|
| 1 | Cost of 13 mtr long 150X150 GI Joist Pole for SP cot point |
| 2 | Cost of 11 mtr long 150X150 GI Joist Pole for 11 KV Line & DTR DP |
| 3 | Cost of 15 mtr long H-Pole Pole for heightening of existing 33KV Line |
| 4 | Cost of 9 mtr long 150X150 GI Joist Pole for LT Line |
| 5 | Cost of 250 KVA, 11 /0.4KV, Distribution Transformer, BIS Level-II, Star-II |
| 6 | 11 KV line on 11 mtr long 150X150 GI Joist pole with 100mm2 AAAC with Pin point arrangement and 2 Nos single pole cut point with double disc arrangement per KM (except cost of Pole)- 50 m span |
| 7 | 11 KV AAAC tapping arrangement (Except cost of Pole) |
| 8 | Accessories for 11/0.4kV DP mounted 250 kVA S/S on 11 mtr long 150X150 GI Joist Pole with polymer disc arrangement and 5 Nos Earthing alongwith LT Distribution box with MCCB arrangement(except cost of pole) |
| 9 | Acessories for 11kv SP Cut-Point with 11 mtr 150X150 GI Joist(except cost of pole) |
| 10 | Acessories for 11kv DP Cut-Point with 13 mtr 150X150 GI Joist(except cost of pole) |
| 11 | Accessories for 11kv Stud arrangement with 10 mtr 150X150 GI Joist pole(except cost of pole) |
| 12 | LT AB Cable using 95 Sqmm 5 Wire on 9 mtr long 150X150 GI Joist Pole (except cost of Pole) |
| 13 | 4 Core armoured PVC Cable of 25 mm² Size |
| 14 | Concrete materials for stay anchor plate |
| 15 | Padding and concreting materials for support |
| 16 | Cost of fencing |
| 17 | Plinth for transformer |
| 18 | S/F of 1.5T 5Star Inverter type split AC Machine, Make-Carrier /Blue Star /Hitachi |
| 19 | S/F of 4 KVA Voltage Stabilizer(90-300V) for 1.5 Ton AC, Make-Microtech/V-Guard |
| 20 | Supply and installation of 6 mtr long hot dip galvanized Octagonal pole having base dia of 155 mm and top dia of 70 mm and plate thick ness of 4 mm or more complete with base plate 250x250x16mm and 4 nos. Jtype En 8 grade foundation bolts M24X750mm to withstand 180 KM / HR wind speed considering the weight & dimension of One no. Solar lights fixed on the top of the bracket . The Pole must be suiable to withstand 180 KM/Hr wind speed by considering the weight and wind expose area of one no Semi Integrated Solar lights at a height of 6 mtr above ground .Both the Octagonal Pole and EN8 grade fdn bolts must be manufactuered by Octagonal pole manufacturing company. Brackets & EN8 fdn bolts manufactured in third party Supplier/manufacturer shall not be acceptable.The necessary test reports of Octagonal Pole and EN8 grade fdn bolts must be submitted by the manufacturer for acceptance of product/TDS approval prior to start of the work.The pole manufacturer must submit the confirmation regarding 10 years or more design life of the pole. Construction of RCC foundation by using M20 grade RCC and Fe 415 grade reinforcement in the foundation by considering the SBC as 10 T per sq mtr and fixing the 4 nos. fdn bolts in that foundation for installation of pole with Solar light on that foundation. The work shall be excuted as per the direction of EIC Installation of 6 mtr pole and fixing the solar light on the top of the bracket so that all the solar lights shall be installed at a height of 6mtr above ground on that foundation by using suitable machinery by taking all safety precautions as per the direction of EIC. Make : - Utkarsh/RR Ispat/Vakrangee) |
| 21 | Supply of 30 W Semi Integrated type Solar street lights having 80 Wp or more highly efficient Monocrystalline PV module & 12.8 V 30 Ah or more ) Lithium Ferrophosphate (LiFePo4) Battery having BIS ) which shall be inside the die cast alluminium housing luminaire housing (Theft retardant type), MPPT charge controller having > 92% efficiency & PIR Sensor. The initial lumen output of AIO street light shall be >4800 lumen or more in CCT 6000K (+/-500K) , Lumen efficacy > 160 lm/w as per LM 79 report of NABL Lab. The LED chip will be of OSRAM/NISCHIA/CREE/SEOUL Semiconductor only and should be with lenses for effective lighting distribution. The complete system & BMS should be designed to provide 2 days (24Hrs) back up in dimming mode by activating PIR sensor and battery should be kept inside the luminaire and Mono Crystalline Panel (Made in India ) , Multi purpose SA bracket to mounted on the ARM in south direction. The luminaire must be having I die cast alluminium housing street light with IP 66 protection for critical component like (LED compartment, Driver compartment & Battery) & IK 08 . The solar street lighting company has to supply Solar Panel , Solar light , battery , PIR sensor , Multipurpose SA bracket & other accessories with provision to fix the solar panel towards south direction for faster charging of battery. The Solar street light and the multipurpose Arm shall be fixed in Pole. The solar street lighting company has to offer Warranty on complete lighting system for a period of 5 years. The solar lighting company must submit the warranty certificate in the department by mentioning 5 years warranty on complete lighting system I.e, Light, Charge controller, Battery, Solar Panel, Module Mounting structure, Multipurpose Single Arm bracket etc against manufacturing defects .The Necessary after sales service to against manufacturing defects to be provided Solar lighting company through their Toll free base service service set up within 100 to 150 KM from the project site. 1. LM 79 REPORT NABL lab ) , 2. IK 08 (Report of NABL lab ), 3. IP 66 Report of NABL lab (The necessary test reports of NABL lab against the above must be submitted for any wattage of Solar Street lights for acceptance of product/TDS approval prior to start of the work. All the test reports must be in the name of Solar Lighting Company (Make:Crompton/Havells/Panasonic/Philips/Wipro) Please Enable Macros to View BoQ information |
