|
| 1 | Survey, Demarcation, Cleaning of bushes, Uprooting of ipomia and cutting of trees from the campus for alignment etc. complete. |
| 2 | Earth work excavation of foundation in Hard Soil within initial lead and lift etc. complete. |
| 3 | Filling Foundation and plinth with well graded sand including watering and ramming |
| 4 | C.C. (1:4:8) with 40mm size crusher broken granite metal in F&P etc. all complete. |
| 5 | Rigid & smooth centering and shuttering in foundation etc. all complete.(a) Column upto Plinth |
| 6 | (b) Column in Super Structure |
| 7 | M -20 grade R.C.C. using 20mm&down graded chips crusher broken Column base, Column & Plinth Band |
| 8 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification |
| 9 | Fly Ash Brick work having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:6) in F & P. |
| 10 | Fly Ash Brick work having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:6) in superstructure in ground floor |
| 11 | Providing 12 mm thick C.P. (1:6) on brick wall |
| 12 | Providing Cement washing 2 coats etc. Complete. |
| 13 | Finishing walls with water proofing cement paint of approved shade on new work 2 coats to give an even shade including cost of brushes and putty including cost of paint. |
| 14 | Iron work wrought and put up in grated doors,windows and cage latrines of Hollow GI Pipes |
| 15 | Angle 50x50x5 mm size |
| 16 | Dismantling brick or stone masonary in lime or cement mortar under 3m height incl. staking of useful material |
| 17 | Fly Ash Brick work having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:6) in superstructure in ground floor |
| 18 | Providing 12 mm thick C.P. (1:6) on brick wall |
| 19 | cement washing two coats over brick work |
| 20 | Painting 2coats with any approved iron paint on new iron work |
| 21 | Barbed wire 4pin 2 ply in 4 rows at 0.3m spacing over top of the wall |
| 22 | Labour for fixing barbed wire fencing and post by means of staples and straining hooks by means of tying with G.L wire and including cost of staples, hooks and tying wires |
| 23 | Providing and fixing concertina coil fencing with punched tape concertina coil 600mm diameter 10m openable length(total length 90m), having 50 nos rounds per 6m length,upto 3m height of wall within existing angle iron (Y\\") shaped placed 2.4m or 3m apart and with 9 horizontal R.B.T reinforced barbed wire,stud tied with G.I staples and G.I clips to retain horizontal,including necessary bolts or GI barbed wire tied to angle iron,all complete as per direction of Engineer-in-charge,with reinforced barbed tape(R.B.T)/Spring core (2.5mm thick) wire of high tensile strength of 165kg/sq.mm with tape(0.52 mm thick) and weight 43.478 gm/m(Cost of MS Angle and CC Block Separately) |
| 24 | Approach Road with Paver Block |
| 25 | Excavation of foundation in Hard soil within 50m initial lead and 1.5m initial lift |
| 26 | Rolling and compacting to sub grade or formation loosening by cutting ordinary earth for 0.15 Mtr. depth including watering and rolling by PRR as per specification and direction of Engineer-in-charge |
| 27 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per Clause 404 of MoSRT&H Specifications for Road & Bridge works (4th Revision)(a) Granular Sub Base using stone screened dust |
| 28 | (b) WBM Base using Type-A 13.2mm Stone Screening |
| 29 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63:2018. |
| 30 | Vehicle Stand |
| 31 | Excavation of foundation in Hard soil within 50m initial lead and 1.5m initial lift |
| 32 | Rolling and compacting to sub grade or formation loosening by cutting ordinary earth for 0.15 Mtr. depth including watering and rolling by PRR as per specification and direction of Engineer-in-charge |
| 33 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per Clause 404 of MoSRT&H Specifications for Road & Bridge works (4th Revision)(a) Granular Sub Base using stone screened dust |
| 34 | (b) WBM Base using Type-A 13.2mm Stone Screening |
| 35 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63:2018. |
