Tender For Repair To Damaged Flooring Of Danger Building No. 94, 96 & 97 By Antistatic Conductive Epoxy Flooring At Primer Section Inside Factory At Ofv. Code Head No. 809/01 To 07) [Rd 2512]., Jalgaon-Maharashtra
TDR : 54664871
Tender Notice
BOQ
1 Days Left
Jalgaon
Maharashtra
Tender For Repair To Damaged Flooring Of Danger Building No. 94, 96 & 97 By Antistatic Conductive Epoxy Flooring At Primer Section Inside Factory At Ofv. Code Head No. 809/01 To 07) [Rd 2512].
Name of Work:- Repair to damaged flooring of danger building No. 94, 96 & 97 by antistatic conductive epoxy flooring at Primer section inside factory at OFV. Code Head No. 809/01 to 07) [RD 2512].
Sl. No.
Item Description
1
Items :
2
Dismantling wall/floor tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises as per SSR 2020.
3
Dismantaling of un-reinforced cement concrte in ground floors and pavings n exc 15 cm thickness (reinforcement cut as required to facilitate demolition) and removing excavated material exc. 250 m but n exc. 500 m etc complete as per SSR.
4
Excavating over soft areas, n exc 1.5 m deep and getting out Removing excavated material exc. 250 m but n exc. 500 m and depositing where directedetc complete as per SSR 2020.
5
M & L, broken stone hardcore of gauge n exc 63 mm deposited, spread & levelled in layers n exc 15 cm thick, watered and rammed with mechanical vibrator to a true surface etc complete as per SSR 2020.
6
Soling or sub base with 200mm & above size broken boulders or quarried stone, interstices filled, surface formed and rolled & consolidated to required gradient and camber etc complete as per SSR 2020.
7
Reinforced cement concrete type B1 1:2:4 (20mm graded) Foundations, including rafts and mass concreteetc complete as per SSR 2020.
8
Formwork to flat sides of concrete in plinth or ground Beams with Rough finish surfaces of concrete etc complete as per SSR 2020.
9
Deformed or twistted mild steel bars 6mm to 8mm dia & over cut to length bent to shape required including crank by bending spirally for hooping for column , hooking ends & binding with steel wire etc complete as per SSR 2020.
10
Taking down & refixing of door shutters in same opening exc 1 sq. m and n exc 2 sq. m each etc complete as per SSR 2020.
11
Rendering 15 mm thick in 1:4 cement mortar on fair faces of brick work & concrete surfaces including neeru finish etc complete as per SSR 2020.
12
Preperation of old untreated surfaces by brooming down, rubbing down including filling holes of nails and uneveness by putty & applying two coat of heat & fire resistence paint, as per SSR 2020.
13
Providing and applying 3 mm thick Antistatic conductive Epoxy Floor coating (Electro Static Discharge Coating) which consist of Epoxy Primer, underlay coat, conductive primer, copper grid of 25mm width, 50 to 100 microns applied in each 1 sq meter area and surface resistivity which will not exceed 10 Ohms, the cured surface shall be tested with Megohm Meter ESD (Electro Static Discharge) Coating Make:- Krayon, Nagpur Chemicals, ITW Chemin (Devcon) or substantial equivalent as directed by EIC. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
