|
| 1 | Excavation in foundations, trenches etc. in earth work,lift uoto 1.50 metres stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. Layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in lead of 20 metres. |
| 2 | Prov. and laying cement concrete 1:4:8(1cement: 4sand: 8 graded stone agg. 40mm nominal size) and curing complete excluding cost of form work i/c all leads and lifts. a) Foundation and plinth. |
| 3 | Proving & laying cement concrete 1:1.5:3 (1 cement :1.5 sand:3 graded stone aggrtegate 20mm dia) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in :- |
| 4 | Foundation and plinth |
| 5 | Walls (any thickness) but not less than 0.10 m thickness) attached pillasters, buttresses,plinth and string courses etc. from top of foundation level upto floor two level. |
| 6 | Providing and laying cement concrete work 1:2:4(1cement:2sand:4 graded stone agg. 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in |
| 7 | Suspended floors, roofs, landings,shelves and their supports balconies, beams, girders, bressumers and cantilevers upto floor two level. |
| 8 | Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two level. |
| 9 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, strutting , strutting and propping etc. with wooden, battens, and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs.and removal of the same for insitu reinforced concrete and plain concrete work including all leads and lifts in:- )Vertical surfaces such as soffits of suspended floors,roofs,landings and the like including attached pillasters,buttresses, plinth and string courses and the like. |
| 10 | Vertical surfaces such as soffits of suspended floors,roofs,landings and the like including attached pillasters,buttresses, plinth and string courses and the like. |
| 11 | Flat surfaces such as soffits of suspended floors,roofs, landings, and the like:-i)Floors etc. upto 200mm in thickness. |
| 12 | Prov., Laying & Jointing in trenches GMS tube (Light grade) tube fittings and jointed complete (earth work in trenches to be measured and paid for separately) and as per the diretion of Engineer-in-Charge. |
| 13 | 50 mm dia |
| 14 | Providing & Fixing 500 mm dia man hole cover with frame complete in all respect i/c all leads 7 lifts. |
| 15 | Providing and fixing brass Wheel valve of superior quality including fitting complete as per directions of the Engineer-in-Charge. |
| 16 | Providing & Fixing full way wheel Valve as per the Specification complete as per directions of the Engineer-in-Charge. 50 mm dia Please Enable Macros to View BoQ information |
