|
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR Select, At Par, Excess (+), Less (-) IOCL Tender Inviting Authority :- EXECUTIVE ENGINEER PROVINCIAL DIVISION PWD B&R JALANDHAR Name of Work :- DNIT FOR CONVERSION OF ROOM INTO NEW WASHROOM AT COURT ROOM NO. 320 JUDICIAL COURTS COMPLEX JALANDHAR Contract No: Civil Works Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Work Name Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | A1) ADDITION/ ALTERATION WORK OF EXISTING ROOM TO BE CONVERTED INTO NEW WASHROOM |
| 3 | Dismantling glazed tiles (to be carefully removed). |
| 4 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. |
| 5 | Extra Rate For 2nd Floor |
| 6 | Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by manual means |
| 7 | Extra for R.C.C/PCC. work done in each subsequent storey above the first storey up to height of 4 metres or part thereof up to the roof top level of that storey. |
| 8 | First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level |
| 9 | Extra for work done in additional storey upto 4 metre above the top of structural roof of lower storey for Brick Work/ Concrete Block/ Clay Block. |
| 10 | Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. i With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) size 595x595 mm |
| 11 | 12.5 mm thick cement plaster 1:5 |
| 12 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 13 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade |
| 14 | Extra rates for white washing, distempering, painting and decorative cement based paints etc for superstructure Where any single storey height exceeding 4 mtr in height for everyadditional height of 2 mtr or part thereof (External or Internal) |
| 15 | Supply & Fixing of Door Frames ( Chowkhat) Including Mullions Consisting Frame fabricated from Sheet roll Formed Out of 1.2 mm thick galvanized sheet as per IS: 277) base steel as per IS:513) with zinic of 120gm/Sqm powder coated with pure polyester powder upto 50 micrones (as per approved colour), 3 Nos 100 mm butt hinges 2mm thick, 6 Nos 1.2 mm thick CRCA Electroplated Stiffner plate 200mm long reciever for aldrop, M.S tie Rod 50 mm x 25 mm to be fixed bottom finished with powder coating total thickness pf coating 0.60 mm of approved shape, fixed in position including the cost of cement concrete for 1:2:4 for fixing lugs complete in all respects as per design, drawing, specification & Entire Specifications of Engineer-in-Charge.b) Door Frame of Size 125mm x 60mm with 37 mm wide Double Rebate for 35mm door Shutter |
| 16 | Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position(Code : IS 2202-1 (1999):(a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:-(iv) 35mm thick |
| 17 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position |
| 18 | Providing Polyester Powder coating 60 to 70 micron any coloured specified to M.S Grill section of various sizes including carriage of material from market to workshop & workshop to site of work. |
| 19 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. Complete(c) I.S.I Designation No. III (size of door 851mm to 1000mm) |
| 20 | Providing & fixing 6\\" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. |
| 21 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt)ii) For shutter area above 0.50 sqm |
| 22 | Providing and Fixing Single Glazing with 6mm thick glass with high perfromance coating as per relevent codal provisions as per satisfaction of Engineer-in-Charge. |
| 23 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :a) 300mm x 16mm |
| 24 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 25 | Providing and applying Anti Termite Treatment using post constructional chemical treatment measures as per IS - 6313 - 2001 ( Part 3 ) & using Chemical containg chloropyrifos systemic insecticide diluted to manufacturer's specifications by drilling holes in the floor slab & along skirting 300 mm apart & 12 mm dia, drilling holes along all possible entry points such asjunctions of floor and walls, door frames, sewage lines, entry points , etc. & injecting them with the chemical solution.Note :- The Engineer in Charge will ensure consumption of chemical as per manufacturer's specifications & minimum 5 years warranty from the concerned dealer. |
| 26 | Renewing glass panes with putty and nails wherever necessary(b) Glass panes weighing 10.75 Kg/sqm |
| 27 | B-2) PUBLIC HEALTH |
| 28 | Sub Head 1 - Sanitary Installation |
| 29 | Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 30 | Chinaware Floor Mounted One Piece EWC rim less type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) size 69x36x74 cm with P trap or S trap and seat cover complete in all respect. |
| 31 | Providing and fixing Stainless steel health faucet complete in all respect. |
| 32 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. |
| 33 | Size 49 cm dia (above counter round) |
| 34 | Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 35 | Note:-To be provided only for VIP Installations and with prior approval of the Engineer-in-charge. |
| 36 | C.P. Brass Accessories: |
| 37 | C.P. brass towel rail 600 mm long |
| 38 | C.P brass towel ring square |
| 39 | C.P. brass toilet roll holder with flap |
| 40 | C.P. brass towel rack 600mm long with lower hangers |
| 41 | C.P. brass soap dish holder with glass dish |
| 42 | C.P. Glass Shelf 600mm long |
| 43 | C.P. Brass fittings: |
| 44 | C.P. brass 3-Hole Basin Mixer Without Popup Waste System |
| 45 | C.P. brass Bib cock with Wall flange |
| 46 | C.P.brass 15mm Angular stop cock with Wall flange |
| 47 | C.P. brass 15mm Concealed stop cock with adjustable wall flange with seal.(Outer +Inner Body) |
| 48 | Providing & Fixing in postion liquid soap container of approved make (to the approval of Engineer-in-charge ) complete in all respect.(A)C.P. brass liquid soap Dispanser |
