|
| 1 | Taking down of steel tubing and connections complete on walls/ floors etc for 15mm bore of pipe complete all as specified and directed by Engineer-in-Charge. |
| 2 | All as per item No.1 above but bore of pipe in 20mm dia complete all as specified and directed by Engineer-in-Charge. |
| 3 | All as per item No.1 above but bore of pipe in 25mm dia complete all as specified and directed by Engineer-in-Charge. |
| 4 | S&F Galvanised iron medium graded with ISI marked tubes with all fittings and fixed complete on walls ceiling or laid in floors etc,15mm in dia complete all as specified and directed by Engineer-in-Charge. |
| 5 | All as per item No.4 above but bore of pipe 20 mm complete all as specified and directed by Engineer-in-Charge. |
| 6 | All as per item No.4 above but bore of pipe 25 mm complete all as specified and directed by Engineer-in-Charge. |
| 7 | Refixing of old steel tubing and connections in new or old positions (walls/ceiling/floors etc) bore of pipe 15mm complete all as specified and directed by Engineer-in-Charge. |
| 8 | All as per item No.07 above but bore of pipe 20mm complete all as specified and directed by Engineer-in-Charge. |
| 9 | All as per item No.07 above but bore of pipe 25mm complete all as specified and directed by Engineer-in-Charge. |
| 10 | Taking down of 3-Layer PP-R (Polypropylener random copolymer) 16 mm (outer dia) and connections complete on walls floors etc complete all as specified and directed by Engineer-in-Charge. |
| 11 | Taking down of 3-Layer PP-R (Polypropylener random copolymer) 20mm outer dia pipe and connections complete on walls floors etc complete all as specified and directed by Engineer-in-Charge. |
| 12 | Taking down of 3-Layer PP-R (Polypropylener random copolymer) 25mm outer dia pipe and connections complete on walls/floors etc complete all as specified and directed by Engineer-in-Charge. |
| 13 | S&F 3-Layer PP-R (Polypropylener random copolymer) 16 mm (outer dia) concealed pipes SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and directed by Engineer-in-Charge. |
| 14 | All as per item No 13 above but 20mm outer dia pipe complete all as specified and directed by Engineer-in-Charge. |
| 15 | All as per item No 13 above but 25mm outer dia pipe complete all as specified and directed by Engineer-in-Charge. |
| 16 | Supplying and laying in repair of 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in walls/trenches/ceilings complete all as specified and directed by Engineer-in-Charge. |
| 17 | Supplying and laying in repair of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in walls/trenches/ceilings complete all as specified and directed by Engineer-in-Charge. |
| 18 | Supplying and laying in repair of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in walls/trenches/ceilings complete all as specified. all specified and as directed. |
| 19 | S&F in repairs 20mm dia Gun metal gate valve with iron wheel head screwed both ends for iron pipes of for unions complete all as specified and directed by Engineer-in-Charge. |
| 20 | All as per item No 19 above but 25mm dia complete all as specified and directed by Engineer-in-Charge. |
| 21 | S&F in repairs 15 mm bore CP Bib tap cast copper alloy fancy type crutch or butterfly handles screwed down for iron or for brass ferrule complete all as specified and directed by Engineer-in-Charge. |
| 22 | S&F in repairs 15 mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed by Engineer-in-Charge. |
| 23 | S&F in repairs 15mm dia chromium plated fancy type angle/stop cock cast copper alloy screwed down high pressure fancy screwed both ends for pipe or for union complete all as specified and directed by Engineer-in-Charge. |
| 24 | S&F in repairs 15 mm dia Bib tap standard PTMT any colour screwed for iron pipe (Min weight 90 gms) complete all as specified and directed by Engineer-in-Charge. |
| 25 | S&F in repairs 15mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed(Minimum weight 15mm-110gms) complete all as specified and directed by Engineer-in-Charge. |
| 26 | S&F in repairs 15mm dia Angle/Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed(Minimum weight 15mm-90gms/ 20mm- 92gms) complete all as specified and directed by Engineer-in-Charge. |
| 27 | S&F in repairs PVC over head tank cover for PVC water storage tank of any capacity complete all as specified and directed by Engineer-in-Charge. |
| 28 | S&F in repairs Waste coupling of PTMT (half or full threaded) 32mm bore (Min wt 45gms) complete all as specified and directed by Engineer-in-Charge. |
| 29 | All as per item No 28 above but 40 mm dia complete all as specified and directed by Engineer-in-Charge. |
| 30 | S&F in repairs PVC connections 15mm dia 600mm long (for cold/hot water connection with brass or PTMT flynuts and washer at both ends complete all as specified and directed by Engineer-in-Charge. |
| 31 | S&F in repair 600x450 bevelled edged looking mirror 6mm thick with Design wooden frame work fitted with 6mm thick commerical ply or AC sheet backing to mirror fixed as in repair complete all as specified and directed by Engineer-in-Charge. |
| 32 | S&F in repair Rotational moulded Triple layer polyethylene water storage tank ISI marked (cylindrical Vertical with closed top) hoisted and fixed in position all as specified 500litre Capacity including float valve and other fittings and fixtures and dismantling old one complete all as specified and directed by Engineer-in-Charge. |
| 33 | All as per item No. 32 above, but 1000 litre capacity complete all as specified and directed by Engineer-in-Charge. |
| 34 | S&F in repairs EWC seat cover White flat bottom solid with CP hinging device, nuts & bolts etc complete all as specified and directed by Engineer-in-Charge. |
| 35 | S&F in repairs PVC valve less syphonic action type flushing cistern 10 litres capacity, high/low level with inlet ball valve, float and handle including brackets complete all as specified and directed by Engineer-in-Charge. |
