Class A );Dia in mm;400 |
| 41 | Supplying at store or site of work including railway freight carting loading unloading stacking etc. Cast iron double flanged manually operated Sluice Valve generally conforming to IS:14846 - 2000 having body door dome wedge in graded cast iron to IS:210 Gr. FG 200 min. four faces and spindle nut of leaded tin bronze to IS:318 Gr. LTB 2 inside screw of non-rising stainless steel AISI 410 spindle flanges drilled to IS:1538 Table 4 & 6. Valves tested by closed end method only (350mm and above will be fitted with BTB and Spur gear box and back seat bush.) etc complete TYPE P.N. 1.6 (Class A );Dia in mm;450 |
| 42 | Supplying at store or site of work including railway freight carting loading unloading stacking etc cast iron Tamper Proof Kinetic Air release valve generally conforming to IS:14845 with TAMPER PROOF DESIGN OF COWL TAMPER PROOF BOLTING TAMPER PROOF HIGH PRESSURE ORIFICE COVER AND NIPPLE. TYPE P.N. 1.6 (Class A);Dia in mm;100 |
| 43 | Conveying carefully from stack at site 250m from both sides rolling and lowering in trenches laying and jointing true to line and level and perfect linking of joints;Cast iron or Ductile iron or A.C. or S & S or flanged & PVC pipes. |
| 44 | Conveying carefully from stack at site 250m from both sides rolling and lowering in trenches laying and jointing true to line and level and perfect linking of joints;S&S flanged/plain ended specials |
| 45 | Jointing of C.I/D.I pipes and specials with rubber gaskets (TYTON joints) EPDM type including cleaning the socket and spigot ends with kerosene oil/below lamp and applying soft soap to socket and spigot ends before inserting for rubber gasket jacking and fixing in proper condition including cost of rubber gasket oil soft soap and hydraulic testing of jointing as per IS:3144-1985.;Nominal diamter in mm;300 |
| 46 | Jointing of C.I/D.I pipes and specials with rubber gaskets (TYTON joints) EPDM type including cleaning the socket and spigot ends with kerosene oil/below lamp and applying soft soap to socket and spigot ends before inserting for rubber gasket jacking and fixing in proper condition including cost of rubber gasket oil soft soap and hydraulic testing of jointing as per IS:3144-1985.;Nominal diamter in mm;400 |
| 47 | Jointing of C.I/D.I pipes and specials with rubber gaskets (TYTON joints) EPDM type including cleaning the socket and spigot ends with kerosene oil/below lamp and applying soft soap to socket and spigot ends before inserting for rubber gasket jacking and fixing in proper condition including cost of rubber gasket oil soft soap and hydraulic testing of jointing as per IS:3144-1985.;Nominal diamter in mm;450 |
| 48 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I;Nominal diamter in mm.;100 |
| 49 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I;Nominal diamter in mm.;200 |
| 50 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc .complete as directed as per IS:2685-1971 CLASS II & III.;Nominal diamter in mm.;400 |
| 51 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc .complete as directed as per IS:2685-1971 CLASS II & III.;Nominal diamter in mm.; |
| 52 | Fixing C.I. Double orifice / Kinetic type air valve of following sizes with bronze ferrule at inlet screwed on isolating valve small orifice elastic ball resting valve small orifice elastic ball resting on small bronze orifice nipple and large orifice vulcanite ball resting on moulded seat ring inlet faced and drilled to BST \\"D\\"\\" suitable to working pressure of 10 kg/sq. cm.;Nominal diamter in mm.;100\\" |
| 53 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 54 | Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering shuttering and finishing in:;All works upto plinth level |
| 55 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering shuttering finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size);All works upto plinth level |
| 56 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering shuttering finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size);In walls (any thickness) including attached pilasters buttresses plinth and string courses fillets columns pillars piers abutments posts and structs etc. upto floor five level |
| 57 | Providing and laying in position (1:2:4) reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement. (1 cement:2 coarse sand:4 graded stone agg 20mm nominal size);All works upto plinth level |
| 58 | Providing TMT steel reinforcement bars of (SAIL TATA. VIZAG JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 59 | Centering & shuttering including Strutting Propping & removal of forms for :;Foundations Footings Bases for columns |
| 60 | Centering & shuttering including Strutting Propping & removal of forms for :;Vertical surfaces such as retaing walls return walls Partitions walls (any thickness) including attached Pilasters Buttresses Plinth and string courses Fillets and the like |
| 61 | Supplying stacking at site and conveying hoisting laying in position to correct line and level and linking joints of MS specials. fabricated from MS plate including cutting bending welding procurement of plates gas cutting to required size rolling tack welding assembling in suitable length to form special welding on automatic machine and forming V edge on both ends of special as required hydraulic pressure test at factory to the required test pressure conforming to IS : 3589-1991 including freight etc. complete;With 10 mm -12 mm thick plate;Tees bends reducers |
