|
| 1 | Supplying and erecting following contractors |
| 2 | MNX12 |
| 3 | MNX18 |
| 4 | MNX22 |
| 5 | MNX25 |
| 6 | MNX32 |
| 7 | MNX40 |
| 8 | MNX50 |
| 9 | MNX70 |
| 10 | MNX80 |
| 11 | MNX95 |
| 12 | MNX110 |
| 13 | MNX140 |
| 14 | MNX185 |
| 15 | MNX225 |
| 16 | MNX250 |
| 17 | MNX300 |
| 18 | MNX400 |
| 19 | MNX550 |
| 20 | MNX650 |
| 21 | SUPPLYING AND ERECTING FOLLOWING AXILLARIES CONTRACTORS |
| 22 | MX0 40E (4NO) |
| 23 | MX0 31E (3NO)+1 NC |
| 24 | MX0 22E (2NO)+2 NC |
| 25 | MX0 13E (1NO) +3NC |
| 26 | MX0 04E (4NC) |
| 27 | SUPPLYING AND ERECTING FOLLOWING MN2 RELAY |
| 28 | 1.4-2.3 |
| 29 | 2-3.3 |
| 30 | 3.00-5.00 |
| 31 | 4.5-7.5 |
| 32 | 6.00-10.00 |
| 33 | 9.00-15.00 |
| 34 | 14.00-23.00 |
| 35 | 20.00-33.00 |
| 36 | 24.00-40.00 |
| 37 | SUPPLYING AND ERECTING FOLLOWING MN2 RELAY (CT OPERATED) |
| 38 | 28.00-46.5 |
| 39 | 42.00-69.00 |
| 40 | 60.00-100.0 |
| 41 | 90.0-150.0 |
| 42 | 135.0-225.0 |
| 43 | 180.0-300.0 |
| 44 | 270.0-450.0 |
| 45 | SUPPLYING AND ERECTING FOLLOWING 1 pole MCV(C-Curve) |
| 46 | Supplying and erecting 2 Pole MCV9C-Curve) |
| 47 | Supplying and erecting following 3Pole MCV 9C-Curve) |
| 48 | Supplying and erecting following 4 Pole MCV 9C-Curve) |
| 49 | Supplying and erecting following D SINE MCCB 3 POLE |
| 50 | DN0-100 C |
| 51 | DN 1-250C RANGE 100-125 |
| 52 | DN1-250 C Range 125-160 |
| 53 | DN1-250C Range 160-200 |
| 54 | DN1-250C Range 200-250 |
| 55 | DN2-250D Range 100-125 |
| 56 | DN1-250C Range 100-125 |
| 57 | DN2-250D Range 125-160 |
| 58 | DN2-250D RANGE 160-200 |
| 59 | DN2-250D RANGE 200-250 |
| 60 | DN3 B-400D Range 250-320 |
| 61 | DN3 B-400D Range 320-400 |
| 62 | DN3 -630D Range 250-630 |
| 63 | Supplying and erecring following D SINE MCCB 4 POLE |
| 64 | DN0-100C |
| 65 | DN1-250C RANGE 100-125 |
| 66 | DN1-250C RANGE 125-160 |
| 67 | DN1-250C RANGE 200-250 |
| 68 | DN2-250D RANGE 100-125 |
| 69 | DN2-250C RANGE 100-125 |
| 70 | DN2-250D RANGE 125-160 |
| 71 | DN2-250D RANGE 160-200 |
| 72 | DN2-250D RANGE 200-250 |
| 73 | DN3B-400D RANGE 250-320 |
| 74 | DN3B-400D RANGE 320-400 |
| 75 | DN3B-630D RANGE 250-630 |
| 76 | SUPPLYING AND ERECTING FOLLOWING ROTARY HANDLES |
| 77 | DN0 Direct ROM |
| 78 | DN1 DIRECT ROM |
| 79 | DN2 DIRECT ROM |
| 80 | DN3B,DN3 DIRECT ROM |
| 81 | DN0 Exteneded ROM |
| 82 | DN1 EXTENDED ROM |
| 83 | DN2 EXTENDED ROM |
| 84 | DN3B, DN3 EXTENDED ROM |
| 85 | DN4 EXTENDED ROM |
| 86 | SUPPLYING AND ERECTING FOLLOWING SUPER HEAVY DUTY CAPACITORS |
| 87 | 3 to 5 |
| 88 | 7.5 to 15 |
| 89 | 20 & 25 |
| 90 | Supplying and erecting following standard duty capacitors |
| 91 | cylindrical 1 to 6 kVAR-series LTCCF |
| 92 | 7.5 to 25 kVAR- series LTCCD |
| 93 | Box 1 to 6 kVAR- series LTBCF |
| 94 | 7.5 to 30 kVAr series LTBCD |
| 95 | Supplying and erecting following APFC CONTROLLER(L&T etaSMART-R) |
