|
| 1 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material upto 1000m lead including cost of all labour, machinery etc complete as per Technical Specifications and Clause - 201 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 2 | Excavation for road work in soil with hydraulic excavator of 0.9cum bucket capacity including cutting and loading in trippers, trimming bottom & side slopes in accordance with requirements of lines, grades and cross sections and transporting to the embankment locations with all lifts & leads upto 1000m as per approved Drawing & Technical Specifications and as per Clause - 301 of MoSRT&H Specifications for Road & Bridge works (Latest Revision). |
| 3 | Earth work in excavation in foundation in all kinds of soil etc as per drawing and technical specification, including setting out, dressing of section to correct line, level, grade & utilising the surplus earth locally for road work wherever required, backfilling the excavation earth to the extent required complete in all respect as per Clause 301 & 304 of Specification for road & bridge work of MORT&H (5th Revision) & Direction of Engineer in charge. |
| 4 | Loosening to a depth of 150mm, leveling and compacting original ground supporting embankment /sub-grade as per approved drawing and technical specifications complete in all respect as per Section 900 and Clause 305, 305.3.4 of MoRT&H Specification for Road & Bridge works (5th Revision) & including cost of all labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. |
| 5 | Construction of embankment with approved materials deposited at site from road-way cutting and excavation from Drain and foundation of other structures graded and compacted to meet requirement of table 300-2 of MoRT&H Specification for Road & Bridge works (5th Revision) & including cost of all labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. |
| 6 | Providing compacted shoulder with granular materials by using moorum of approved quality, watering and compacting with PRR to achieve the required density in OMC complete in all respect as per approved drawing and technical specifications as per Section 900 and Clause 408 of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. |
| 7 | Construction of embankment with approved materials obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting tomeet requirement oftable 300-2 as per approved drawing and technical specifications and as per Clause 305 of MoRT&H Specification for Road & Bridge works (5th Revision) |
| 8 | Providing, filling sand of approved quality in road work and foundation trenches of structures in uniform layers, watered and rammed/ compacted as per approved drawing and technical specifications complete in all respect as per Section 900, 2100 and Clause 401 & 304 of MoRT&H specifications for Road & Bridge works (5th Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. |
| 9 | PCC M-15 Grade in foundation bed using 40 to 10mm size crushed stone aggregates mixed by Batching plant, laying in layers and compacting by vibrator &all leadsand lifts as per approved Drawing & Technical Specifications and Section 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (Latest Revision). |
| 10 | Supplying, Fitting, Fixing, Placing and Driving in position Steel Liner of 6mm to 10mm thick for Pile shaft including cost, conveyance all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Section 1100 & 1900 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 11 | RCC M-35 grade Bored cast-In-situ pile of 1.200m dia excluding reinforcement complete including removal of excavated earth with all leads & lifts up to 1000mtr including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1100 & 1700 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 12 | RCC M-35 grade in Pile Cap for abutment and pier with formwork using 20 to 10mm size crushed stone aggregates mixed by Batching plant, laying with all leads and lifts & compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1100/1200, 1500 & 1700 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 13 | RCC M-30 grade in foundation of retaining wall with formwork using required aggregates mixed by Batching plant, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1200, 1500 & 1700 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 14 | RCC M-30 grade in sub structure of abutment / Pier with formwork using required aggregates mixed by Batching plant, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1200, 1500 & 1700 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 15 | RCC M-30 grade in Sub-structure Abutment/Pier cap & Corbel with formwork using required aggregates mixed by Batching plant, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and as per Section 1500, 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (Latest Revision). |
| 16 | RCC M-40 grade in Superstructure Pedestal work as per approved Drawing & Technical Specifications and Section 1200, 1500 & 1700 of MoRT&H Specifications for Road & Bridge works (Latest Revision). |
| 17 | RCC M-30 grade in Superstructure Box-Girder with Deck Slab including cost of all materials, labour, charges for machinery, T&P, centering & shuttering etc complete as per approved Drawing & Technical Specifications and Section 1200, 1500 & 1700 of MoRT&H Specifications for Road & Bridge works (Latest Revision). |