| 62 | Supplying stacking at site and conveying hoisting laying in position to correct line and level and linking joints of MS specials. fabricated from MS plate including cutting bending welding procurement of plates gas cutting to required size rolling tack welding assembling in suitable length to form special welding on automatic machine and forming V edge on both ends of special as required hydraulic pressure test at factory to the required test pressure conforming to IS : 3589-1991 including freight etc. complete;With 25 mm thick Plate;Flanges |
| 63 | Cutting of cast iron / ductile iron pipes by mechanical grinder working on electricity including the cost of hire charges of mechanical grinder diesel operated electrical generator set suitable for supplying power for the grinder for cutting cost of grinding blades skilled work force fuel etc required for completion of job as per the direction of Engineer- in -charge;Dia in mm;300 |
| 64 | Cutting of cast iron / ductile iron pipes by mechanical grinder working on electricity including the cost of hire charges of mechanical grinder diesel operated electrical generator set suitable for supplying power for the grinder for cutting cost of grinding blades skilled work force fuel etc required for completion of job as per the direction of Engineer- in -charge;Dia in mm;400 |
| 65 | Cutting of cast iron / ductile iron pipes by mechanical grinder working on electricity including the cost of hire charges of mechanical grinder diesel operated electrical generator set suitable for supplying power for the grinder for cutting cost of grinding blades skilled work force fuel etc required for completion of job as per the direction of Engineer- in -charge;Dia in mm;450 |
| 66 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer in-charge.;Double socketed specials such as bends collar couplings etc;Nominal Diameter in mm;300 |
| 67 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer in-charge.;Double socketed specials such as bends collar couplings etc;Nominal Diameter in mm;400 |
| 68 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer in-charge.;Double socketed specials such as bends collar couplings etc;Nominal Diameter in mm;450 |
| 69 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints and including the cost of rubber ring nut bolts for flanged joint including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer in-charge.;All Socket branch flange Tee;Nominal Diameter in mm;400x100 |
| 70 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints and including the cost of rubber ring nut bolts for flanged joint including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer in-charge.;All Socket branch flange Tee;Nominal Diameter in mm;400x200 |
| 71 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints and including the cost of rubber ring nut bolts for flanged joint including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer in-charge.;All Socket branch flange Tee;Nominal Diameter in mm;400x300 |
| 72 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints and including the cost of rubber ring nut bolts for flanged joint including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer in-charge.;All Socket branch flange Tee;Nominal Diameter in mm;450x100 |
| 73 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints and including the cost of rubber ring nut bolts for flanged joint including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer in-charge.;All Socket branch flange Tee;Nominal Diameter in mm;450x150 |
| 74 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints and including the cost of rubber ring nut bolts for flanged joint including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer in-charge.;All Socket branch flange Tee;Nominal Diameter in mm;450x200 |
| 75 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints and including the cost of rubber ring nut bolts for flanged joint including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer in-charge.;All Socket branch flange Tee;Nominal Diameter in mm;450x450 |
| 76 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints and including the cost of rubber ring nut bolts for flanged joint including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer in-charge.;All Socket branch flange Tee;Nominal Diameter in mm;450x400 |
| 77 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints and including the cost of rubber ring nut bolts for flanged joint including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer in-charge.;Flanged Socket;400;900x400 |
| 78 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints and including the cost of rubber ring nut bolts for flanged joint including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer in-charge.;Flanged Socket;450;900x400 |
| 79 | Providing and applying primer coat or of fibres coal tar and solvent based rubber modified bituminous primer of density 0.92 gm/cu. cm. and viscosity of 1000-2000 cps @ 150 gms/Sqm followed by seven layers ( 4 mm thick ) of polythene polymerised bitumen ester of local 7 layers pipe coat 4 mm should conform to requirement of IS :10221 and AWWA C-203 for prefabricated tapes including Cost of material for coating and wrapping handling charges preparation of pipe surface all labour machinery etc. complete. |