| 96 | STEP 4 (96*96) size |
| 97 | STEP 6 (96*96) size |
| 98 | STEP 8 (96*96) size |
| 99 | STEP 12 (144*144) size |
| 100 | STEP 14 (144*144) size |
| 101 | STEP 16 (144*144) size |
| 102 | supplying and erectiong following current transformer |
| 103 | 100*5 |
| 104 | 125*5 |
| 105 | 150*5 |
| 106 | 200*5 |
| 107 | 300*5 |
| 108 | 400*5 |
| 109 | 500*5 |
| 110 | Supplying and erecting following connector PVC |
| 111 | 2.5mm |
| 112 | PUSH BUTTON GREEN, RED, TECNIC MAKE 22.5 mm |
| 113 | NO,NC ELEMENT TECNIC MAKE |
| 114 | SUPPLYING AND ERECTING FOLLOWING ELECTRICAL ITEMS |
| 115 | INDICATOR R,Y,B MAKE- TECNIC, 22.5mm |
| 116 | VOLTMETER range 0-500 V 96*96 |
| 117 | CT OPERATED AMMETER Range 0-200Amp,96*96 |
| 118 | ROTARY SWITCH R,Y,B Amp/V |
| 119 | C- CHANNEL |
| 120 | REWINDING OF ELECTRIC MOTORS OF ALL TYPES WITH COPPER WIRE, overhauling with minor repairs, lubricating of ball bearings and bus bearings and replacing screws etc. |
| 121 | upto 40 HP (per HP) |
| 122 | upto 175 HP (per HP) |
| 123 | Rewinding of submercible pump,motors in borewells of all types upto 5 HP with coated copper wire and overhauling with minor repairs, lubricasting of ball bearings and bush bearings and replacing screws |
| 124 | Replacing the existing bearings of approved make for electric motor |
| 125 | upto 7.5HP |
| 126 | upto 12.5 HP |
| 127 | UPTO 25 HP |
| 128 | UPTO 40HP |
| 129 | UPTO 135 HP |
| 130 | upto 175 HP |
| 131 | SUPPLYING AND ERECTING No-volt-coil for motor |
| 132 | upto 7 HP |
| 133 | UPTO 15 HP |
| 134 | UPTO 25HP |
| 135 | UPTO 40HP |
| 136 | UPTO 135 HP |
| 137 | UPTO 175 HP |
| 138 | SUPPLYING AND ERECTING THERMAL OVERLOAD RELAY FOR MOTOR |
| 139 | UPTO 40HP |
| 140 | UPTO 135HP |
| 141 | UPTO 175HP |
| 142 | SUPPLYING AND ERECTING CONTRACTOR FOR MOTOR STARTER |
| 143 | UPTO 25HP |
| 144 | UPTO 40HP |
| 145 | UPTO 90HP |
| 146 | UPTO 135 HP |
| 147 | UPTO 175 HP |
| 148 | SUPPLYING AND ERECTING AND TERMINATING XLPE ALUMINIUM ARMOURED CABLE |
| 149 | 2C*10 SQMM |
| 150 | 4C*10 SQMM |
| 151 | 4C*16 SQMM |
| 152 | 4C*25 SQMM |
| 153 | 4C*35 SQMM |
| 154 | 4C*50 SQMM |
| 155 | 3.5C*70 SQMM |
| 156 | 3.5C*95 SQMM |
| 157 | 3.5C*120 SQMM |
| 158 | 4C*70 SQMM |
| 159 | 4C*95 SQMM |
| 160 | 4C*120 SQMM |
| 161 | 4C*150SQMM |
| 162 | 4C*180 SQMM |
| 163 | 4C*240 SQMM |
| 164 | 4C*300 SQMM |
| 165 | SUPPLYING AND ERECTING AND TERMINATING XLPE COPPER UNARMOURED CABLE |
| 166 | 1C*25 SQMM |
| 167 | 1C*35 SQMM |
| 168 | 1C*50 SQMM |
| 169 | 2C*2.5 SQMM |
| 170 | 2C*4 SQMM |
| 171 | 2C*6 SQMM |
| 172 | 2C*10 SQMM |
| 173 | 3C*2.5 SQMM |
| 174 | 3C*4 SQMM |
| 175 | 3C*6 SQMM |
| 176 | 4C *4 SQMM |
| 177 | 4C*6 SQMM |
| 178 | 4C*10 SQMM |
| 179 | PROVIDING AND ERECTING EPOXY STRAIGHT THROGH JOINT OUTDOOR/INDOOR FOR LTXLPE ARMOURED CABLE |
| 180 | 2.5 TO 16 SQ |
| 181 | 25-50 SQ |
| 182 | 70-95 SQ |