| 36 | S&F in repairs Ball valves of High pressure of PTMT with epoxy coated with aluminum rod & high density plastic ball 15mm inside flushing cistern( min wt - 142gms) complete all as specified and directed by Engineer-in-Charge. |
| 37 | Taking down rain water pipes 75/110mm, waste/soil pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc including cleaning or refixing or removal to store or handling over to contractor on account of schedule of credit complete all as specified and directed by Engineer-in-Charge. |
| 38 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge. |
| 39 | All as per item No 38 above but 110 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 40 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed complete to walls complete all as specified and directed by Engineer-in-Charge. |
| 41 | S&F 110mm dia PVC (SWR) Pipe single socketed in any length with rubber ring joints fixed complete to walls complete all as specified and directed by Engineer-in-Charge. |
| 42 | S&F for PVC (SWR) bends any radius with access door, 110mm bore complete all as specified and directed by Engineer-in-Charge. |
| 43 | S&F for PVC (SWR) bends any radius, 110mm bore complete all as specified and directed by Engineer-in-Charge. |
| 44 | S&F for PVC (SWR) vent cowl, 75mm bore complete all as specified and directed by Engineer-in-Charge. |
| 45 | S&F for PVC (SWR) bends any radius, 75mm bore complete all as specified and directed by Engineer-in-Charge. |
| 46 | S&F for PVC (SWR) bends any radius with access door, 75mm bore complete all as specified and directed by Engineer-in-Charge. |
| 47 | S&F PVC(SWR) Vent cowl 75mm dia complete all as specified and directed by Engineer-in-Charge. |
| 48 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-Charge. |
| 49 | Cutting chases for concealed water tubing and making good, cutting not exceeding 20cm in girth or width in brick/block masonry and making good as same as existing surfaces complete all as specified and directed by Engineer-in-Charge. |
| 50 | Demolition of brick work built in CM including all quoins arches pillars etc complete all as specified and directed by Engineer-in-Charge. |
| 51 | M&L fly ash Brickwork with fly ash bricks, straight or curved on plan exceeding 6m mean radius, built in CM 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 52 | M&L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in built in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 53 | M&L for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge. |
| 54 | S&F in repairs Internal components part (except PVC body) of PVC Flushing cistern 10 litre capacity including ball valve etc complete (Flush Kit) complete all as specified and directed by Engineer-in-Charge. |
| 55 | Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing) removing the rubbish of the premises complete all as specified and directed by Engineer-in-Charge. |
| 56 | M & L glazed ceramic coloured tiles of size 350x250x7/450x350x7 mm thick on vertical surface as in dados, skirting etc, set and jointed in neat cement slurry over and including 10mm thick plaster in cement mortar 1:4, pointed with white/ coloured cement to match complete all as specified and directed by Engineer-in-Charge. |
| 57 | M&L Non skid ceramic coloured tiles 6-7 mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed plaster in CM 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 58 | Demolition of cement concrete (unreinforced) of any description as in sunken slabs, existing roof treatment any type complete all as specified and directed by Engineer-in-Charge. |
| 59 | M&L for 10 mm thick plastering in CM 1:3 finished even and smooth using extra cement mixed with liquid water proofing admixture as per manufacturer's instructions as in sunken plaster complete all as specified and directed by Engineer-in-Charge. (Note : WPC shall be measured and paid separately) |
| 60 | M&L for applying two coats of PU based liquid polyurethane treatment minimum 1.5mm wet film thickness over a priming coat on horizontal and vertical surfaces, second coat shall be applied in perpendicular direction, if required maybe reinforced with suitable fabric reinforced all as per manufacturer's instructions as in sunken slab surfaces complete all as specified and directed by Engineer-in-Charge.(NOTE : After the application of above treatment, contractor has to do flood test on the prepared sunken slab surface by filling with water plugging the drains with water and check for any leakage, dampness and seepage, In case there is a slightest indication of seepages noticed, the same shall be rectified by injection grouting to seal all cracks or application of polymer modified mortar admixed with the integral WPC or cementitious crystalline water proofing compound in the affected area to seal all cracks and micro cracks if any using extra polymer cement mortar. This shall be done by contractor at his own cost only and rate is deemed to be included in the rate quoted by the contractor. |
| 61 | Supply only Liquid water proofing compound complete all as specified and directed by Engineer-in-Charge. |
| 62 | M&L Plain cement concrete type E2, 1:5:10 (40mm graded aggregate) in foundations, filling and mass concrete including formwork complete all as specified and directed by Engineer-in-Charge. |
| 63 | Taking down old cement plaster of any description any thickness from external surfaces of walls/soffits etc including racking out joint hacking for keys and scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 64 | M&L for rendering 10mm thick in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 65 | M&L for rendering 15mm thick on brick/concrete surfaces with CM 1:4 in two coats (5mm thick setting coat with WP compound/liquid as per manufacturer's instructions over 10mm thick backing coat) finished even and smooth without using extra cement including mixing of liquid waterproofing compound as per manufacturers instructions on brick/concrete/masonry or in chajjas/parapet walls etc surface complete all as specified and directed by Engineer-in-Charge. |
