|
| 1 | Description |
| 2 | Supply and delivery of clear water vertical wet type 5 HP(Three phase) submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted 100 x 125 LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283/1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 % including fixing and jointing submersible cable with proper clamps upto the stater to required depth and also fixing of riser pipes to the required depth and testing the pumpset and trail run for ten days including cost of all materials labour charges, lead lift etc., complete |
| 3 | Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) for 3 phase 5 HP submersible pumpset with necessary Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor and cost of all materials labour charges, lead lift etc., complete. |
| 4 | Supplying and fixing in position of 110 mm OD PVC pipe heavy duty (6kg cm2) approved ISI make quality with necessary specials and fittings for water supply including cost of all materials earth work excavation refilling with excavated earth,labour lead lift etc.. Complete. |
| 5 | Supplying and fixing of ISI standard approved gun metal 100mm gate valve including cost of all materials and labour for fixing, lead, lift, etc. complete. |
| 6 | Supply and erection of 3 phase 5 HP monoblock pumpset with panel board suitable for 3 phase 5HP motor with necessary switches, fuses, starter, voltmeter, Ammeter, three pilot lamps, capacitor, single phasing preventor, laying and jointing the cable and proper earthing, and service connection etc. complete as instructed by the Engineer at site |
| 7 | Developing charges for Borewell with air compressor of 600CFM capacity including transportation, labour and fuel charges for compressor as directed by the site Engineer incharge and conducting yield test by 'V' notch method. |
| 8 | Supply fabrication and erection of steel supports necessary purlins and rafter for making necessary roofing arrangement using suitable MS angles materials including cost of all materials ,transport charges ,labour, lead ,lift painting two coats with enamel paint over priming coat etc., complete as instructed by the Engineer at site. |
| 9 | Supplying and fixing of approved Galvalume colour sheet for roof of the motor shed including cost of colour sheet self taping screws, nuts and other required materials ,transport charges ,all labour , lead, lift etc, complete as instructed by the Engineer at site . |
| 10 | Dismantling of existing RCC cement concrete road including cost of all materials for dismantling ,all labours ,lead lift ,cost of removal of debris etc.,complete. |
| 11 | Laying of RCC cement concrete ( In the dismantled portion) road 1:1.5:3 using 12 to 20 mm HBS metal including cost of all materials labour,lead, lift,form work, curing etc., complete but excluding cost of steel reinforcement. |
| 12 | Supplying and fixing of TMT reinforcement rods for the RCC cement road concrete works including cost of steel, binding wire, labour for fabrication,etc., complete. Please Enable Macros to View BoQ information |
