|
| 1 | Dismainteling brick mesonary in cement morter under 3M(10'') height including stacking the useful materials for reuse and removing the debries within 50M lead including cost of all labour, T&P etc. required complete as direction by the Engineer-in-charge |
| 2 | Supplying & fitting fixing A.C. Sheet in roof drilling hole in wind ties including fixing of ridges valleys,windties etc. excluding cost of fittings. etc. complete as per the direction of the Engineer-in-charge |
| 3 | Providing Single under-reamed Piles foundation of 250 mm dia. 2.50m long with R.C.C M-20 using 12 mm size black hard granite (Crusher Broken) stone chips including cost of boring , but excluding cost of M.S rods /Tor steels and labour charges for cutting bending and binding of steel and T&P required for the work etc. complete as directed by the Engineer-in-Charge. |
| 4 | R.C.C. work M-20 grade with 20mm and down grade C.B chips having a minimum compressive strength (in work test) 200 kg/cm2 in 15cm cubes at 20 days after mixing and test conduct in accordance with I..S 456 and I.S 516 including hoisting lowring laying concrete and compacting with vibrators, curing for 28 days with smooth centering and shuttering and finishing the exposed surface smooth providing grooves or beads where necessary including cost, conveyance, royalties & T&P required for the work complete in all respect but excluding cost of HYSD and binding wires and labour charges for bending binding and tying the grills as per drawing, specification and direction of Engineer-in-Charge. ( G Beam) |
| 5 | Lintel |
| 6 | Supplying HYSD (FE 415)/ (FE 500) of Govt. approved for reinforcement tying the grills and placing in position as required for the RCC works and lowering,laying including cost,conveyance & taxes of HYSD bars and binding wires of 18 to 20 gauge required for the work and bending binding and tying the grills ( Payment will be made on weight of HYSD bars only and no separate payment will be made towords the weight of binding wires) etc. complete as per specification and direction of the Engineer - in - charge |
| 7 | Fly Ash brick masonry in cement mortar (1:6) in foundation and plinth using Fly Ash brick size 25cm x 12cm x 8cm and 75 kg/cm2 with dimensional tolerance 8% after immersing the bricks for six hours in water before use including splays cutting circular moulding corbelling chamfering and similar such type of work as directed by the Engineer-in-charge including watering and curing cost, conveyance, royalties and taxes of all materials and cost of all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge. |
| 8 | Fly Ash brick masonry in cement mortar (1:6) in Superstructure using Fly Ash brick size 25cm x 12cm x 8cm and 75 kg/cm2 with dimensional tolerance 8% after immersing the bricks for six hours in water before use including splays cutting circular moulding corbelling chamfering and similar such type of work as directed by the Engineer-in-charge including watering and curing cost, conveyance, royalties and taxes of all materials and cost of all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge. |
| 9 | Cement concrete (1:2:4) using 12 mm(½\\") size hard crusher broken granite chips of approved quality from approved quarry including lowering lying concrete watering and curing etc. complete to required levels laid in layers including cost,conveyance,royalities and taxes of all materials and cost of all labour ,T&P required for the work etc. complete as directed by the Engineer-in-charge. |
| 10 | 16 mm (5/8\\") thick cement plaster in Cement Mortar (1:6) finished smooth to inside rough surface of brick walls after raking out joints scrapping and cleaning the surface including watering and curing for specified period etc. complete with cost, conveyance , royality and taxes of all materials , and cost of all labour T&P directed for the work etc. complete as directed by the Engineer - in - charge |
| 11 | Providing and fixing 1.8 m high GI barbed wire fencing with 2.4m RCC M15 grade 150mm x 150 mm concrete post placed every 3 m centre-to- centre founded in 15 grade cement concrete 0.6m below ground level every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horizontal wire, fixed with GI staples turn buckles etc complete as per direction of the Engineer-in-Charge |
| 12 | Concertino coil round |
| 13 | Supplying fitting and fixing steel M.S Angle from roof frame of size 50mm.x50mm.x6mm and 40mm x 40 mm x 6mm & 30mm x 30xm x 5mm corners of the frame post rafter and purline duly matered and electrically welded with one coat of anticoressive Red-Oxide Zine Crome Primer with taxes of all materials and labour etc. complete as per direction of the Engineer - in Charge |
| 14 | Suppling fitting & Fixing in Tata Blue schope sheet drilling holes in wind ties including fixing of ridges valleys wind ties etc including the cost of fittings cost of Tata Blue schope sheet with all fitting & drilling holes in wind ties including cost of sheets and fittings with all labour T&P and taxes etc complete as directed by the Engineer-in-Charge |
| 15 | Supplying, fitting and fixing vitrified coloured and printed tile of size 600mm x 600mm of approved make in floors,treads or steps and landing on 25mm thick bed of cement mortar 1:4 (1 cement : 4 sand) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including cost of all materials , taxes,labour,T&P etc required for the work as directed by the Engineer-in charge |
| 16 | Supplying ,Fitting and Fixing up window (sliding type) made up aluminum section 151-154,151-155, as windows frame section No 151-155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including lucking arrangement including all fitting including cost of materials all taxes , labour , T&P etc complete as per the direction of Engineer-in charge. |
| 17 | Providing fitting and fixing mosquito net windows including cutting to size with cost of net nail beads etc and taxes of all materials and all labour and T&P etc. complete as per direction of the Engineer-in-charge |
| 18 | Providing fitting and fixing of false ceilling with Aluminum anodised T section No 3215 with 2'-0\\" center to centre, L section No 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2'-0\\" x 2'-0\\" using 12.5 mm thick gypsum board of size 6'x4'suspended from ceilling etc complete as directed by the Engineer-in-charge |
| 19 | Providing and applying wall painting two coats with plastic emulsion paint over a coat of primer of approved shade on new surface to give an even shade including cost of plastic emulsion paint, labour, T&P required for the work etc. all complete as directed by the Engineer-in-charge. |
| 20 | Providing Weather coat painting two coats ovar a coat of primer to out side wall with any approved shade of including cost conveyance, taxes of all materials and T & P required for the work including cost of paint etc all complete as directed by the Engineer-in-charge. |
| 21 | Painting two coats any approved shade to wood or Iron works over a coat of priming including sand papering polishing the surface cost, conveyance, taxes of all materials & T&P required for the work including cost of paints etc complete as per the direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