| 18 | PCC M-20 Grade in sub-structure of Toe wall work using 40 to 10mm size crushed stone aggregates mixed by Concrete Mixture, laying in layers and compacting by vibrator including frame work cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1500, 1700, 2100 & 2200 of MoRT&H Specifications for Road & Bridge works (Latest Revision). |
| 19 | RCC M-30 grade in Approach slab including steel of CD work with formwork using 20 to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1500, 1600, 2300 & Clause- 2704 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 20 | Supplying ,Cutting, Bending, Binding, Straightening, Placing HYSD bars confirming to grade I.S.1786-1985 (Fe-500) for steel reinforcement works for finished item of works as per drawing and technical specification and as per Section.900, 1000, 1600,2100, 2200 & 2300 of specifications for Road and Bridge works of Ministry of Road Transport & Highways (5th Revision) & including cost of all materials, labour, T&P, royalty etc complete in all respect and as per direction of the Engineer-in-charge. |
| 21 | Supplying, Fitting, Fixing & Placing in position of POT-cum-PTFE Bearing including cost, conveyance of bearing & labour for fitting fixing etc complete as per approved Drawing & Technical Specifications and Section - 2000 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 22 | Providng and Laying of Strip Seal Expansion Joints catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer / Supplier or their authorized representative ensuring compliance to the manufacturer's instructions for insttalation. |
| 23 | Providing & laying Filter Media with crushed stone aggregates of 45mm size satisfying the requirements laid down in clause 2504.2.2 of MoRT&H specifications to a thickness not less than 600 mm with smaller size towards the soil and bigger size towords the wall and provided over the entire surface behind Abutment, wing wall and Return wall to the full height compacted to a firm condition complete as per drawing and technical Specifications. |
| 24 | Providing & erecting a \\"W\\" metal beam crash barrier comprising of 3mm thick corrugated steel metal beam rail, 70cm above road/ ground level fixed ISMC series channel vertical post 150 x 75 x 5 mm spaced 2m centre to centre, 1.8m high, 1.1m below ground / road level, all steel part & filments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150mm x 75mm x 5mm, 330mm long complete as per clause-811 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 25 | Gravel backing to aprons & revetments with good quality moorum / sand and moorum admixture satisfying Liquid limit below 25 and P.I. value within 6 as per approved drawing with cost, conveyence, royality, taxes of all materials, all labours, T&P sundries complete as per specifications and as per direction of Engineer-in-Charge. |
| 26 | Providing Weep Holes of 100mm dia using A.C./ PVC pipe, fixing with cement mortar including cost, conveyance, royality of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause -2700 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 27 | Providing & Fixing of Drainage Spouts in Deck slab with 100 mm diameter G.I Pipe complete for finished item of work as per approved Drawing & Technical Specifications as per section of 2700 of MoRT&H Specification for Road & Bridge works (4th Revision)and as per direction of Engineer-in-Charge. |
| 28 | Providing & fixing in position RCC Crash barrier monolithic with slab, edges of road, Approches to Bridge structure and median constructed with M-40 grade concrete with HYSD reinforcement confirming to IRC:21 and dowel bars 25mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board keyed to the structure end installed as per design given in the MOST circular No. RW/NH-33022/1/94-DO III dated 24th June, 1994 and as per dimensions in the approved drawing and at locations directed by the Engineer. |
| 29 | Providing and laying 25 mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in Table 500-29, prepared by using mastic cooker and laid to required level and slope after cooking the surface,including providing anti-skid surface with bitumen precoated fine grained hard stone chipping of 13.2 mm nominal size at the rate of 0.005 cum per 10 sqm and an approximate spacing of 10 cm center to center in both directio, pressed into surface when the temperature of surfaces is not less than 100° C, protruding 1 mm to 4 mm over mastic surface including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per Clause 515 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 30 | Providing and fixing 25mm thick bituminous expansion joint board in expansion joint of CD & structure work etc complete as per drawing and technical specification Clause No.2604 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 31 | Providing & laying Bituminous Concrete with 100-120 TPH batch type hot mix plant producing an avarage output of 75 tonnes as per hour using crushed agreegates of specified graded premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tendem rollars to achieve the desired compaction as per MoRT&H specification clause No. 509 complete in all respects and as per direction -in -charge. |
| 32 | Construction of Granular Sub-base by Providing Close graded Grading - VI materials as per table 400-2, mixing in a mechanical mix plant at OMC, Carriage of mixed Material to work site, Spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power rollar to achieve the desired density, complete as per clause No. 401 of MoRT&H specifications for Road and Bridge works (Latest Revision). |
