Name of Work:- Construction of open GYM at Subhash Nagar Dharpara near by old Halkaoffice under ward No 42
Sl. No.
Item Description
1
Earth work in excavation by mechanical means (Hydraulic excavation)/manual means in foundation frenches or drains not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead of 50 m All kind of soi
2
Supplying and filling in plinth under floor foundation etc with snd fine from local quarry with all lift includingspreading in horizontal layer watering gradng to required slop ramming consolidating and compacting each layer by usingplate compactor or by any suitable method complete.
3
Providing and laying dry flat brick flooring in required pattern completed.
4
Providing and laying in position cement concrete of specified grde excluding the cost of centering and shuttering All work upto plinth level 1:3:6( 1cement:3 fine sand:6 geded well burnt brick aggregate 20 mm niminal size)
5
First class brick work foundation and pinth including cost of all materials as required complete In cement mortr 1:4(1cement:4 fine sand)
6
Half brick masonary work with first class brick work foundation and pinth including cost of all materials as required complete In cement mortr 1:4(1cement:4 fine sand)
7
Supply & Installation of pre-painted Galvalume Sheets for roofing/cladding (size,Shape and pitch of corrugation as approved by Engineer-in charge) in 550 MPA steel grade made out of cold rolled steel coted with Zinc-Aluminium alloy coating of 43% Zn 55% Al and 1.5 % silicon confirming to ASTM A792/A79m and AS 1397 Alloy coating AZ150/AZ70 colour coated with high quality polyster coating top coated of modified polyeste of 20 micron back side coat of 5 micron having epoxy pamer coat of 5 micron on both side sheet should have protective guard film of 25 micron minimum to avoid scratches whiletransportion and should be supplied in single length upto 12 meter or as desired by Engineer-in-charge the sheet shall be fixed using self drilling /self tapping screws of size(5.5 x55 mm) with EPDM washers filled with white lead complete upto any pitch in horizontal/vertical or curved surfaces excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required 0.50 mm thickness.
8
Providing and laying in position cement concrete of specified grade excluding the cost of centering shuttering grade excluding the cost of centering and shuttering All work plinth level 1:2:4(1cement:2fine snd:4 gradd stone aggregate 20 mm nominal size)
9
Steel work in built up tubular (round,square or rectangular hollow tubes etc.) trusses etc including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with specal washer etc complete
10
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement All work upto plinth level 1:1.5:3(1cement:1.5 fine sand:3 grded stone aggregate 20 mm nominal size)
11
Centering shuttering in/cl strutting propping etc and removal of from work for foundation footings base for columns etc for massconcrete with timber plank.
12
Reinforcement for RCC work including straightening cuting bending placing in position and binding complete upto plinth level thermo-Mechanically Treated bars grade Fe 500D or more
13
12 mm cement plaster of mix In cement mortar 1:4(1cement:4 fine sand) including Neat cement punning
14
Providing and fixing chequered terrazo tiles 22 thick graded marble chips of size upto 6 mm laid on floors footpath & courtyard on 20 mm thick bed of cement mortar 1:4 (1cement:4 fine sand) jointed with near cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing eyc all complete as per direction of Engineer in Charge.Light shade pigment using white cement.
15
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade ( Payment shall be made after submission of test certificate issued by Two or more coats on new work. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
