|
| 1 | Earthwork open excavation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and depositing the excavated earth within the compound in places shown by departmental officers with an initial lead of 10m and lift of 2m and clearing and leveling etc. complete complying with standard specification. |
| 2 | FOOTING |
| 3 | GRADE BEAM |
| 4 | DRAIN WORKS |
| 5 | Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification |
| 6 | Supplying and filling in foundation and basement with well gravel layer not more than 15cm thick well ramped watered and compacted etc,. Complete with standard specification |
| 7 | Plain Cement Concrete 1:4:8 (One part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 8 | Centering for sides and soffits for plain surface such as slabs ,lintels ,sunshades, staircase waist slabs etc., including strutting 3m high using M.S sheet of size 90cm X 90 cm and 10 Gauge fitted with M.S Angle of size 25x25x3mm laid over silver work (C.Wood) joists of size 10x6.50cm spaced at about 90 c/c and supported by casurina props . 10 to 13 cm dia spaced at about 75 c/c complying with standard specification. |
| 9 | Column |
| 10 | Grade Beam |
| 11 | Beams and Slabs |
| 12 | Drain works |
| 13 | M-20 CONCRETE - Providing and laying in position, standarised design mix M-20 Grade using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325Kg/m3 and maximum water cement ratio of 0.55, including admixture(plasticiser/super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.70 cu.m.)940.50Kg of 20mm machine crushed stone jelly and with about (2.80 cu.m.)462.00Kg of 10-12mm machine crushed jelly and with about (4.25 cu.m.)701.25Kg of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor/roof slabs wherever neccessary without clambing extra, etc. complete complying with standard specification and as directed by the departmental officers. the coarse and fine aggregates to be used should comply with the requierments of IS 383-2016. (No separate payment will be made by the department for the exces usage of materials as per design mix.) |
| 14 | Foundation and basement |
| 15 | Ground Floor |
| 16 | Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. |
| 17 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 18 | Fabricating supplying and fixing of UPVC colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be UPVC Base and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets.The finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. |
| 19 | Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification |
| 20 | Brickwork using Country Bricks of size 8-3/4\\" x 4-1/4\\" x 2-3/4\\"\\" in Cement Mortar 1:5 (One Cement and Five crushed stone sand) including curing, neat finishing, etc., complete complying with standard specifiction. |
| 21 | Upto Basement |
| 22 | Ground Floor |
| 23 | Brick Partition Walls using III class country bricks of size 8 3/4\\"X4 1/4\\" X 2 3/4\\" in C.M 1:3 using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specification - 10 sqm (Ground Floor) |
| 24 | Fabrication ,Supply and Fixing of Weld Mesh Screen using 'L' Angle alround of size 40x40xx5mm vertically and horizontally welded with 'L' Angle Frame and fully covered with Weld mesh of size 7.5x2.5mm including cost and conveyance of all material and labour charges as per standard specifications. |
| 25 | Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 26 | Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600 x 600 x 8mm thick of approved make, quality and Colour in all floors over a base layer of cement mortar 1:3 (One Cement and Three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work |
| 27 | Dadooing walls with Glazed tiles of sizes 305mm x 200mm x 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed. |
| 28 | Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification |
| 29 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors |
| 30 | Supply and Run of 3 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed position SD 352 PWD Elec.Data 25-26 |
| 31 | Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 900V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed Light point/Fan point (For Electronic regulator) etc, complete as per standard specifications. SD18 |
| 32 | Wiring with 2 x 1.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mmx100mmx113mm TW switch box in flush with wall with 3mm thick hylem sheet cover for 5A 3pin non interlocking wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC plug point SD 36 PWD Elec.Data 25-26 |
| 33 | Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting et.,complete SD 88 PWD Elec.Data 25-26 |
| 34 | Supply and fixing of 1200 mm (48\\") AC Ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp. SD 495 PWD Elec.Data 25-26 |