| 66 | M&L for rendering 5mm thick in CM 1:3, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 67 | M&L for preparation of newly plastered surfaces and applying two coats of OBD over a coat of alkali resistance primer on wall complete all as specified and directed by Engineer-in-Charge. |
| 68 | M&L for preparation of newly plastered wall surfaces and applying two coats of cement based paint on wall complete all as specified and directed by Engineer-in-Charge. |
| 69 | M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling/facia complete all as specified and directed by Engineer-in-Charge. |
| 70 | M&L for complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder complete all as specified and directed by Engineer-in-Charge. |
| 71 | Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing /scraping down all loose particle, smoke soot, moulds, moss&efflorescent salts, oil&greasy spots etc with using broom/steel patti/wire brush/sand papering or by any other means including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc of any thickness and to make the surface even and smooth after preparing the surface smooth applying one coat of white wash complete all as specified and directed by Engineer-in-Charge.(i) The prepared surface after wall putty, the contractor will inform to the GE as well as Engineer-in-Charge for site inspection before applying further finishes. Please note that further finishes work will start only after approval of the prepared surface from the GE as well as Engineer In Charge.(ii) Whitewash shall be made by making the lime slaked at the site and shall be mixed and stirred with about 5 litres of water for 1kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to everyone cubic meter of lime cream. About 1.3 kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and directed by Engineer-in-Charge. |
| 72 | Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of ceiling by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean including applying white cement based putty of any thickness where required for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth after preparing the surface smooth applying one coat of white wash complete all as specified and as directed by Engineer-in-Charge.The prepared surface after wall putty, the contractor will inform to the GE as well as Engineer-in-Charge for site inspection before applying further finishes. Please note that further finishes work will start only after approval of the prepared surface from the GE as well as Engineer In Charge. |
| 73 | Material and labour for preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, washing down with water including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make surface even and smooth after preparing the surface smooth applying one coat of cement base paint with highlighter of any approved shade @ 5 Sqm/kg/1 coat over & including a coat of exterior wall cement primer @10 Sqm/kg/1 coat (In case of second coat) as recommended for undercoat by manufacturer of cement base paint by using following brands of cement base paint and primer by brush or roller complete all as specified and as directed by Engineer In Charge.the cost provided upto 4th storey of buildings. (i) The prepared surface after wall putty, the contractor will inform to the GE as well as Engineer-in-Charge for site inspection before applying further finishes. Please note that further finishes work will start only after approval of the prepared surface from the GE as well as Engineer In Charge. |
| 74 | Material and labour for preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth after preparing the surface smooth applying one coat of oil bound distemper (washable) as approved tint/colour complete all as specified and as directed by Engineer-in-Charge.(i) The prepared surface after wall putty, the contractor will inform to the GE as well as Engineer-in-Charge for site inspection before applying further finishes. Please note that further finishes work will start only after approval of the prepared surface from the GE as well as Engineer In Charge. |
| 75 | Material and labour for complete removal of existing treatment (any layers of existing treatment ) from walls/pillars/cornices by scraping down with using steel patti wire/ brush/sand papering or preparing the surfaces and after applying two coats of oil bound distemper (washable) over a coat of alkali resistance primer and wall care putty as per approved tint/colour by roller or roller brush complete all as specified and directed by Engineer-in-Charge.NOTE : - Each stage i.e after complete removal and before applying OBD as specified above, the surface shall be passed in writing by the Enigineer-in-charge. |
| 76 | M&L for preparation of old decorated surfaces of wood work exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 77 | M&L for preparation of old decorated steel surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 78 | Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of ceiling by removing/scraping down all loose particle, smoke soot, moulds, moss&efflorescent salts, oil&greasy spots etc with using broom/steel patti/wire brush/ sand papering or by any other means including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth after preparing the surface smooth applying one coat of OBD with paint brush complete all as specified and directed by Engineer-in-Charge.The prepared surface after wall putty, the contractor will inform to the GE as well as Engineer-in-Charge for site inspection before applying further finishes. Please note that further finishes work will start only after approval of the prepared surface from the GE as well as Engineer In Charge. Please Enable Macros to View BoQ information |
