|
| 1 | Excavation in earth work in foundation and trenches in all kind and classification of soil such as pick work, jumper work, pick jumper work, blasting work and hard blasting work and saturated soil including chiseling or any other mixed verity of soil dewatering and/ or removal of slush and other incidentials, lift up to any height stacking the excavated soil upto any leads and lifts clear from the edge of the excavation and then returning the stacked soil in any thickness of layers when required into plinth side of foundation etcetera consolidating each deposited layers by ramming watering and then disposing of all surplus excavated earth as specified dumping place as per direction of Engineer in charge with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax or other taxes imposed by the Government. |
| 2 | Excavation in earth work and filling in 15cm (fifteen centimetre) layers in foundation and plinths including ramming, watering and consolidating up to all leads and lifts , carriage of materials and other incidentals complete as per the direction of Engineer-in-Charge. The rate includes octroi, royality, Malkana, toll tax, goods service tax or other taxes imposed by the Government. |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. as per CPWD specifications 2019 complete and direction of Engineer-in- charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials.The rate includes octroi , royality , Malkhana , toll tax, goods service tax , labour cess or other taxes imposed by the Govt. |
| 4 | Providing and laying 1:4:8(one cement: four sand: eight graded crushed stone aggregate 40mm (forty millimetre) nominal size and curing complete including cost of form work if required in foundation and plinth as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax or other taxes imposed by the Government. |
| 5 | Providing form work with steel plates 3.15mm (three point fifteen millimetre) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies including dewatering or bailing out water required to at site complete up to any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work in foundations, footings, bases of columns and mass concrete and plain concrete including plinth beams and columns upto all floor level as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government |
| 6 | Providing and laying cement concrete 1:2 :4 (1cement:2sand:4crushed graded stone aggregates 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor roofs landing and shelves and their support balconies, beams, girders bressumers and cantilever upto any floor level as directed by the Engineer-in-charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax or other taxes imposed by the Government. |
| 7 | Brick work using common burnt clay Second class building bricks in foundation and plinth in cement mortar 1:6 (One cement: six sand) in all heights and depth as directed by the Engineer-in-charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax or other taxes imposed by the Government. |
| 8 | 15mm (Fifteen millimetre) thick cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (One cement: Six sand) as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax or other taxes imposed by the Government. |
| 9 | Providing plinth protection 50mm (Fifty milimetres) thick with cement concrete 1:3:6 (one cement : three sand : six graded/crushed stone aggregate 20mm (twenty milimetres) nominal size, including finishing the top surface of concrete smooth as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax or other taxes imposed by the Government. |
| 10 | Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting fixing in position and applying a priming coat of red lead paint in beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax or other taxes imposed by the Government. |
| 11 | Steel work welded in built up sections,trusses and framed work Anar kali type cast iron jali work ,including cutting ,hoisting fixing in position and applying a priming coat of red lead paint in ,grating framed guard bars,ladders,railing and simillar works as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax or other taxes imposed by the Government. |
| 12 | Providing and fixing M.S. BP Sheet 1.66mm (One point six six millimetre) to 2mm (two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax or other taxes imposed by the Government. |
| 13 | Providing and fixing 0.60mm (zero point sixty millimetres) thick prepainted steel sheet in roofing (Khaprail type) with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetres) dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax or other taxes imposed by the Government. |
| 14 | Providing and fixing ridges or hips 60cm (sixty centimetres) overall with 0.60mm (zero point sixty millimetres) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia and prepainted G.I. limpet and bitumen washers complete with all accessories as required as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government |
| 15 | Kota stone slab flooring minimum size 55x55cm.(fifty five into fifty five centimetre) laid over 20mm (twenty millimetre) thick base of cement mortor 1:4(one cement :four sand) and jointed with gray cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete 30mm (thirty millimetre) thick.upto all floor level as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax or other taxes imposed by the Government. |
| 16 | Kota stone slab 20mm (twenty millimetre) thick in risers of steps ,skirting dado and pillars laid on 12mm (twelve millimetres) thick cement mortar 1:3(one cement: three sand) and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete upto floor all level as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax or other taxes imposed by the Government. |
| 17 | Providing and laying granite stone in flooring 20mm (twenty millimetre) average thickness laid on cement mortar 1:3 (1cement:3 sand) and jointed with gray cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete 20mm (twenty millimetre) thick.upto all floor level as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax or other taxes imposed by the Government. |
| 18 | Providing and fixing Eversest fibre cement sheet ceiling fire and moisture resistant of size 610x610x6mm (six hundred ten into six hundred ten into six millimetre) of approved quality with butt jointing and stainless screws excluding frame work and cover fillets as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax or other taxes imposed by the Government. |
| 19 | Painting steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.80 ltr/10 sqm of approved brand and manufacture as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government. Please Enable Macros to View BoQ information |
