|
| 1 | Supply, installation of Fully Loaded drawout type, SC type 24-port Fiber Distribution (LIU)System of 1U size suitable for mounting in 19\\" rack. |
| 2 | supply, installation of 9U wall mount network rack of 19\\" size side openable with fully loaded with all accessories. |
| 3 | Supply, installation of Fully Loaded drawout type, LC type 24-port Fiber Distribution (LIU)System of 1U size suitable for mounting in 19\\" rack. |
| 4 | Supply, installation of Outdoor IP66 12U network rack of 19\\" size fully loaded with all accessories. |
| 5 | Supply, installation of 10-port (8-port RJ45, 2-port SFP) 120W POE L2 Industrial Ethernet Switch along with mounting accessories and power supply arrangement. |
| 6 | Supply, installation of 10-port (8-port RJ45, 2-port SFP) 240W POE L2 Industrial Ethernet Switch along with mounting accessories and power supply arrangement. |
| 7 | 28-port (24x1 Gbps RJ-45 Copper port, 4x1/10 Gbps SFP port) web-managed layer-2 network switch |
| 8 | 1Gbps Single Mode (SFP) 1000BASE-LX LC transreceiver Module compatible with supplied ethernet switches |
| 9 | 2MP IP based fixed dome cctv camera with all accessories |
| 10 | 5MP IP based varifocal outdoor bullet cctv camera with all accessories |
| 11 | Cat6 cable for lift(elevator) cctv application |
| 12 | Cat-6 RJ45 Connector with end termination |
| 13 | Cat-6 Patch cords, 1 meter |
| 14 | Cat-6 Patch cords, 2 meter |
| 15 | SC-SC SM Duplex Fiber Patchcords 2 meter length |
| 16 | SC-LC SM Duplex Fiber Patchcords 15 meter length |
| 17 | LC-LC SM Duplex Fiber Patchcords 2 meter length |
| 18 | LC-LC SM Duplex Fiber Patchcords 5 meter length |
| 19 | 24-Port CAT6 Patch panel of 1U size suitable for 19\\" rack fully loaded with all wiring support accessories. |
| 20 | 2-modular PVC box including cover plate with face plate with 2 nos of RJ45 socket(UTP/STP) with shutter and connector |
| 21 | Supply 24-core Armoured Single Mode (9/125 um) Multi-tube loosely buffered Fiber optic cable |
| 22 | 24 core armoured cable OFC Splicing jointing kit for underground cable |
| 23 | 23AWG CAT6 unarmoured UTP cable |
| 24 | 23AWG CAT6 armoured UTP cable |
| 25 | Supply 40mm HDPE pipe for laying of cable |
| 26 | 32 mm Galanized Steel Flexible Metal conduit/pipe with all fixtures(PVC coated) |
| 27 | Laying of 24-core Armoured Single Mode (9/125 um) Multi-tube loosely buffered Fiber optic cable. |
| 28 | Laying of 40mm HDPE pipe for laying of cable |
| 29 | Fiber optic splicing and termination of connections. |
| 30 | Supply and installation of cable route marker with tagging arrangement |
| 31 | Excavation in all type of soils of approx. 600 mm width and approx. depth of 1000 mm below ground level(varying depth and width as per site condition), sand bedding, Laying of bricks on side and top, back filling, disposal of excess earth. Item includes supply of sand and bricks. |
| 32 | Underground cable inspection chamber with manhole and GI/FRP cover with approx 1100 mm width at bottom and approx. depth of 1000 mm as per site condition. |
| 33 | Providing, Laying, fixing, and installation of 300 mm Dia. RCC hume pipe NP2 class (light duty) inclusive of road cutting of approx. depth 1500 mm complete with RCC collars, Jointing with cement mortar 1:2 (1 cement:2 fine sand), 100 mm thick concrete encasing the pipe of 1:2:4 grade, backfilling and concreting (1:2:4) with M30 grade of 200mm thick and as per the tender technical specifications. |
| 34 | Supply, Fabrication and Installation of Standard steel sections as per IS 2062 for cable tray supports, base frames for panels, anchor fasteners, wall frames and brackets for supporting equipment. Fabrication shall include drilling, entiling, welding, wire brush cleaning, supply of all consumables like gas, welding rods. After fabrication two coats of epoxy based primer and two coats of finish paint shall be applied. |
| 35 | Supply, installation of 25x38mm PVC Casing capping with all fixtures and accessories (Bends, joints, saddles, screws, etc.). |
| 36 | Supply, installation of 25mm GI Conduit Pipe for laying of cable along with all fixtures (bends, joints, junction box, etc.) and saddle and spacer needed for piping. Please Enable Macros to View BoQ information |
