|
| 1 | Earth work open excavation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. Complying with Standard Specifications as per SS 20 A MORTH 24 & 25 |
| 2 | Supply and fixing of 8 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal door) with 1 No 250A 4P MCCB as incoming and 7 Nos 63A 3P MCB , 3 Nos 6A to 32A SP MCB as outgoing with suitable cable end box on suitable angle iron frame on wall with Earth connection only. Higher End(SD 624) |
| 3 | Supply and fixng of TNEB meter board suitable for 3phase 200A service connection made up of suitable angle iron frame work of size 3feet x 2feet using angle iron of size 1-1/2\\"x11/2\\"x1/4\\" rigidly fixed on wall covered with hylem sheet of size 3feet x 2feet of 12mm thickness with necessary bolt sandnuts support sand supply and fixing of 3Nos. 200A fuseunits (500V),1No. neutra llink, copper earth flat of size 1\\"x1/4\\" with inter connection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete(SD 134) |
| 4 | Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb(SD 84) |
| 5 | Supply and fixing of 8 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal door) with 1 No 160A 4P MCCB as incoming and 6 Nos 63A 3P MCB , 6 Nos 6A to 32A SP MCB as outgoing with cable end box on suitable angle iron frame on wall with Earth connection only. Higher End(SD 623) |
| 6 | Supply and fixng of TNEB meter board suitable for 3phase 100A service connection made up of suitable angle iron frame work of size 2feet x 1-1/2feet using angle iron of size 1-1/2\\"x1-1/2\\"x1/4\\" rigidly fixed on wall covered with hylem sheet of size 2feet x 1-1/2feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3Nos. 100A fuse units (500V), 1No. neutral link,copper earth flat of size 1\\"x1/4\\" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete(SD 133) |
| 7 | Supply and fixing of 3phase 32A aerial fuse unit for 3Nos. 32A fuse units(500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps(SD 135) |
| 8 | Supply and fixing of 63A TPNMC switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing(SD 149) |
| 9 | Supply and fixing of 100A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double brEak on suitable angle iron frame work with MS cable entry boxes with PWD Earthing.(SD 642) |
| 10 | Supplying and fixing in position of the following PVC / G.I pipes and specials best approved quality conforming to ISS and providing leak proof joint with PVC adhesive etc., complete complying with standard specification. 10.00Sq.mm Copper Caple |
| 11 | 50mm GI Pipe |
| 12 | Dismantling , bead channel cutting and welding work ,new panel lifting and fixing , cable laying , lug grumping and insulating ,termination , motor running testing work including transport and crane charge etc |
| 13 | Lowering PVC/ DWSC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste. Please Enable Macros to View BoQ information |