| 35 | Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb including cost of all material charges and labour charges etc, complete as per standard specifications SD 85 PWD Elec.Data 25-26 |
| 36 | Supply and fixing of 4'40W twin street light fluorescent fitting complete with copper choke and condensor with 32 mm dia GI pipe (Class'B') with1No.32mm GI bend complete on the existing post wall with 16A aerial fuse unit on MS plate with PVC unsheathed FRLS copper leads MS clamps and aluminium painting with fluorescent tubes SD 95 PWD Elec.Data 25-26 |
| 37 | Supplying and fixing in position best quality 110mm P.V.C soil/ waste pipes (6KSC) having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications. WD-M0013 TWAD SoR 25-26 |
| 38 | Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. (S.No.82 Vellore Data 25-26) |
| 39 | 25mm dia |
| 40 | Supplying PVC Specials (with working pressure 10 kg. / Sq.cm) in water supply arrangements (both in internal and external water supply arrangements |
| 41 | Coupler |
| 42 | 25 mm Dia (M-0882 - PWD SoR 25-26) |
| 43 | Elbow |
| 44 | 25 mm Dia (M-0888 - PWD SoR 25-26) |
| 45 | 25 mm Dia (M-0894 - PWD SoR 25-26) |
| 46 | 25 mm Dia (M-0900 - PWD SoR 25-26) |
| 47 | End Cap |
| 48 | 25 mm Dia (M-0906 - PWD SoR 25-26) |
| 49 | Reducer |
| 50 | 20 mm x 15 mm (M-0910 - PWD SoR 25-26) |
| 51 | 25 mm x 20 mm (M-0911 - PWD SoR 25-26) |
| 52 | Reducer Tee |
| 53 | 20 mm x 15 mm (M-0915 - PWD SoR 25-26) |
| 54 | 25 mm x 20 mm (M-0916 - PWD SoR 25-26) |
| 55 | Reducer Elbow |
| 56 | 20 mm x 15 mm (M-0920 - PWD SoR 25-26) |
| 57 | 25 mm x 20 mm (M-0921 - PWD SoR 25-26) |
| 58 | PVC Screw Down Tap Heavy Type |
| 59 | 20 mm Dia (M-0510 - PWD SoR 25-26) |
| 60 | Supplying and fixing in position first quality and approved variety of 25mm dia Gun Metal Gate Valve (Heavy type ) with I.S.I. mark of the following sizes including cost of Shellac , thread etc, .including labour for cutting and threading of G.I.Pipes etc. ,complete complying with standard specifications for both internal and external water Supply arrangements. M 0618 TWAD SoR 25-26 |
| 61 | Supplying laying and jointing 25mm dia G.I. Pipes of approved quality and best varity of B Class pipe of the following sizes including fixing G.I specials but excluding cost of such specials cutting threading of pipes and fixing to wall with necessary teak wood plugs, clamps and screws masking holes on the wall or drilling holes in roof and making good the dismandled portions to original conditions with necessary brick work and concrete and plastering where ever necessary with necessary scafolding charges. The pipes are to be painted with two coats of good variety and best approved quality of synthetic enamel paint over a priming coat of red-oxide primer etc., complete. |
| 62 | Supply and Delivery of 4MP Fixed lense Bullet Camera with 80m Built-in IR LED, it can provide clear color video in low light With advanced Wide Dynamic Range (WDR) and IP67 rated SD card option including all labour and material charges etc.,complete |
| 63 | Supply and Delivery of NVR Type of Recording Device, 32 Number of IP based Video input Channels, 2 Number of Hard Disks capacity, 6TB Storage Capacity of each Hard Disk including all labour and material charges etc.,complete |
| 64 | Supply and Fixing of 4TB 3.5\\" surveillance HDD with 64MB Cache including all labour and material charges etc.,complete |
| 65 | Supply and Delivery of 42 inch Large format commercial display, LED Backlit Technology, Portrait and Landscape Orientation, 1920 x 1080 (Full HD) Native Resolution (Pixels), 16:9 Aspect Ratio, 400 Brightness (Nits) including all labour and material charges etc.,complete |
| 66 | Supply and Delivery of 8 Port Gigabit PoE Switch with 2 Gigabit uplink including all labour and material charges etc.,complete |
| 67 | Supply and Delivery of 1KVA line intractive UPS including all labour and material charges etc.,complete |
| 68 | Supply and Delivery of Camera metal box with steal tag including all labour and material charges etc.,complete |
| 69 | Supply and Delivery of Wireless mouse including all labour and material charges etc.,complete |
| 70 | Supply and Delivery of HDMI cable 15m including all labour and material charges etc.,complete |
| 71 | Supply and Delivery of CAT6 cable 23-AWG including all labour and material charges etc.,complete |
| 72 | Supply and Delivery of 6 U rack with Power manager including all labour and material charges etc.,complete |
| 73 | Installation charges for Camera and accessories including all labour and material charges etc.,complete |
| 74 | GST 18% Please Enable Macros to View BoQ information |