|
| 1 | Construction of Compound wall , Borewell and New Toilet at DRDA Office Building Campus in Pudukkottai District |
| 2 | Earth work excavation and depositing on bank with initial lead and lift in all clauses of soil such as hard stiff clay, hard gravelly soil as per SS 20 B for foundation. |
| 3 | Filling with M.sand including cost and conveyance of sand to work site including all labour charges for filling etc complete. |
| 4 | Cement Concrete 1:4:8 mix using 40mm HBG metal including cost and conveyance of all materials to site including all labour charges for filling etc complete. |
| 5 | PROVIDING FORM WORK CENTERING FOR SOFFITS of slab of plan surface including shuttering 3m high using MS sheets of size 15 x 25 x 3 mm laid over w.joints of size 10 x 6.50 cm spaced 75mm c/c complying with standard specification |
| 6 | Below |
| 7 | Above |
| 8 | Supplying and fabrication of steel rods including all cost and conveyance and all labour charges and all other incidental charges. |
| 9 | R.C.C 1:11/2:3 mix using 20mm ISS HBG metal including cost and conveyance and all labour charges etc.complete. |
| 10 | Brick work in following Cement Mortar using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification. |
| 11 | Plastering with cement mortor 1:5 mix 12mm thick including cost of conveyance of all materials to work site and all labour charges etc. complete. |
| 12 | Emulsion Painting the two coats with one coat of primer including cost and conveyance of all materials to work site and all labour charges etc., complete. |
| 13 | Towards providing Cement Mortar 1:2 for border line on outside of the building (roof top,windows curve,pillar work etc) including cost and conveyance and all other labour charges. |
| 14 | Supply and fixing of 35 mm x 6 mm plate with 12 mm square rod of MS grill to a size of 1.8 x 1.3 m including cost and conveyance of all materials to work site and all labour charges etc., complete. |
| 15 | Provision for SS Gate Arrangements |
| 16 | Provision for Name Board Arch |
| 17 | Provision for New Borewell |
| 18 | Conduction Geo Physical survey using scienfic instrument |
| 19 | Drilling of 150mm dia borewell in hard rock area anywhere in Pudukkottai District in the place shown by the Officers including transportation of rig and supporting vehicle from one place to another place including fuel, labour, etc., complete. |
| 20 | Loose soil |
| 21 | Hard Rock |
| 22 | Supply and delivery of following PVC casing pipes and specials with ISI Marking |
| 23 | Supply and delivery of the submersible pumpset 20Lpm x125m head of 1.50 HP including all charges |
| 24 | Supply and delivery following 1.50 Hp submersible pumpset control pannel board |
| 25 | Supply and delivery of 2.50 sqmm submersible cable for pumpset erection |
| 26 | Supply and delivery of HDPE Black Hose pipes and special confirming part - I for pumpset erection |
| 27 | 32mm HDPE Black Hose (M) |
| 28 | 50mm MS Clampset |
| 29 | 150mm MS Bore Cover |
| 30 | Provision for labour charges for Erection Pumpset |
| 31 | Provision for Water supply arrangement |
| 32 | Provision for Nylon Rope for Bore well |
| 33 | Provision of NEW Toilet |
| 34 | Earth work excavation and depositing on bank with initial lead and lift in cll clauses of soils such as as per S.S.20B for narrow foundation etc. complete. |
| 35 | Filling with M.Sand including cost and conveyance of all materials to site and all labour charges etc., complete. |
| 36 | Cement Concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges etc., complete. |
| 37 | Brick work with Cement Mortar 1:5 Mix using Fly Ask Bricks including cost and conveyance of all materials to site and all labour charges etc., complete. |
| 38 | Supplying and errecting Centering for sides and soffixs of all RCC works including cost and conveyance of all materials to site and all labour charges etc., complete. |
| 39 | Below |
| 40 | Above |
| 41 | Cost and supply of steel with fabrication charges including cost of steel and binding wire complete with standard specification etc., complete |
| 42 | R.C.C. 1:1½:3 mix using 20mm ISS HBG metal including cost and conveyance of all materials to work site and all labour charges etc., complete. |
| 43 | Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data) |
| 44 | Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. |
| 45 | Paving the Top of roof with Solar reflective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three M.Sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works) |
| 46 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly,etc., complete |
| 47 | Plastering with cement mortor 1:5 mix to 12mm thick including cost and conveyance of all materials to work site and all labour charges etc., complete |
| 48 | Supply and fixing of Door including cost and conveyance of all materials and all labour charges etc., complete. |
| 49 | Steel Door |
| 50 | Distembering two coats including cost of lime blue powder, fevicol type gums, brushes, scaffolding charges etc., complete with standard specification. |
| 51 | Emulsion Painting including cost of lime blue powder, fevicol type gums, brushes, scaffolding charges etc., complete with standard specification. |
| 52 | Painting in two coats using ready mixed enamel paint including all cost and labour charges etc., complete |
| 53 | Supply, delivery and fixing of HDPE Tank with ISI marking (2000 liter capacity) including transportation, fixing etc., complete |
| 54 | Provision for supply and fixing of Indian Water Closet |
| 55 | Provision for supply and fixing of EWC |
| 56 | Supply and fixing of 110mm dia Pipe for Sanitary Arrangeents etc., |
| 57 | 110mm dia PVC Pipe |
| 58 | 110mm dia PVC Door bend |
| 59 | 110mm dia PVC Tee |
| 60 | 25mm dia PVC Pipe |
| 61 | Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed Light point / fan point (Forelectronic Regulator) SD 25 |
| 62 | Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour forconcealed PVC plug point SD 38 |
| 63 | Supply and fixing of single box type Compact flourescent tube fitting with copper choke and condenser with TW round block on wall or ceiling with flourescent tube with PVC unsheathed copper leads from terminals to the fitting of CFL Light [SD 88 ] |
| 64 | Supply and run of 2 of 1.50 Sq.mm polythene insulated PVC sheathed heavy duty SC Copper conductor of 1100 V grade on 7/20 GI bearer wire for service connection mains (SD No.64) |
| 65 | Provision for Lettering the Name board |
| 66 | GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column \\"BB\\" for all works in this package}(Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD) Please Enable Macros to View BoQ information |
