|
| 1 | Appendix 1 Shutter |
| 2 | OD35405/2025-2026:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with high build surface tolerant coating having low VOC primer with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site |
| 3 | Appendix 2 Hoisting Mechanism |
| 4 | OD14839/2024-2025:Applying grease to the hoist chain of 4 nos spillway shutters including cost of all materials, labour,machinery etc complete. |
| 5 | OD18716/2024-2025:Supply and Applying bearing Grease on Plummer blocks of hoisting mechanism and shutter Roller wheels using pneumatic grease gun of spillway shutter after cleaning the bearings properly by using Diesel and cotton waste. |
| 6 | OD36070/2025-2026:Applying Cardium Compound of 3mm thickness on radius, for Dia 18mm Wire Rope including cost of all materials, labour etc. complete. |
| 7 | OD15390/2024-2025:Overhauling the chain sprocket,gear box assembly, plummer blocks,drive unit assembly and correcting its miss alignment also check all the electrical connnections etc. including cost of all material, labour, hire charges, conveyance etc. complet |
| 8 | 85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site |
| 9 | OD18900/2024-2025:Trial run the shutter including cost of all labour ,materials etc complete |
| 10 | Providing Dial gauge assembly and Patch work on hoist |
| 11 | OD29996/2024-2025:Providing Dial gauge assembly with with Dial, 1 5/8 feet worm reducer, chain &Sprockets, Frame and other accessories. |
| 12 | 85.103:Supply of MS checquered plates including cost of conveyance charges |
| 13 | 85.124:Fabrication and supply of Hoisting bride unit in structural steel confirming to IS2062 Gr including ladder, covers for hoisting unit etc as per approved specifications, drawings and directions of departmental officer at site including cost of labour, machinery, incidental and handling charges for fixing handrails and allied works etc complete but excluding material already supplied and weight of pipes for hand rails etc |
| 14 | 85.136:Erection of the hoisting bridge unit including handrails , ladder and platform etc. in correct alignment and anchoring it ; setting and aligning the covers of the hoisting unit etc complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied Please Enable Macros to View BoQ information |