| 183 | 120-185 SQ |
| 184 | 240SQ.MM |
| 185 | 300 SQ.MM |
| 186 | SUPPLYING AND ERECTING CRIMPIN/G TYPE COPPER LUGS FOR CABLE |
| 187 | UPTO 50 SQMM |
| 188 | UPTO 70-120 SQMM |
| 189 | UPTO 150-300 SQMM |
| 190 | FAULT DETECTION AND REPAIRING OF MCC PANEL AND ATS PANEL |
| 191 | FAULT DETECTION AND REPAIRING OF MCC PANEL AND ATS PANEL AS PER SITE REQUIREMENT |
| 192 | SUPPLYING AND ERECTING FOLLOWING ELECTRICAL ITEMS |
| 193 | M P R D2 440A |
| 194 | M P R D2 240A |
| 195 | MCCB/MPCB(OPTIONAL ) |
| 196 | PHASE FAILURE RELAY |
| 197 | MOTOR PROTECTION RELAY (M P R D2) |
| 198 | Gic TIMER MICON 225 (Gic) |
| 199 | current transformer 200/9A |
| 200 | CT Operated overload for 70HP |
| 201 | 1.5 sqmm wire grey color |
| 202 | 1.5 sqmm end sealing lug |
| 203 | 1.5 sqmm end sealing lug dual |
| 204 | insulation tape |
| 205 | DIO RAIL |
| 206 | MULTIMETER, TONGMETER |
| 207 | MULTI TESTER METER |
| 208 | PLYER SET |
| 209 | INDICATOR R Y B MAKE-CNIC 22.5mm |
| 210 | voltmeter range 0-500V 96*96 |
| 211 | CT operated ammeter range 0-200amp,96*96 |
| 212 | Sub Stations Works |
| 213 | supply of transformer oil |
| 214 | overhauling of 315 KVA TRANSFORMER |
| 215 | SUPPLYING AND ERECTING 11 KV OUTDOOR TYPE GANG OPERATED AIRBREAK, TRIPPLE POLE SWITCH 200A CAPACITY WITH 3 POST pin type insulatorper phase,mounted in horizontal or vertical position with necessary channel on provided cross arm with adquate length of (C class GI pipe for operating handle erected on extended square shaft. the operating handle provide with lock and key at suitable height from ground level with necessary clamp) |
| 216 | suplplying and eracting 11kv outdoor type gang operated air break, triple pole switch 40mm A capacity with 3 post pin type insulator per phase, monted in horizontgal or vertical position with necessary channels on provided cross arm with adequate length of \\"C\\" class G. I pipe for operating handle eracted on txtended square shaft. The operating handle provided with lock and key at suitable height from ground level height from ground level with necessary clamp. |
| 217 | supplying and eracting, 11 kv outdoor type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M. S channel with working current of 15 A capacity complete eracted on provided cross arm |
| 218 | supplying and eracting fencing of section having sixe 2450mm in height from ground level and 1200 mm width with angle iron frame work eracted in CC foundation and painted complete as per specification no SS-AS/FSG |
| 219 | supplying and eracting 50*50*6 mm angle iron as corner support 2, long fixed at the middle of the fencing frame and the other side inclined at 30 degree angle, in cement concerte foundation of 15*15*40 cm complete duly painted with one coat of red oxide and two coats aluminium paint complete. |