| 36 | Iron work wrought and put up in trusses and record racks SHS |
| 37 | Labour for fixing G.C.I. Sheet in roof drilling hole in wind ties including fixing of ridges valleys wind ties etc. excluding cost of fitting per 1 Sqm |
| 38 | Cement Concrete(1:2:4)with12 mm size Hard Granite Chips (Crusher broken) |
| 39 | Conference Hall |
| 40 | Brick Work with Fly Ash Bricks having crushing strength 75kg/sq.cm in cement mortar (1:6) in Super Structure |
| 41 | RCC Work M-20 grade with 20 mm and down grade HG chips (CB)(a) Column & Beam |
| 42 | (b) Chajja |
| 43 | (c) Lintel |
| 44 | (d) Roof |
| 45 | Straightening,Bending,Binding of M.S.Rod |
| 46 | 16mm thick cement plaster in C.M(1:6)over brick work F.F. |
| 47 | 12 mm thick cement plastering C.M. (1: 6) F.F. |
| 48 | 6mm thick cement plaster in C.M(1:4) R CC surfaces F.F. |
| 49 | Priming 1 coat with any approved Primer F.F. (inside) |
| 50 | Priming 1 coat with any approved Primer F.F. (out side) |
| 51 | Finishing walls with water proofing weather coat paint of approved shade on new work to give even shade |
| 52 | Fitting vitrified tiles in floors,treads or steps and landing on 25mm thick bed of cement mortar(1:1) joined with neat cement slurry mixed with pig ments including cost of tiles , G.F. |
| 53 | Fitting vitrified tiles in dadoes skirting and riser of steps on 12mm thick cement plaster(1:3) joined with neat cement slurry mixed with pigments to match the shade of tiles including rubbing &polishing complete including cost of tiles, G.F. |
| 54 | Supplying, fitting and fixing Anti-Skid ceramic tile in floors, treads of steps and landing on 20mm thick cement mortar(1:4) |
| 55 | Providing and fixing Glazed Ceramic tiles in wall dadosand skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) |
| 56 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 57 | Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member |
| 58 | Providing, fitting and fixing of false ceiling with 12 mm thick gypsum board |
| 59 | Supplying fitting and fixing of FRP door frame of size 75X100mm |
| 60 | Supplying fitting of Factory made single Leaf Regid FRP composite door Shutter of 32mm thick, |
| 61 | Supplying of MS Doors of windows |
| 62 | Priming one coat with any approved red oxide over steel work. |
| 63 | Painting 2coats with any approved iron paint on new iron work. |
| 64 | 2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size CB hard granite chips |
| 65 | Supplying and fixing Rotational moulded polithylene cylindrical vertical water storage tanks (SYNTEX) |
| 66 | Providing & fixing false to wall or ceiling and floor UPVC pipes class IV |
| 67 | Supply and fixing of MCM Modified Clay Material - MCM R Series Brick (087089) - 222 x 63 mm of PHOMI make, as per company standard dimension, |
| 68 | Providing & fixing false ceiling of Alm anodised T section no 3215 with 2'-0\\" center to centre,L section no 1705 up to 15 micron on 4 walls to be fixed by means of steel screw and PVC plug and the Alm grid 2'-0\\"x2'-0\\" with 12mm thick Acoustic Board |
| 69 | Electrical InstallationRecessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front modular cover of suitable size , MS modular box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) |
| 70 | Group A |
| 71 | Group B |
| 72 | Group C |
| 73 | Supplying and fixing of 5/6 amp one way modular type switch on existing switch box/cover including connections etc as required. |
| 74 | Supplying and fixing of 5 pin 5/6 amp socket outlet modular type on existing switch box/cover including connections etc as required. |
| 75 | Supplying and fixing of 15/16 amp one way modular type switch on existing switch box/cover including connections etc as required. |
| 76 | Supplying and fixing of 6 pin 15/16 amp one way modular socket outlet piano type on existing box/cover including connections etc as required. |
| 77 | Supplying and fixing batten holder/BK angle holder ISI marked including connection etc. as required. |
| 78 | Supplying and fixing of 25 mm PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required. |
