|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30 cm (thirty centimetre) in depth, 1.5 m ( one point five metre) in width as well as 10 sqm (ten square metre) on plan) including getting out and disposal of excavated earth upto all leads and lifts for all kinds of soil including chiseling of hard rocks where blasting is prohibited including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 2 | Stone soling properly hand-packed filling interstices with Kharanja stone and consolidating with power road roller to the requested gradient and comber including spreading watering and rolling of binding materials moorum or earth etcetera complete as per MORD technical specification. 100 mm ( one hundred millimetre) spread thickness (finished work including materials and labour) as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 3 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 4 | Providing and laying in position cement concrete 1:1½:3 (One Cement: One and half coarse sand : three graded/crushed stone aggregate 20 mm (Twenty millimetre) nominal size of specified grade for coping including the cost of centering and shuttering including entire carriage of materials within all leads and lifts as per the direction of Engineer-in-Charge. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax or other taxes imposed by the Government. |
| 5 | Steel reinforcement (TATA /SAIL / JINDAL PANTHER/ Shyam steel make) for reinforced cement concrete work including straightening, cutting, bending, placing in position and binding all complete work including cost of binding wire upto all floor level mild steel and medium tensile steel bars of grade Fe-500D (Five hundred) or more including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 6 | Providing and laying factory made 60mm (Sixty millimetre) thick cement concrete paver block of M-30 ( M-Thirty) grade with approved colour, design and pattern (NTC make ISI marked) chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etcetra of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over 50mm thick (fifty millimetre) compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 7 | Structural steel work in single section, (TATA/SAIL Make ) fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete In trusses and trussed purlins in building including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 8 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etcetera complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 9 | Finishing walls with Acrylic Smooth Exterior Paint of ASIAN- APEX ULTIMA of required shade on old work (One or more coat applied @ 1.67 ltr/10 sqm (at the rate of one point six seven litre per ten square metre) over and including priming coat of exterior primer applied @ 0.90 kg/sqm (at the rate two point two zero kilogram per ten square metre) complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 10 | 6mm (Six millimetres) cement plaster of mix cement mortar 1:3 ( One cement : three coarse sand) upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 11 | Providing and applying white Cement Based Putty of average thickness 1 mm ( one millimetre) of approved brand and manufacturer (J K White/ Birla White) over the plastered wall surface to prepare the surface even and smooth complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 12 | Providing and laying in position cement concrete of 1:2:4 (One cement : Two coarse sand) : four graded stone aggregate 20 mm (Twenty millimetre) nominal size for All work up to plinth level including the cost of centering and shuttering, including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 13 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as manufacturers specifications. Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (at the rate of zero point nine zero per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (at the rate of zero point eight zero per ten square metre) (ASIAN/NEROLAC/ICI-DULUX) of approved brand and manufacture including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 14 | Centering and shuttering including strutting, propping etcetera and removal of form work for Columns, piers, abutments, pillars, posts and struts including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 15 | Repair to plaster of thickness 12mm to 20mm (Twelve millimetre to twenty millimetre) in patches of area 2.50 sqm (Two point five zero square metre) and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground with cement mortar 1:4 (One cement : four fine sand) complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Please Enable Macros to View BoQ information |
