|
| 1 | Maintaining all quarters and public buildings within housing colony premises by doing all kinds of day-to-day plumbing maintenance works such as maintenance /replacement of taps, valves, flush tanks, sanitary fixtures/fittings, pipes etc., at all heights including cost of all laborers, tools, tackles but excluding cost of materials all complete as directed by the Engineer.Note: Payment for materials required for plumbing maintenance works will be paid under item no.02. |
| 2 | Providing sanitary wares and plumbing fixtures / fittings of approved brand as listed below for carrying out plumbing maintenance works on residential / public buildings within housing colony premises based on actual requirement basis including cost of transportation etc., all complete as directed by the Engineer.2.01). white vitreous China Orissa pattern water closet pan of size 580 x 440 mm with integral type foot rests. |
| 3 | white vitreous china European type water closet with S-Trap conforming to IS specifications including white solid plastic seat and lid |
| 4 | white vitreous china wash basin of size 550 x 400 mm conforming to IS specifications |
| 5 | 15 mm nominal bore CP brass pillar cock |
| 6 | 15 mm nominal bore CP brass bib cock |
| 7 | 15 mm nominal bore CP brass Long body bibcock |
| 8 | 15 mm nominal bore CP brass angle cock |
| 9 | 15 mm x 450 mm PVC connection hose |
| 10 | 10 litre low level white PVC flushing cistern |
| 11 | 32 mm flexible PVC drain pipe |
| 12 | Stainless steel sink waste coupling of 40mm dia |
| 13 | Wash basin waste coupling of dia 32mm |
| 14 | 15 mm nominal bore gun metal wheel valve with CI wheel(screwed end) ISI marked |
| 15 | 20 mm nominal bore gun metal wheel valve with CI wheel(screwed end) ISI marked |
| 16 | 25 mm nominal bore gun metal wheel valve with CI wheel(screwed end) ISI marked |
| 17 | 32 mm nominal bore gun metal wheel valve with CI wheel(screwed end) ISI marked |
| 18 | 40 mm nominal bore gun metal wheel valve with CI wheel(screwed end) ISI marked |
| 19 | 50 mm nominal bore gun metal wheel valve with CI wheel(screwed end) ISI marked |
| 20 | 65 mm nominal bore gun metal wheel valve with CI wheel(screwed end) ISI marked |
| 21 | 20mm PVC pipes conforming to IS 4985 with ISI marked, 10 Kg/Sqcm |
| 22 | 25mm PVC pipes conforming to IS 4985 with ISI marked, 10 Kg/Sqcm |
| 23 | 32mm PVC pipes conforming to IS 4985 with ISI marked, 10 Kg/Sqcm |
| 24 | 40mm PVC pipes conforming to IS 4985 with ISI marked, 10 Kg/Sqcm |
| 25 | 50mm PVC pipes conforming to IS 4985 with ISI marked, 10 Kg/Sqcm |
| 26 | 63mm PVC pipes conforming to IS 4985 with ISI marked, 10 Kg/Sqcm |
| 27 | 90mm PVC pipes conforming to IS 4985 with ISI marked, 10 Kg/Sqcm |
| 28 | 110mm PVC pipes conforming to IS 4985 with ISI marked, 6 Kg/Sqcm |
| 29 | 110mm PVC pipes conforming to IS 4985 with ISI marked, 10 Kg/Sqcm |
| 30 | 160mm PVC pipes conforming to IS 4985 with ISI marked, 10 Kg/sqcm |
| 31 | 20 mm PVC fixtures |
| 32 | 25 mm PVC fixtures |
| 33 | 32 mm PVC fixtures |
| 34 | 40 mm PVC fixtures |
| 35 | 50 mm PVC fixtures |
| 36 | 65 mm PVC fixtures |
| 37 | 75 mm PVC fixtures |
| 38 | 90 mm PVC fixtures |
| 39 | 110 mm PVC fixtures |
| 40 | 160 mm PVC fixtures |
| 41 | 15 mm GI fixtures |
| 42 | 20 mm GI fixtures |
| 43 | 25 mm GI fixtures |
| 44 | 32 mm GI fixtures |
| 45 | 40 mm GI fixtures |
| 46 | 50 mm GI fixtures |
| 47 | 75 mm GI fixtures |
| 48 | 90 mm GI fixtures |
| 49 | 90 mm flexible PVC hose |
| 50 | 65 mm hose clamp |
| 51 | 15 mm ceramic spindle suiting to Hindware pillar cock |
| 52 | 15 mm ceramic spindle suiting to Metro bib cock/pillar cock |