| 79 | Supplying and fixing of 3 pin, 5 amp ceiling rose ISI marked on the existing junction box / wooden block including connection etc. as required |
| 80 | Installation,Testing andCommissioning of pre-wired fluorescent fiiting /compact fluorescent fitting of all sizes complete with all accessories and tube etc. directly on ceiling wall, including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required. (Flood Light, 50W rating) |
| 81 | Installation, Testing and Commissioning of ceiling fan, including wiring the down rods of standard length (upto30cm) with1.5sq.mm FR PVC insulated single core multistrand copper conductoretc. including providing and fixing phenolic laminated sheet steet cover on the fan box etc as required. |
| 82 | Installation,Testing and Commissioning of resistance type ceiling fan regulator, in existing switch box including connection with 1.5sq.mm FR PVC insulated single core multistrand copper conductor,earthing the regulator as required. |
| 83 | Extra for cutting and threading of G.I. pipe, heavy gauge down rod, for ceiling fan etc. as required. |
| 84 | Providing and fixing of following capacity TP& N disconnector fuse switch unit inside existing cubical panel board with ISI marked HRC fuses including drilling holes in cubical pannel, making connection etc as required. |
| 85 | Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR) (4 WAY, SINGLE DOOR) |
| 86 | Supply and fixing of 5 amp to 32 amp rating 240 V \\"C\\" series miniature circuit breaker suitable for inductive loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required. (TRIPLE POLE AND NEUTRAL) |
| 87 | Supply, Installation, Testing, and Commissioning of 32 Amp DP Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. as required as per direction of Engineer in Charge. Make SEIMENS/ HPL/ ANCHOR/ L&T/ HAVELS/ C & S/ RK (32 Amp DP) |
| 88 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc (but with out charcoal and salt ) as required |
| 89 | Extra for using salt and charcoal for G.I or copper pipe earth electrode as required |
| 90 | PH Installation |
| 91 | Laying of 110mm nominal diameter UPVC sewer line including cost of materials. |
| 92 | Providing & Fixing to walls/floor the following nominal diameter pipe, fittings including cost of pipe, making good the damage, etc.25mm dia PVC pipe in ground floor |
| 93 | 20mm dia PVC pipe in ground floor |
| 94 | 15mm dia PVC pipe in ground floor |
| 95 | Cutting the G.I./Black iron pipes and inserting a fitting 15mm to 25mm |
| 96 | Cutting grooves in pucca floor and walls for taking G.I/PVC pipe and making good the damage in ground floor |
| 97 | Cutting holes through the brick or laterite masonary wall for taking G.I/PVC pipe and making good the damage in ground floor |
| 98 | Supply, fitting and fixing of CP concealed screw down stop cock of 15mm diameter in ground floor |
| 99 | Supply, fitting and fixing of brass or G.M.fullway valve of following nominal diameter etc. complete including cost of all materials. 25mm dia |
| 100 | Supply, fitting and fixing of C.P. screw down bib cock (tap) of 15mm diameter in ground floor |
| 101 | Supplying all Materials,labour, T&P fitting,fixing of Porcelain 22\\"x 16\\"(550x400) Wash basin with hole for pillar taps conformoing to IS 2556 : Part 4-2004 with cast iron or M.S Brackets painted white cement including cutting holes in walls and making good the damages etc. All complete as per specificationand direction of the Engineer-in-charge. |
| 102 | Flexible (coil shaped) PVC waste pipe for sink & wash basin 40mm dia with length not less than 700 mm long waste fittings |
| 103 | Supplying all Materials,labour,T&P and fitting, fixining of Wash down water Closet (Europian type W.C pan) with Integral\\"S\\" or \\"P\\" trap |
| 104 | Supply, fitting and fixing of Parryware make PVC low level 10l capacity cistern with complete fixtures, all complete in ground floor and first floor as per specification and direction of engineer in charge. Please Enable Macros to View BoQ information |
