|
| 1 | Earthwork in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts, evelling , ramming the foundation trenches, removing roots of trees , surbs all complete as per approved design, building specification and direction of E/I. |
| 2 | Glass sheet (pin headed) 4mm thick |
| 3 | Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat/square bar as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials are not supplied by the department) |
| 4 | Providing and laying 6mm thick mosaic in skirting dado, steps and pillars of approved texture and colour over 12mm thick cement plaster (1:3) base with F.M. 1.5 rubbed and polished to granolithic finish, with approved quality of carborandum stone -do-do- all complete job as per specification and direction of E/I. With 100% white cement |
| 5 | Supplying, fitting and fixing 38mm thick good quality well dressed and well seasoned sal wood battened shutters, ledged and braced, in doors and windows, with oxidised iron fittings such as hinges, sliding door, bolts, tower bolts, handles or rings, hooks and eyes, cleats, sand blocks, as per schedule, taxes and royalty all |
| 6 | Easing and adjusting door and window shutters with chaukhats in old work complete as per specification and direction of E/I. |
| 7 | Taking down old door and window shutters including stacking serviceable materials within 15m lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of cenetering and shuttering - all work upto plinth level. 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone - III) : 3 graded stone aggregate 20mm nominal size) |
| 9 | Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I. |
| 10 | Providing two coats of dry distemper of approved shade and make over old surface -do- |
| 11 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over bed as per relevant IRC Code, filling the joints with fine sand etc. all complete as per the direction of E/I |
| 12 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume). |
| 13 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of cenetering and shuttering - all work upto plinth level. 1:4:8 (1 Cement :4 Coarse Sand (zone - III) : 8 graded stone aggregate 40mm nominal size) |
| 15 | Providing designation 75A brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 16 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zoneIII) : 4 graded stone aggregate 20mm nominal size). |
| 17 | Providing designation 75A Brick work in C.M (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 18 | Reinforced cement concrete work in beams, suspended floors , roofs having slope upto 15 degree landings, balconies, shelves, chajja, lintels, bands, plain window sills, staircase & spiral stair cases above plinth level upto floor five level excluding the cost of centering , shuttering finishing and reinforcement, with 1:1.5:3 (1 Cement : 1.5 Coarse Sand (zone - III) : 3 graded stone aggregate 20 mm nominal size). |
| 19 | Provided and laying 6mm Precoast glazed tiles in walls over 12mm, Cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbin, polishing -do- do-all complete job as per specification and direction of E/I. |
| 20 | Providing and laying in position cement concrete in retaining wall, return walls, wall (any thickness) including attached pilasters, columns, piers, abutments, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc, upto floor five level, excluding the cost of centering, shuttering and finishing. 1:1.5:3 (1 Cement :1.5 Coarse Sand (zone - III) : 3 graded stone aggregate 20mm nominal size) |
| 21 | Providing Tor steel reinforcement of 8mm. Dia rods as per approved design & drawing with cutting, bending and binding with annealed wire with cost of wire removal of rust, placing the rods in position {TMT Fe 500 (only valid for Tata(Tiscon),-do-do- all complete as per building specification and direction of E/I 8mm |
| 22 | Providng 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 23 | Providing two coats of dry distemper of approved shade and make over a primer coat of washing over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required scaffolding, washing of floors and taxes all complete as per building specification and direction of E/I. |
| 24 | Providing two coat of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification and direction of E/I. |
| 25 | White washing three coats over new surface in ceiling. |
| 26 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm -do- complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. |
| 27 | UV stabilised 2 mm thick corrugated FRP sheet |
| 28 | 600mmX450mm size mirror of 6mm thick plate glass |
| 29 | Glass sheet (Pin headed) 4 mm thick |
| 30 | Supplying fitting and fixing viterous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S approved make supported on painted -do-do-complete as per specification and direction of E/I |
| 31 | Supplying,fitting and fixing callapsible gate of approved size and make properly fabricated with vertical double channels 20X10X2 mm at 100mm. Centres and braced with M.S. flat diagonals 20 X 3mm, with top and bottom rails of T. iron 40x40x6mm with 38 mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction E/I. |
| 32 | Supplying, fitting and fixing M.S grill gate with M.S grills made of 20x6mm M.S flat or 16 mm M.S Square bars fitted on 25x25x6mm. M.S Angle frame-do-(When steel is not supplied by the deptt.) |
| 33 | U-PVC pipes(working pressure 4kg/sq.cm)single socketed pipe 75mm dia. |
| 34 | U-PVC pipes(working pressure 4kg/sq.cm)rubber seal ring 75mm dia. |
| 35 | U-PVC single equal tee(without door)75X75X75mm |
| 36 | UPVC bend 87.5 degree-75 mm bend |
| 37 | Supplying submesible pump sets confirming to IS 8034 and motar conforming to IS 9283.Pump shall be suitable for various delivery head and discahrge with stainless steel pump shaft and polypropylene /noryl impeller. Motor suitable for working on 415+10, 3PH, 50Hz, AC. supply with cable guard ,thrust carbon/ fiber bearing to withstand entire hydraulic thrust ,water proof winding shall be provided -do-do- |
| 38 | Carriage of Material |
| 39 | (i) Cement+ Steel-2km(P) |
| 40 | (iii) Sand [Lead-1KM(K)+24KM(P)] |
| 41 | (iii) Stone Chips [Lead- 1Km (K) + 24Km (P)] |
| 42 | (iii) Bricks [Lead- 1Km (K) + 7Km (P)] |
| 43 | Total |
| 44 | Add: 18% GST |
| 45 | Total Amount |
| 46 | Add : 1% Labour Cess Please Enable Macros to View BoQ information |
