|
| 1 | M&L and their transportion to each qtr/ barrack at Ponda/ Madgaon/ Bambolim/ Altinho area for removing old faded polish using polish removing agent / scrapper/ caustic soda or by any other means without damaging surfaces. Filling holes & knots with putty,rubbing with sand paper / abrasive cloth to obtain smooth and clean surface free from dust of furniture as listed below. Applying high gloss French Polish till glossy shine finish obtained complete all as shown on drawing and as specified and as directed. Note: The hidden unexposed surfaces shall be made smooth by sand papering and a coat of Pink / Wood Primer shall be applied as preservation coat. |
| 2 | Chair Dining [FD – 228 / FD – 279] |
| 3 | Chair Writing [FD – 250 / FD – 280] |
| 4 | Table Dining 8 Persons [FD – 273] |
| 5 | Table 1520x860x760mm [FD-273] |
| 6 | Table Dining 6 Persons [FD – 273] |
| 7 | Table Centre [FD – 235 / FD – 274] |
| 8 | Bed plywood top MAP Steel [FD/E6/MAP/08R] |
| 9 | Bed Hard [FD – 246] |
| 10 | Book Case [FD-237] |
| 11 | Teapoy Wooden [FD – 278] |
| 12 | Table with Drawer 900 X 600 mm [FD – 283] |
| 13 | Table without Drawer 900 X 600 mm [FD – 284] |
| 14 | Table 2' x 2' wooden [FD-293] |
| 15 | Chair Dining [FD / MAP – II / 04, FD / MAP – II / 05] |
| 16 | Centre / Corner Table of size 900 X 525 X 400 mm [TP,] |
| 17 | Hat Stand With Mirror [FD – 233] |
| 18 | M&L and labour and their transportion to each qtr/ barrack at Ponda/ Madgaon/ Bambolim/ Altinho area for removing broken particle board / plywood work of top,side&bottom including shelves of the following. S&F new marine plywood BWP grade conforming to IS 303:2024 standard for interior use for top,side&bottom 18mm thick with decorative laminate 1mm thick both sides including 6mm teak wood beading allaround duly fixed with neccessary fittings. Shade and Texture approved by GE and directed by Engr-in-charge. |
| 19 | Book Case [FD-237] |
| 20 | Trolley for TV MAP [FD/E6/MAP/04] |
| 21 | M&L and their transportion to each qtr/ barrack at Ponda/ Madgaon/ Bambolim/ Altinho area for dismantling and taking out carefully old unserviceable / worn-out and broken components of wooden furniture without damaging the remaining other serviceable members and supplying and fixing of the same with new components such as Wood Work / Wooden Members made of Teak Wood [Cat – I] wrought finished to required shape and size complete to its original shape and size all as shown on drawing, as specified and as directed for following articles: |
| 22 | TABLE DINING 8 PERSONS [FD – 273 / FD / E6 / MAP / 03] |
| 23 | Long Rail |
| 24 | Short Rail |
| 25 | Stiffener |
| 26 | CHAIR DINING [FD/E6/MAP/10(R ), FD/MAP II/05] |
| 27 | Rear Leg |
| 28 | Front Leg |
| 29 | Side Rail |
| 30 | Stiffener |
| 31 | Seat of 3mm thick weight not less than 0.39 kg Make - AMKO/COMFO/NILKAMAL best quality approved by GE |
| 32 | CHAIR WRITING [FD – 202 / FD – 250 / FD – 280] |
| 33 | Rear Leg |
| 34 | Front Leg |
| 35 | Arm Rest |
| 36 | Stiffener |
| 37 | BED HARD [FD – 246 / FD – 247] |
| 38 | M&L incl their transportation to Ponda/ Madgaon/ Altinho/ Bambolim area at respective unit location for removing old unserviceable Top and S&F marine plywood BWP grade resin and conforms to the IS 303:2024 standard for interior use 12mm thick, both sides of the top should be applied with single coat of wood primer and duly fixed with neccessary fittings approved by GE and directed by engr-in-charge. The dimensions will be as per drg of the particular item. |
| 39 | Head board of Bed hard and fixing new one of teak wood face veneer. |
| 40 | Footboard of size 55mmx25mmx545mm of teak wood face veneer. |
| 41 | S&F new one Long rail made of teak wood and removing broken long rail . |
| 42 | M&L incl their transportation to Ponda/ Madgaon/ Altinho/ Bambolim area at respective unit location for removing unserviceable/damaged tops of Teapoy, Table Centre, Peg Table and fixing the new marine plywood BWP grade resin and conforms to the IS 303:2024 standard for interior use 18mm thick with decorative choice lamination both side 1mm thick including 6mm teak wood beading allaround duly fixed with neccessary fittings as Shade and Texture approved by GE and directed by engr-in-charge. The dimensions will be as per drg of the particular item. |
| 43 | Teapoy FD – 278 / FD – 382] |
| 44 | Table Centre [FD – 274 / FD – 235] |
| 45 | Peg Table [FD – 384] |
| 46 | HAT STAND WITH MIRROR [FD – 233] |
| 47 | Mirror |
| 48 | M&L incl their transportation to Ponda/ Madgaon/ Altinho/ Bambolim area at respective unit location for removing old unserviceable parts and S&F marine plywood BWP grade resin and conforms to the IS 303:2024 standard for interior use 6mm thick for back side applying a coat of pink primer, marine plywood BWP grade resin and conforms to the IS 303:2024 standard for interior use 12mm thick with decorative choice lamination 1mm thick both side including 6mm teak wood beading allaround duly fixed with neccessary fittings as Shade and Texture approved by GE and directed by engr-in-charge. The dimensions will be as per drg of the particular item. |
| 49 | Stainless steel Hook |
| 50 | Note for Item 1 to 8:1. The material should be supplied of same/superior specification kept in the office of GE Panaji. Contractor is requested to visit the site before quoting the rates.2. After scrapping, the item should be shown to Engr-in-charge before commencing any polishing work, else no payment shall be made neither for scrapping nor for polishing. Please Enable Macros to View BoQ information |