| 49 | Providing & Fixing in position mirror of superior glass Size 1500mm x600mm or any other required size (of approved quality) and of required shape and size with high quality polystyrene moulding frame of 40 to 50mm size (of approved quality and shade) with 4mm thick hardboard backing fixed in with rawl plugs 50mm, C.P. brass screws and washers complete in all respect |
| 50 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect |
| 51 | PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut |
| 52 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 53 | Providing and fixing in position C.P. brass bottle trap 32mm dia with 40 mm seal of approved make (to the approval of Engineer- in-charge) complete in all respect. |
| 54 | Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. ii)25mm i/d Brass Ball valves |
| 55 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. |
| 56 | Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect. |
| 57 | i) C.P. Brass extension piece, 25mm long to 50mm long |
| 58 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer - in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. |
| 59 | Triple Layer Tanks |
| 60 | Construction of Platform for HDPE tanks complete in all respect. |
| 61 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. |
| 62 | G.I. tank nipple 25mm i/d |
| 63 | G.I. tank nipple 32mm i/d |
| 64 | Providing and fixing in position automatic brass Ball Cock in tanks. |
| 65 | Brass Ball Cock with rod and Plastic Ball |
| 66 | 25mm i/d |
| 67 | Prov & Fixing Aluminium door with frame complete in all respect |
| 68 | Sub Head 2 -Internal Water Supply |
| 69 | CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. |
| 70 | b) CPVC SDR 11 Pipe & fitting 20mmo/d |
| 71 | c) CPVC SDR 11 Pipe & fitting 25mmo/d |
| 72 | d) CPVC SDR 11 Pipe & fitting 32mmo/d |
| 73 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. |
| 74 | Size 150 mm x 150 mm |
| 75 | Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 76 | Through wall 11.43 cm thick |
| 77 | Through wall 22.86 cm thick |
| 78 | Dismantling concrete |
| 79 | Cement concrete plain1:2:4 mix |
| 80 | Sub Head 3 -Internal & Estate Sewerage System |
| 81 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonagepipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. |
| 82 | Single Socket Type B |
| 83 | b) 110mm o/d SWR UPVC pipe lines laid complete |
| 84 | b) 160mm o/d SWR UPVC pipe lines laid complete |
| 85 | Providing and fixing PVC pipes & specials 4kg/ cm2 including cost of earth work in excavation & back filling as per analysis A 14 complete in all respects. (By Manual)For 160 mm o/d PVC Pipe |
| 86 | Providing and fixing in position SS Gratingwith frame of approved make (to the approval of engineer in charge) complete in allrespects |
| 87 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. |
| 88 | For 110mm o/d pipes |
| 89 | ii) Single Tee With Door |
| 90 | iii) Single Tee |
| 91 | iv) Door Elbow 90 Degree |
| 92 | vi) Vent Cowls |
| 93 | vii) Reducer 110mm x 75mm |
| 94 | ix) P Trap/Floor Trap 110mm x 110mm |
| 95 | xi) Single Y-Junction |
| 96 | (v) Elbow 90 Degree (All side socketed) |
| 97 | For 160 mm o/d pipes |
| 98 | ii) Single Tee With Door |
| 99 | iii) Single Tee |
| 100 | iv) Door Elbow 90 Degree |
| 101 | v) Elbow 90 Degree |
| 102 | Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement,R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming toI.S.I complete as per standard design. |
| 103 | Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal |
| 104 | Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm. |
| 105 | 100mm internal Diametre H.C.I. gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x330mm |
| 106 | Sub Head 4 - Flooring Wall Tiles & Dismantling |
| 107 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/ Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x600 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 108 | Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material |
| 109 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. |
| 110 | Dismantling concrete |
| 111 | Cement concrete plain1:2:4 mix |
| 112 | Cement concrete 1:2:4 |
| 113 | a With stone ballast or shingleI mixing by manual means |
| 114 | C-3 ) ELECTRICAL WORK |
| 115 | RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: |
| 116 | Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\\" deep for walls and CI 3\\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- |
| 117 | Wiring light point |
| 118 | Wiring 6Amp. Plug control comprising wall socket point |
| 119 | Wiring 16/20Amp. power plug control point |
| 120 | PVC INSULATED FR COPPER CONDUCTOR CABLES: |
| 121 | Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 122 | Overall size 2.5sq.mm (Un-sheathed) |
| 123 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES: |
| 124 | Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- |
| 125 | Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface) |
| 126 | Supply and erection of LED batten 20watt LED (including LED driver) with High quality extruded aluminium with efficacy of LED fixture with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.CD). The certification and Specification of the LED fitting should be as approved by O/o Advisor(Technical) , Govt. of Punjab vide Letter no. AT/2021/GL/1410-1422 Dated 06/05/2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory. |
| 127 | Supply and Erection of Venti Air Fan 250mm with louver shutter longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the engineer in-charge at site. Total in Figures 593145.0 593145.0 INR Five Lakh Ninety Three Thousand One Hundred & Forty Five Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
