|
| 1 | SITC of Automatic Lift (as per manufacturer design & as per detailed specification below conforming to IS) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as reqd. |
| 2 | .Make : OTIS / KONE/SCHINDLER |
| 3 | Type: Bed cum Passenger Lift . |
| 4 | Load: 20 Passenger / 1360 Kg |
| 5 | Control- Microprocessor based with AC variablevoltage & variable frequency ( VVVF) |
| 6 | Machine:- Energy efficient machine, Gearless, with out Machine Room |
| 7 | Position of Machine Room: - Not applicable |
| 8 | Speed: 1.0 Mtrs./ Sec |
| 9 | Floor served : G+1 |
| 10 | Landing:- 2, all on same side |
| 11 | Total Rise : 4.8 Mtr |
| 12 | Operation- Microprocessor based simplex full collective with or without attendant. |
| 13 | Signals Digital car position indicator,car travelsdirection indicator in car & at all landing with callregistration indicator. |
| 14 | Leveling accuracy: +- 5 mm(Micro levelling arrangement) |
| 15 | Car Dimension :1400 mm wide x 2150 mm deep x 2200 mm high |
| 16 | Door Dimension : 900 mm wide x 2000 mm internal height |
| 17 | Car Enclosure : Stainless Steel sheet (20 SWG) with Hairline finish with hand rail. |
| 18 | Car Ceiling & Lighting: Stainless Steel with hairline finish with I ED lighting and Fan |
| 19 | Car Ventilation: Pressure fan with anodized aluminium grill. |
| 20 | Car Flooring: Decorative granite fiooring (As per direcion of EIC and according to this Department's Order). |
| 21 | Car Door: Stainless Steel centre opening automatic door provided with V3F controlled door drive system |
| 22 | Landing Door: Stainless steel centre opening automatic door provided with V3F controlled door drive system |
| 23 | Door Opening: Automatic power oprated door with full length PhotoccH assembly light curtain sensor |
| 24 | PROTECTIVE DEVICES & OTHERACESSORIES |
| 25 | ARD: Automatic rescue device complete with dry maintenance free batteries as required.for automatic evacuation to the nearest floor in case of power failure / single phasing/others. |
| 26 | Overload Protection: Fully loaded with overload protection. On overloading the lift car will not start with door remaining open and give audio display indication |
| 27 | Emergency lighting in car : Battery operated emergency lighting in the lift car. |
| 28 | Intercom system : Battery operated intercom system in Lift Car, Machine Room & Control Room |
| 29 | Emergency Alarm: Battery operated alarm bell system in lift car and control room |
| 30 | Fireman switch : Fireman switch at main landing terminal. |
| 31 | Voice Synthesizer : Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator. |
| 32 | Main rope : As per manufacturer's standard conforming to IS |
| 33 | DIMENSION OF SHAFT & POWER SUPPLY |
| 34 | Available Shaft Dimension : 2500 mm width and 1950 mm depth |
| 35 | Pit Depth : 1750 mm |
| 36 | Overhead: 4600 mm |
| 37 | Electric power supply : AC 415 Volt 3phase, 50 Hz, terminated in machine room as per IS |
| 38 | Cost for all massonary & fabrication work for installation of Lift & allied accessories, patch modification, temporary or related makeshift arragement regarding lift installation, minor civil work, Scaffolding, wall/floor cutting, pocket cutting on wall and mending good the damages properly is to be included. Please Enable Macros to View BoQ information |
