|
| 1 | Supply of Hot dip Galvanized Swaged type Steel Tubular pole of 7.0 mtr long with inbuilt junction box including cut-out, terminal etc. for cable termination, base plate, pole cap & 1.5 mtr long swan neck as per specification IS : 410 SP 3 at work site of make BPP/Utkarsh Tubes and Pipes Ltd./Skipper Steel Ltd./Subham Pole. (Analysis rate) |
| 2 | Erection of Single Steel tubular pole of length as given belowwith/without sole plate & Cap etc. in CC foundation (Proportionand dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finishand GI earth bolt after making drilled holes etc. on pole & carriageof pole upto 1.6 Km from Store to work-site including filling upthe excavated earth pit with shifted soil and ramming properly. upto 9.0 mtr Size .06x.06x1.70 PWD Schedule,2017 Page- H-1, Item 1 (b) + 3% District Charge. |
| 3 | Supply and drawing of PVC / XLPE Aluminium armoured cable 1.1 KV grade at work site of make Havells / Polycab / KEI. Size 16 sq.mm x 4 core. (Analysis rate) |
| 4 | Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. PWD Schedule,2017 Page- F-2, Item 1 (a) + 3% District Charge. |
| 5 | Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core. PWD Schedule,2017 Page- F-1, Item 3 (a) + 3% District Charge. |
| 6 | Earthing Complete with Driving of Earth Spike & Connection of Earth Electrode With Non Current Carring Metalic Parts of Supports,Stay Wires ,Craddl Guards.I.A ETC. (WBSEDCL Schedule,2018 Page- F-1 of 7, Item 16) |
| 7 | Connecting the equipments to earth busbar including S & F GI(Hot Dip) wire of size as below on wall/floor with staples buriedinside wall/floor as required and making connection toequipments with bolts, nuts, washers, cable lugs etc. asrequired and mending good damages Solid GI wire No. 6 SWG PWD Schedule,2017 Page- G-2, Item 5 (a,ii) + 3% District Charge. |
| 8 | Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required. PWD Schedule,2017 Page- F-6, Item 11 (d) + 3% District Charge. |
| 9 | Supply & drawing of 1.5 sq.mm PVC single core multistrand copper wire from pole box to fittings through the pole & connection, testing complete of make Havells / Finolex / KEI. (Analysis rate) |
| 10 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. 4 core 16 Sqmm. PWD Schedule,2017 Page- F-5, Item 8 (b,xii) + 3% District Charge. |
| 11 | Supply, installation, commissioning & testing of outdoor type feeder pillar box made of 2 mm CRCA sheet duly rust inhibited and stove enamel painting, complete with rubber gasket, hinged door at least 800 x 450 x 200 mm in size projected top cover, suitable ventilation and MS iron frame work with adequate space for provision of WBSEDCL meter. The panel consisting with 63 A TPN incoming, Astronomical time switch, toggle switch, contractor of L&T make for automatic operation of street light system. (Analysis rate) |
| 12 | (a) Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts.long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm diax 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled withbitumen partly under the ground level and partly above groundlevel driven to an average depth of 3.65 Mts. below the groundlevel as below By ISI-Medium GI pipe . PWD Schedule,2017 Page- G-1, Item 2 (a)+ 3% District Charge. |
| 13 | ( b) Extra for treatment of soil by using salt & charcoal or coke for plate electrode. PWD Schedule,2017 Page- G-2, Item 3 (b)+ 3% District Charge. |
| 14 | Supply, fixing, connection & testing of outdoor type Street light fittings of IP66, IK05 LED Integral type streetlight luminaire with system lumen > 11500 Max system wattage 90 W with pressure die cast aluminium housing, Luminaire should be operable with auto adjustable 140V-270V supply voltage with same driver and with 3 KVA Surge protection, LM 80 For LED Source & LM79 for Luminaire is mandatory, Confirming the lighting level as per B1 category road of IS 1944 with spacing [Make: Philips (Cat no. BRP 502 LED117 CW R5C PSU S1 V1 SPD)/Approved equivalent from Crompton/Wipro/Bajaj make] |
| 15 | Supplying fitting and fixing plaque made of Granite slabs ( single piece) of 15 mm to 18 mm thick with uniform texture and without decorative veins in facia etc fixing with using Cement slurry at back side of granite @4.4 kg/sq.m and white cement slurry for joint filling @1.8 kg/sq.m.including making lettering , sign marks etc as per direction in the granite slabs with fixed at brick wall (in 1:6) as directed including earth cutting , 75 mm thick sand filling , 75 mm thick Cement concrete (1:2:4) and plastering with 20 mm thick sand cement mortar (6:1) as specifed by the Department including wall putty , Acrylic primer & Super Protective 100% Acrylic Emulsion two coats including all incedential charges for labours, materials, machinaries & transportig charges complete in all respect as per direction of EIC.(Analysis rate) |
| 16 | Sub Total |
| 17 | Add GST @ 18% on Sub-Total Cost, i.e. |
| 18 | Add Labour Welfare Cess @ 1% on Total cost after GST, i.e. Please Enable Macros to View BoQ information |
