|
| 1 | Civil works |
| 2 | Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m |
| 3 | Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres |
| 4 | Provinding & Laying Cement concrete 1:4:8 with stone ballast 40mm gauge mixing by mechanical means using concrete mixer volumetric type complete in all respect as per specification and to the entire satisfaction of engineer-in-charge |
| 5 | Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth complete in all respect as per specification and to the entire satisfaction of engineer-in-charge |
| 6 | Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure |
| 7 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) complete in all respect as per specification and to the entire satisfaction of engineer-in-charge |
| 8 | Centering and shuttering for columns (Square or rectangular or poly gonal in plain) complete in all respect as per specification and to the entire satisfaction of engineer-in-charge |
| 9 | Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.complete in all respect as per specification and to the entire satisfaction of engineer-in-charge |
| 10 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete in all respect as per specification and to the entire satisfaction of engineer-in-charge |
| 11 | First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth complete in all respect as per specification and to the entire satisfaction of engineer-in-charge |
| 12 | Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded complete in all respect as per specification and to the entire satisfaction of engineer-in-charge |
| 13 | Providing and laying in super structure for first storey factory made with vibro-hydraulic compaction machine precast Hollow block of cement concrete setting in position with cement mortar 1:3 (1 cement:3 course sand ) including cost of hoisting, centring and shuttering complete as per IS:2185 (Part-1): 2005. |
| 14 | 20mm thick cement plaster 1:4 in two coat work complete in all respect as per specification and to the entire satisfaction of engineer-in-charge |
| 15 | 12.5 mm thick cement plaster 1:4 complete in all respect as per specification and to the entire satisfaction of engineer-in-charge |
| 16 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish complete in all respect as per specification and to the entire satisfaction of engineer-in-charge |
| 17 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade |
| 18 | Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm complete in all respect as per specification and to the entire satisfaction of engineer-in-charge |
| 19 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade complete in all respect as per specification and to the entire satisfaction of engineer-in-charge |
| 20 | Dismantling brick work tile, masonry or tile lining in cement complete in all respect as per specification and to the entire satisfaction of engineer-in-charge |
| 21 | Dismantling Cement concrete plain1:2:4 mix |
| 22 | Credit of Brick bats |
| 23 | Credit of Old Bricks |
| 24 | Scraping of colour wash, white wash and old distemper etc. |
| 25 | Scrapping of Cement Plaster |
| 26 | Raking out joints in lime or cement mortar and preparing the surface for repointing or replastering including cost of neat coat of cement, disposal of rubbish to the dumping ground within 50m lead. |
| 27 | Renewing glass panes with putty and nails wherever necessary Glass panes weighing 10.75 Kg/sqm |
| 28 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. Complete I.S.I Designation No. III (size of door 851mm to 1000mm) |
| 29 | Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) size 595x595 mm |
| 30 | Providing and Fixing ceiling consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings,specifications and tothe entire satisfaction of engineer-in- charge. |
| 31 | Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material complete in all respect as per specification and to the entire satisfaction of engineer-in-charge |
| 32 | Conglomerate floor 40mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material |
| 33 | Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications and to the entire satisfaction of engineer-in-charge |
| 34 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibro- hydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge. IS COde : 15658 (2006) |
| 35 | Factory manufactured solid flush door fixed in position iron hinges, etc . (excluding the cost of any fittings other than specified above but including the labour for fxing the same in position a) comercial with elm or gujan facing on both/sides with laminated core and lipped edges. iv) 35mm thick. |
| 36 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt)For shutter area above 0.50 sqm |
| 37 | Providing and fixing 0.50mm thick Aluminium sheet including cost of necessary fittings, screws etc. |
| 38 | Providing and fixing Aluminium sliding bolts ISI marked anodized of size 300x16mm |
| 39 | Polished Granite stone flooring 18mm thick , as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete |
| 40 | Wire gauge fixed in steel window of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm thick width, fixed withmachinescrews, complete in all respect. |
| 41 | First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level complete in all respect as per specification and to the entire satisfaction of engineer-in-charge |
| 42 | Marble stone flooring with 12-15 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with: Udaipur Green Marble Tiles of thickness 12mm to 15mmSlabs sizes above 0.50 sqm |
| 43 | Providing and fixing commercial plywood 18mm thick |
| 44 | Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete. |
| 45 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. |
| 46 | Providing and fixing 18 gauge MS sheet cup board shutters Godrej type including handle and locking arrangements duly fixed at site Total Please Enable Macros to View BoQ information |
