|
| 1 | PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by Engineer-in-charge:Overall size 1.5sq.mm(Un-sheathed) |
| 2 | XLPE INSULATED UN-ARMOURED CABLES (LOOSE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications: overall sie 16sqmm (4core) Un-armoured (loose) |
| 3 | GALVANIZED IRON PIPES AND G.I. EARTHINGSupply & erection of G.I. pipe (A-Class) as per IS:1239(Part-I) 2004 including sockets, bends, inspectionboxes, Steel hooks, GI saddle clamps and other pettymaterials etc., where necessary including paintingas per PWD General Specifications:Earthing earth rod 20 mm dia for providing earthconnections upto line earthwith G.I. Wire 8 S.W.G. (4mmdia.). The rod shall be tapered at one end and flatted onother end. The hole size 10mm dia shall be drilled onthe flatened side for facilitating connection withG.I. wire and thimble etc. Therod shall be erected in groundupto completevertically GI Earth rod 20 mm dia.,3 mtr. Long |
| 4 | R: ((i) ) S/E of Microprocessor BasedStreet Light Controller withdigital time switch daily programmed with stand bylithium battery with back up of 6 years with min. timebetween 2 switching operations is 1 minute, threepole power contactors 40A.with coil voltage 220-230V AC with 1 no. aux. contact NO,MCB 2 pole 40amp. (C-Curve, 10kA) & power wiring withsingle core PVC insulated FR cable 10 sq. mm and controlwiring with PVC insulated FR cable 1 sq. mm, 1 no. twoposition selector switch to bypass timer and otheraccessories & petty material (din rail, 4 pole bakeliteterminal strip 63A/ 440V AC, required nut bolts) should befixed on bakelite sheet 6mm thick to be mounted in a IP54surface/ flush mounting powder coated sheet metal(1.60mm thick) cabinet having size 450mm x 600mmx 150mm to switch ‘ON’ all the 3 phases & switch ‘OFF’ 3phases pre-fixed timingsphases pre-fixed timings complete in all respect as persatisfaction of Engineer-in-charge: Street Light Controller (For Three Single Phase Circuits)with 3 Nos. Three Pole Power Contactors 40A, 1 no. aux.contactor 6 amp. (2NO+2NC) with coil voltage 220V AC, 3Nos. MCB 2 Pole 40amp. (C-Curve,10kA)& petty material (Din rail, 2 Nos. 4pole bakelite terminal strip 63A/ 440V AC, required nutbolts) |
| 5 | GALVANIZED STEEL OCTAGONAL POLES FORWIND VELOCITY OF 169 Km/ HOUR:Supply and erection of Galvanized Steel OctagonalPole (Sheet thickness 3mm) designed to withstand windspeed 169km/ hour of suitable length (Raw confimingto material IS-5986 (FE-510), BSEN-10025S-355Jor ASTM-572A (GR-50)) and thickness of galvanization(70mm thick) conforming to IS:2629/ IS:2633/ IS:4759,BSEN-ISO-1461-1991 OR ASTM-A123/A123M-02. Thepole shall be in single piece hot dip galvanized and shallbe tapered towards the top.The bottom section shall have openable slot with exteriorsurface door & shall have suitable locking arrangementfor housing three phase 4wire cable connection, bakelitesheet, MCB, loop in and out arrangement for incoming/outgoing cables. There shall be suitable arrangement forearthing. Rigid Base plate of suitable size and thicknessshall be welded inside and outside at the bottom of polewith provision for fixing 4 foundationbolts. The octagonal pole shall be boltedon a pre- cast foundation witha set of four foundation boltsfor greater rigidity. Thefoundation shall be erected over cement concrete M20with steel of given size as per design of original pole manufacturer to fixed up to a required planting depth belowground level as required: Galvanized Octagonal Pole Overall Length 6 metre(Sheet thickness 3mm), Top dia.(A/F) 70mm and bottomdia. (A/F) 130mm, Foundation size below G/L 550mm x550mm x 1200mm, 4Nos. Foundation Bolts size 20mmdia., Length=600mm with Base Plate Dimensions 220mm x 220mm x 12mm Thick |
| 6 | SINGLE/ DOUBLE ARM BRACKETS:Supply and erection of bracket for galvanized octagonal pole,the bracket should be fixed on the top of the pole having topouter dia. 70mm to 90mm (A/F) complete in all respectas approved by the Engineer-in-charge at site:((c)) Single arm bracket 1.5 metre long for galvanizedoctagonal pole |
| 7 | DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES: Supply and erectionof Double Walled Corrugated (DWC) HDPE pipe to be laid1mtr. below ground level including excavation placingthe pipe in position and back filling with excavated soil etc.of the required size: Double WalledCorrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.) |
| 8 | Supply and Erection of LED Street Light 36 watt (includingLED driver) with pressure die cast aluminium housing withcontrol gear ( with IP 65/ IP 66 protection), CRI Minimum70, CCT >5700K, toughened glass fitting, LED fixtureminimum 120 lumens per watt and operating voltagebetween140to270volt,THD <10%ingress protection (asper BIS standards) , surge protection10kvandabove(asper (IS/IEC standards) wattage of each LED HighpowerLEDof1wattto5watt with mandatory modularlenses, inputACfrequency50 Hz±3%5yearwarrantyincluding their drivers completealongwitherectionof thesamewithconnections, testing etc. complete in allrespects as approved and desired by theEngineer-in-chargeatsite.LED Fitting as per Specificationsapproved by Hon. Tech. Advisor to CM Punjab videLetter no AT-2021/GL 1410-1422 Dated06/05/2021. Dated 06/05/2021. Besides this thelighting fixturemanufactures should have in house NABLaccredited labortary Please Enable Macros to View BoQ information |
