|
| 1 | Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works20mm size [7(a)/ E-16 ] |
| 2 | 25mm size 7(b)/ E-16 ] |
| 3 | Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in 19mm/25mm prelaid polythene pipe/PVC rigid conduit as per GS2x(4 sqmm)+1(2.5sqmm) [ 1(v) / E- 9 ] |
| 4 | S&F solderless copper socket by crimping of copper wires .2.5 sq mm [9(i) / F-5] |
| 5 | 4 sq mm [9(ii) / F-5] |
| 6 | Supplying & Fixing sheet metal inspection.box (16 SWG) of thefollowing sizes(in mm ) flushed in wall & 3 mm thick bakelliteCover as oer GS175 x 100 x 65 11(c)E-4,13(c)/E-51 |
| 7 | Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection withsuitable size of copper wire and neutral link & provision for earthing attachment .4 way ( Make - Legrand/Siemens/L&T as approved by E.I.C ) [ 14 / D- 10 ] . [LTTD04N] |
| 8 | Supplying and fixing 240/415 V MCB lsolator on din rail ofexisting DBs and necessary connection as per GS [Make Legrand/ Schneider/Siemens/ Crabtree/ L&T) as per direction of E.I.C ]63A FP [6/D-5] |
| 9 | Supplying and fixing 240/415 V MCB of Breaking capacity 1OkA& C characteristics on din rail of existing DBs and necessaryconnectionas per GS [Make-Legrand/Schneider/Siemens/Crabtree/L&T) as per direction of ElC. ]6-32A SP [7/D-6] |
| 10 | Supply of 4 Core XLPE Insulated & Sheathed ArmouredAluminium Conductor cables for Working Voltage up to 110(Volts of following sizes [Make-Gloster/KEl/Havells as approved by E.I.C]4 Core 35 sqmm |
| 11 | Laying of cable from 3/3.5 core 35 sqmm to 50 sqmm on wall/surface inclS & F MS saddles with earthing attachment in 2 x 10 SWG Gl (Hot DiplWire, making holes etc. as necy , mendinggood damages and painting [ 2(C)/F- 1] |
| 12 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :4 Core 35 sqmm [7(c)/F-4] |
| 13 | Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc. 4 Core 35 Sq. mm [8(b-xiii) /F5] |
| 14 | Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket(Brand approved by EIC), without plug top and switch with 2Module Gl Modular type switch board with top cover plateflushed in wall and making necy. connections with PVC Cu wireand earth continuity wire etc. [5(a)/E-17] |
| 15 | Supply & Fixing 240 V, 25 A, Modular type starter (Brandapproved by EIC) with 25A Modular switch type DP MCB(CCurve) and 4 Module Gl Modular type switch board with 4Module top cover plate flushed in wall incl S&F switch board andcover plate and making necy. connections with PVC Cu wire andearth continuity wire etc. [17lE-19] |
| 16 | Supply & Fixing 240 V,25 A, 3 pin Modular type plug top withindicator (Brand approved by EIC) & necy. Connections [5(b)/E-17] |
| 17 | S&F of 250V timer DB (equivalent to 12 way SPNDB in size) with doubledoor sheet steel enclosure, neutral bar, din rail, with lP43 protectioncomprises with 25 A DPMCB(C-curve 1oka) and 1 no 24 hr. analog timeswitch and 1 no 25 A power contactor complete with internal wiring withsuitable size of copper wire including 1 no toggle switch and LEDindicator and earthing attachment as per direction of EIC (For 01no Split AC )(Make-L&T/Siemens/ABB) |
| 18 | SITC of 1.5 ton capacity Hi-wall split Air -conditioner machine fitted with hyper tropical rotary compressors suitable for Refrigerant -R410A/R32, cooling capacity-18000 btu/hr , air flow -600 cfm of rated power supply 230 V-1 Ph-50 Hz along with all accessories (Make- Mitsubishi Electric/O-General or euivalent model approved by EIC). incl. Supply & fixing required Angle Iron Structure on wall & mending works as per direction of E.I.C. |
| 19 | SITC of 2.0 ton capacity Hi-wall split Air -conditioner machine fitted with hyper tropical rotary compressors suitable for Refrigerant -R410A/R32, cooling capacity-24000 btu/hr , air flow -800 cfm of rated power supply 230 V-1 Ph-50 Hz along with all accessories (Make- Mitsubishi Electric/O-General or euivalent model approved by EIC). incl. Supply & fixing required Angle Iron Structure on wall & mending works as per direction of E.I.C. |
| 20 | Supply & laying Add-on items- 5/8\\"(for suction) & 1/4'(for discharge ) copper refrigerant pipe with 9mm thick nitrile rubber insulation , 4 core x 2.5 sqmm . Copper cable including fixing arrangement and wrapping insulation of aerotape complete in all respect for ( 1.5tr. & 2tr. A.C. Machine and supply & laying PVC Drain Pipe 25mm dia by saddling on wall incl. PVC \\"T\\" ,elbow, bend etc as per direction of E.I.C. |
| 21 | S&F of 25mm Dia uPVC pipre for AC drain pipe on wall, ceilingwith saddles and other accessories as required and mending good damages to building works |
| 22 | 1. THE AGENCY MUST PROCURE THE MATERIALS FROM THE MANUFACTURER/OEM OR FROM THEIR AUTHORIZES. SALES CHANNEL SO THAT THE STANDARD WARRANTY / SUPPORT OF THE MANUFACTURER / OEM BECOMES APPLICABLE TO THE PRODUCTS TO BE DELIVERED AND INSTALLED BY THEM.2. DOCUMENTS THAT AUTHENTICATES SUCH PROCUREMENT FROM THE MANUFACTURER/OEM OR FROM THEIR AUTHORIZES SALES CHANNEL SO THAT THE STANDARD WARRANTY / SOPPORT SHOULD BE SENT FROM THE e-MALE OF THE MANUFACTURER/OEM / AUTHORIZES SALES CHANNEL TO THE e-MALE OF ENGINEER-IN-CHARGE AND HARD COPY OF IT TO BE SUBMITTED DURING EXECUTION OF WORK/ SUBMISSION OF BILL.3. IF ANY REFURBISHED MATERIAL IS SIPPLIED ABD INSTALLED, PENAL ACTION WILL BE TAKEN AS PER EXISTING RULES. Please Enable Macros to View BoQ information |
