|
| 1 | PAINTING of REGULATOR SHUTTERS and HOISTING BRIDGE , SUPPLY and FABRICATION of LADDER on SHUTTER and REPLACING of DAMAGED RUBBER SEALS |
| 2 | OD42978/2025-2026:Providing with Temporary Platform (Suspended type) of size 6m X 2.5m, with scaffolding pipe suspension from overhead structure, for the repair works/painting of shutters, hoisting bridges, etc. including the cost of bracing, fittings, handling charges, assembling, dismantling and all safety arrangements complete. |
| 3 | 85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site |
| 4 | 85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site |
| 5 | OD42976/2025-2026:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges(#) |
| 6 | OD42971/2025-2026:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges.(#) |
| 7 | OD48315/2025-2026:Supply of MS round bar including cost of conveyance charges. (#) |
| 8 | OD42972/2025-2026:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge /Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl fficer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied |
| 9 | OD42979/2025-2026:Chipping , cutting and removing the bolt and nuts, dismantling, taking out and stacking the old rubber seals from the gates without damaging the gate components including cost of all labour, tools and accessories conveyance charges etc. complete. |
| 10 | 85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing |
| 11 | 85.118:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings |
| 12 | OD51178/2025-2026:Erection of the canal shutter ( up to 2 tonne weight) /hoisting bridge / platform including handrails , ladder etc. for the same including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied-(CANAL GATE 3-16) |
| 13 | OD51182/2025-2026:Supplying and refilling Grade 320 gear oil for worm reducer of rope drum operated vertical shutters . |
| 14 | OD51184/2025-2026:APPLYING CARDIUM COMPOUND on WIRE ROPE in sufficient thickness. including cost of all materials, labour etc complete. (#) |
| 15 | OD51190/2025-2026:CHECKING ELECTROMAGNETIC BRAKE assembly and connection, Cleaning the drum and brake pad and adjusting the brake |
| 16 | OD51183/2025-2026:Supplying and applying bearing Grease on plummer blocks of hoisting mechanism manually and on shutter roller wheels using pneumatic grease gun of rope drum operated vertical shutters after cleaning the bearings properly by using diesel and cotton waste. |
| 17 | OD51191/2025-2026:SUPPLYING and APPLYING HEAVY DUTY SEMI-FLUID ADHESIVE type GREASE on gears ,Manual operating mechanism chain of rope drum operated vertical shutters after cleaning the surfaces properly by using wire brush and Diesel. |
| 18 | OD51189/2025-2026:Conducting Trial run of shutters Please Enable Macros to View BoQ information |
