|
| 1 | M&L and their transportion to each qtr/ barrack at Ponda/ Madgaon/ Bambolim/ Altinho area for removing old faded polish using polish removing agent / scrapper/ caustic soda or by any other means without damaging surfaces. Filling holes & knots with putty,rubbing with sand paper / abrasive cloth to obtain smooth and clean surface free from dust of furniture as listed below. Applying high gloss French Polish till glossy shine finish obtained complete all as shown on drawing and as specified and as directed. Note: The hidden unexposed surfaces shall be made smooth by sand papering and a coat of Pink / Wood Primer shall be applied as preservation coat. |
| 2 | Chair Easy [FD – 17 / FD – 229] |
| 3 | Table Dressing Ladies with Mirror [FD – 251, FD/MAP-II/07] |
| 4 | Table Dressing Gents with Mirror [FD – 230 / FD – 379] |
| 5 | Side Board [FD – 241 / FD – 372] |
| 6 | Bin Linen Multipurpose [FD/E6/MAP/09] |
| 7 | Table writing [FD-249/FD 275] |
| 8 | Sofa Set 4 Seater [FD – 281 / FD – 373] |
| 9 | Sofa Set 5 Seater [FD – 281 / FD – 373] |
| 10 | M&L and labour and their transportion to each qtr/ barrack at Ponda/ Madgaon/ Bambolim/ Altinho area for removing broken particle board / plywood work of top,side&bottom including shelves of the following. S&F new marine plywood BWP grade conforming to IS 303:2024 standard for interior use for top,side&bottom 18mm thick with decorative laminate 1mm thick both sides including 6mm teak wood beading allaround duly fixed with neccessary fittings. Shade and Texture approved by GE and directed by Engr-in-charge. |
| 11 | Side Board [FD – 241 / FD – 372] |
| 12 | Bin Linen Multipurpose [FD/E6/MAP/09] |
| 13 | Table Dressing Ladies [FD – 251 / FD / E6 / MAP / 14] |
| 14 | Table Dressing Gents [FD-230/ FD/ E6 / MAP / 16] |
| 15 | M&L and their transportion to each qtr/ barrack at Ponda/ Madgaon/ Bambolim/ Altinho area for dismantling and taking out carefully old unserviceable / worn-out and broken components of wooden furniture without damaging the remaining other serviceable members and supplying and fixing of the same with new components such as Wood Work / Wooden Members made of Teak Wood [Cat – I] wrought finished to required shape and size complete to its original shape and size all as shown on drawing, as specified and as directed for following articles: |
| 16 | CHAIR EASY [FD – 229] |
| 17 | Front Leg |
| 18 | Rear Leg |
| 19 | Arm Rest |
| 20 | M&L and their transportion to each qtr/ barrack at Ponda/ Madgaon/ Bambolim/ Altinho area for dismantling and taking out carefully old unserviceable / worn-out and broken components of wooden furniture without damaging the remaining other serviceable members and supplying and fixing of the same with new components such as Wood Work / Wooden Members made of Teak Wood [Cat – I] wrought finished to required shape and size and applying two or more coats of French Polish to match with the existing surfaces including preparation of surfaces and complete to its original shape and size all as shown on drawing, as specified and as directed for following articles: |
| 21 | TABLE DRESSING LADIES [FD – 251 / FD / E6 / MAP / 14] |
| 22 | Mirror size 366 X 1220mm with wooden frame |
| 23 | Drawers |
| 24 | PVC Leg heavy duty |
| 25 | TABLE DRESSING GENTS [FD – 230 / FD – 379] |
| 26 | Mirror size 380x760mm with wooden frame |
| 27 | M&L incl their transportation to Ponda/ Madgaon/ Altinho/ Bambolim area at respective unit location for removing unserviceable/damaged tops of Table with/without drawer 900x600x760mm, Table writing and fixing the new marine plywood BWP grade resin and conforms to the IS 303:2024 standard for interior use 18mm thick with decorative choice lamination both side 1mm thick including 6mm teak wood beading allaround duly fixed with neccessary fittings as Shade and Texture approved by GE and directed by Engr-in-Charge. The dimensions will be as per drg of the particular item. |
| 28 | Table with drawer 900 X 600 X 760mm [FD – 283] |
| 29 | Table without drawer 900 X 600 X 760mm [FD – 55] |
| 30 | Table writing [FD-249/FD 275] |
| 31 | Note for Item 1 to 6:1. The material should be supplied of same/superior specification kept in the office of GE Panaji. Contractor is requested to visit the site before quoting the rates.2. After scrapping, the item should be shown to Engr-in-charge before commencing any polishing work, else no payment shall be made neither for scrapping nor for polishing. Please Enable Macros to View BoQ information |