| 80 | Providing and laying three coat of anticorrosive and anti-toxic surface coating for MS pipeline. The paint shall be applied after removing the scales and rust over the pipe by wire brush. Paint shall be applied uniformly to achieve uniform coating of average DFT of 60 microns per coat with the brush. 2nd coat shall be applied over the 1st coat after 8 hrs. the process shall be repeated for the 3rd coat. DFT for the final coat shall be 35 microns . Final surface shall be uniform and shall have total thickness of about 150 microns . The rate is inclusive of material transportation up to the site of work including labour machinery as required etc. complete . All three coats shall be of distinctive colour as approved be Engineer-in- charge. |
| 81 | Construction of masonry chamber 120x120x100 cm inside in 40kg/sq. cm brickwork complete with 23 cms wall thickness and in cement mortar1:4 ( 1 cement : 4 coarse sand) for sluice valve size beyond 200mm dia with necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 coarse sand: 10 graded stone ballast 40 mm nominal size) and inside plastered with CM 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement complete and chamber cover as specified below etc. all complete as per standard drawing . (rate is inclusive of rate earthwork excavation cost of surface cover and all other materials and labour and as per details below);with M.S. sheet cover with 6 mm thick M.S. plate and frame of Angle iron 50x50x6mm in 120 mm thick RCC slab cover in cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone ballast 20 mm nominal size) |
| 82 | Add or deduct for every 0.10 m depth or part thereof for brick masonry chamber.;120cm x120cmx 100cm |
| 83 | Hydralic testing of pipeline as per CLAUSE NO 6.4.4 of CPHEEO MANUAL on water supply and treatment to the required test pressusre by providing all work forcematerials reciprocating pump pressure gauge including the cost of water required maintaining the test pressure for a period of 24 hours from the time the pipe line has attained the test pressure for successful testing as per the standards required as per the direction of the engineer in-charge for ductile Iron/ Mildsteel/cast iron pipeline.;300 mm |
| 84 | Hydralic testing of pipeline as per CLAUSE NO 6.4.4 of CPHEEO MANUAL on water supply and treatment to the required test pressusre by providing all work forcematerials reciprocating pump pressure gauge including the cost of water required maintaining the test pressure for a period of 24 hours from the time the pipe line has attained the test pressure for successful testing as per the standards required as per the direction of the engineer in-charge for ductile Iron/ Mildsteel/cast iron pipeline.;400 mm |
| 85 | Hydralic testing of pipeline as per CLAUSE NO 6.4.4 of CPHEEO MANUAL on water supply and treatment to the required test pressusre by providing all work forcematerials reciprocating pump pressure gauge including the cost of water required maintaining the test pressure for a period of 24 hours from the time the pipe line has attained the test pressure for successful testing as per the standards required as per the direction of the engineer in-charge for ductile Iron/ Mildsteel/cast iron pipeline.;450 mm |
| 86 | Disinfecting C.I. water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory as per the direction of the engineer in-charge;Nominal diamter in mm.;300 |
| 87 | Disinfecting C.I. water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory as per the direction of the engineer in-charge;Nominal diamter in mm.;400 |
| 88 | Disinfecting C.I. water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory as per the direction of the engineer in-charge;Nominal diamter in mm.;450 |
| 89 | Refilling the pipeline/foundation trenches plinth sides foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge. |
| 90 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 91 | Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering shuttering and finishing in:;All works upto plinth level |
| 92 | Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering shuttering and finishing in:;In retaining walls return walls(any thk) including attached pilasters columns piers abutments pillars posts struts buttresses string or lacing courses parapets coping bed blocks anchor blocks plain window sills fillets etc upto floor five level. |
| 93 | Centering & shuttering including Strutting Propping & removal of forms for :;Vertical surfaces such as retaing walls return walls Partitions walls (any thickness) including attached Pilasters Buttresses Plinth and string courses Fillets and the like |
| 94 | Supplying and fixing of Precast RCC slabs(factory madethe factory should be ISO certified and registered under Dirctorate of Industries Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate consolidated by means of mechanical platform vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge.;Size 900 x 400 x 150 mm with steel reinforcement not less than 7 kg per unit -30 T capacity. Please Enable Macros to View BoQ information |