| 33 | Providing, laying, spreading & compacting graded stone aggregate to wet mix macadam specification including premixing the material at OMC in mechanical mix plant, carriage of mixed material to site, laying in uniform layers on well prepared surface & compacting with vibratory rollar to achieve the desired density complete as per direction of Engineer-in-charge. |
| 34 | Providing and applying Primer Coat with Slow setting bitumen emulsion on prepared granular surface, spreading @ 0.60kg / sqm using mechanical means as per approved drawing and technical Specifications complete in all respect as per section 900, clause 501.5.2 & 502 of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost, conveyance of all materials, labour, T&P, Royality etc complete and as per direction of Engineer-in-charge. |
| 35 | Providing Tack coat with rapid setting bitumen emulsion on prepared bituminous/ Granular surface including Cleaning with Mechanical Broom and spraying bitumen emulsion using mechanical means, as per approved drawing and technical Specifications complete in all respect as per section 900, clause 501.5.2 & 503 of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost, conveyance of bitumen emulsion, labour, T&P, Royality etc complete and as per direction of Engineer-in-charge. |
| 36 | Providing & Laying 50mm thick Bituminous Macadam with 100-120 TPH hot mix plant producing an avarage output of 75 tonnes per hour using crushed agreegates of specified grading, Premixed with bituminous binder of 60/70 penetration grade of bitumen, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolled with smooth wheeled, vibratory and tendem rollars to achieve the desired compaction as per clause 507 of MoRT&H specifications for Road & Bridge works (5th Revision). |
| 37 | Providing & laying 25mm thick Semi Dence grade Bituminous Concrete with hot mix plant using crushed Agregate of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen, transporting the hot mix to work site, laying with a Hydrostatic Paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tendem rollars to achieve the desired compaction as per clause 508 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 38 | Rough stone dry packing on Aprons and Revetments with hard granite stone of above 30cm and above size including cost, conveyance, royality of all materials & labour Charges etc complete as per direction of Engineer-in-charge. |
| 39 | Providing & fixing RCC M-15 grade using 10mm to 12mm size chips for km stone and hectometer stone along with reinforcement for finished item of work as per drawing as per IRC-25/1967 & IRC-8-1980 fixed in position including finishing and lettering, painting as per approved drawing and technical specification complete in all respect as per Clause No. 805 & Section 800, 900, 1000, 1500, 1600, 1700 of MoRT&H specification for road & bridge works (5th Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. |
| 40 | Ordinary km stone |
| 41 | Hectometre (200mtr.) stone |
| 42 | Providing road marking with hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes etc. for finished item of work as per approved drawing and Technical Specification complete in all respect as per section 900 and clause - 803 of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost and Conveyence of all materials, labour, T&P, royality etc complete and as per direction of Engineer-in-charge. |
| 43 | Providing & fixing of RCC M-15 guard Post of 1.0m height and 15cm dia using 3.5kg steel reinforcement per each as per IRC:8-1980, fixing in position with painting & printing including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete Technical Specifications and Clause- 804 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 44 | Providing and fixing bi-directional rectro reflective raised pavement markers of approved colour, quality & make conforming to ASTM D-4280 made from injection moulded high impact polymer including cleaning , preparation of surface and fixing at position with approved quality adhesives including cost of all materials, labour, transportation, sundries, T&P etc complete as per Clause -804 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 45 | Providing & fixing typical information sign board as per specification and drawing. Three MS plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5mm size on back edges. The lower Plate will be welded with Iron frame of 25mm x 25mm x 5mm. The angle Iron frame of lower most plate and flat Iron frame of middle plate will be welded to 2 Nos. 75mm x 75mm x 12mm of SWG sheet tubes posts duly embeded in cement concrete M-15 grade blocks of 450 mm 450mm x 600mm, 600mm below ground level. The top most diamond plate will be weldedto middle plate by 47mm x 47mm x 12 mm of SWG steel plate tube. rAll M.S will be stove enamelled on both sides. Lettering and printing arrowes, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing and as per direction of Engineer-in-charge. |
| 46 | 80cm x 60cm rectangular (Facility Sign) |
| 47 | 60cm circular (Speed Limit sign) |
| 48 | 30 cm x 90 cm Rectriangular (Hazard Marking sign) |
| 49 | 50 cm x 60 cm Rectriangular (Chevron Sign) |
| 50 | Providing and fixing of direction and place Identification Signs up to 0.9 sqm. Size (1200mm x 700mm) Board retro-reflectorised, cautionary, mandatory and informatory sign as per IRC-67 made of high intensity grade sheeting vide clause 801.3 ,fixed over aluminium sheeting, 1.5mm thick supported on mild steel angle post 75m x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing . Please Enable Macros to View BoQ information |