| 53 | PVC Solvent cement |
| 54 | M-SEAL Regular Epoxy Compound (90g) |
| 55 | Gasket shellac compound (25g) |
| 56 | Tafflon Tape (12mmx0.10mmx10mtr) |
| 57 | 20 mm siphon nylon washer |
| 58 | PTMT Towel rod |
| 59 | Maintaining of all quarters and public buildings within housing colony by doing all kinds of day- to- day carpentry maintenance works such as replacing of damaged styles and rails of doors/windows, replacing of all damaged fixtures, replacing of glass panes, AC sheets etc., at all heights including tools and tackles but excluding cost of materials all complete as directed by the Engineer.Note: Payment for materials required for carpentry maintenance works will be paid under item no.04. |
| 60 | Providing carpentry fixtures / fittings of approved brand as listed below for carrying out carpentry maintenance works on residential / public buildings within housing colony premises based on actual requirement basis including cost of transportation etc., all complete as directed by the Engineer.4.01). 3\\" Stainless steel Butt hinges |
| 61 | 4\\" Stainless steel Butt hinges |
| 62 | 5\\" Stainless steel Butt hinges |
| 63 | 6\\" Stainless steel Butt hinges |
| 64 | 3\\" Aluminium Tower Bolt |
| 65 | 4\\" Aluminium Tower Bolt |
| 66 | 6\\" Aluminium Tower Bolt |
| 67 | 4\\"Aluminium door handle |
| 68 | Aluminium sheet |
| 69 | Hydraulic door closer |
| 70 | Mortice lock - 6 Lever |
| 71 | Door stopper |
| 72 | Judes eye |
| 73 | 2\\" Stainless steel Hook |
| 74 | 3\\" Stainless steel Hook |
| 75 | 6\\" Stainless steel Hook |
| 76 | 8\\" Stainless steel Hook |
| 77 | Door chain lock |
| 78 | Nylon mosquito net |
| 79 | Nylon Rope- 20mm |
| 80 | Cupboard lock |
| 81 | 4mm Thick plain glass |
| 82 | 6mm thick waterproof plywood |
| 83 | 12mm thick waterproof plywood |
| 84 | 19mm thick waterproof plywood |
| 85 | Concrete Steel Nail (Size varies from 1\\" to 3\\") |
| 86 | SH Synthetic resin adhesive (FEVICOL) |
| 87 | SR998 Synthetic rubber adhesive (FEVICOL) |
| 88 | Standard epoxy adhesive (ARALDITE) 25g |
| 89 | Maintaining of all quarters and public building within housing colony premises for doing all kinds of day-to-day maintenance works such as replacing of damaged water closets, re-laying of damaged kitchen platforms, arresting leakages through roof, chajja and upper floor toilets, replacing of damaged roof tiles, clamping of loosened door frames, repairing of cracks in wall/ water tanks,repairing of inspection chambers/manholes, miscellaneous patch works etc., at all heights including cost of all laborers, tools and tackles etc., complete as directed by the Engineer. Note: Payment for materials required for masonry maintenance works will be paid under item no.06. |
| 90 | Providing construction materials of approved quality as listed below for carrying out masonry maintenance works on residential / public buildings within housing colony premises based on actual requirement basis including cost of transportation, stacking etc., all complete as directed by the Engineer.6.01). Portland pozzolana cement (PPC) conforming to IS 1489 Part-I in 50 kg HDPE bags |
| 91 | Medium graded grey M-sand/River sand conforming to IS 383 |
| 92 | Well burnt clay chamber bricks of approved brand conforming to IS 1077 |
| 93 | Antiskid ceramic floor tiles of approved brand and quality in size 300 mm x 300 mm |
| 94 | 3\\" nominal dia cp gratings |
| 95 | 5\\" nominal dia cp gratings |
| 96 | White cement |
| 97 | Nitozinc primer |
| 98 | Nitobond EP |
| 99 | Renderoc SP 40 in 25kg bags Please Enable Macros to View BoQ information |