| 220 | supplying and eracting double leaf hinged door Each 1500 mm in width *1850mm in dheight using B class, GI pipe with angle iron supports, chain link wire mesh (jali) complete supported on channel iron, eracted in foundation, and painted complete |
| 221 | supplying and eracting barbed wire two ply with 12 SWG ply and 12 SWG barb with a gap between two bars of 75mm . Firmly fixed on provided angle supports with necessary materials complete. (6.044 meters/kg |
| 222 | transportation of 11/22 kV transformer above 315 kVA without loading & unloading (for handing over to section store/ repair works only) |
| 223 | Dismentling the existing distribution transformer of any capacity from plinth/ foundation safely without any damages |
| 224 | dismantling existing DO /AB switch set complete from D.P structure in an approved manner. |
| 225 | Supplying and eracting 11kV fuse barrel with metal fittings complete. |
| 226 | supplying and eracting hard drawn copper solid wire no. 0 to SWG complete eracted for connections on H. T sides. |
| 227 | supplying and erecting extra thick alkathene pipe 10 mm dia eracted to enclose bare conductor wires complete. (Use shall be resstricted to H.T) |
| 228 | Supplying heavy duty operasting rod, outer dia 25mm & inner dia 20mm suitable for 11 kv with brass couplings etc. for removing drop out fuses at 6 meters length, 4 pieces Each with rain shade with hand grip including earthling chain 1.5 mm complete. |
| 229 | Supplying and eracting copper tubular bus 20mm dia 1.6mm (16SWG) thick for the use of high tension over head bus and eracted on provided HT insulators with clamps, nuts and bolts complete. (weight per meter of bus is about 1.7 kg) |
| 230 | Supplying and eracting clamps,. Made out of 25*3 mm. copper strips to be fixed to tubular bus for fconnecting the bare copper wire to other equipment, with brass nuts nolts of suitable dia complete. |
| 231 | Supplying and eracting anti climbing devices, fabricated from pole clamps of MS flat 40*l5 mm, with drooping spikes 15 cm. in length, welded to it and eracted on pole complete |
| 232 | 315 KVA tramsformar rent per day |
| 233 | Supplying and fixing PVC synthetic elastomer electrically insulating mat with classs B insulation conformaing to IS; 15652 -2006 having 2.5mm thickness up to 11 kV. |
| 234 | पंप दुरुस्ती |
| 235 | ४० एचपी मोटर पंप चे शाफटिंग आउट काढणे |
| 236 | ४० एचपी मोटर पंप नवीन बेअरिंग टाकणे |
| 237 | ३० एचपी मोटर पंप चे शाफटिंग आउट काढणे |
| 238 | ३० एचपी मोटर पंप नवीन बेअरिंग टाकणे |
| 239 | ४० एचपी मोटर पंप नवीन शाफटिंग तयार करणे |
| 240 | ३० एचपी मोटर पंप नवीन शाफटिंग तयार करणे |
| 241 | १३५ एचपी मोटर पंप रीपेरींग करणे |
| 242 | १३५ एचपी मोटर पंप खोलणे व फिटिंग करणे |
| 243 | १३५ एचपी धावडा व पिंपरी हेडवर्क्स मोटर पंपाचे शाफटिंग चे आउट काढणे, नवीन बनवणे खोल फिटिंग सह Please Enable Macros to View BoQ information |
