|
| 1 | Steel work welded in built up sections, trusses and framed work including cutting hoisting, fixing in position and applying a priming coat of lead paint in beans joints channels angles tees flats with connection plates or angle cleats as in main and cross beams, hip and jack rafters, purlins and connected to common rafters and the like as per specification. |
| 2 | Providing and fixing moulded hand rail of M.S. hollow pipe 50mm dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & |balusters of railings shall be mesaured & paid separetely including carriage of materials within all leads and lifts |
| 3 | Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil, grease,dirt and other foreign matter scoured with wire brushes fine steel wool scrapers and sand paper complete. Ready mixed priming paint brushing ref lead within all lead |
| 4 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied (@ 0.90 ltr/10 sqmn over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 5 | Half brick masonry in common burnt clay building bricks in super structure in cement mortar 1:4 (1 cement : 4 sand) 2nd class brick) upto all floor level with in all leads and lifts as per directions of Engineer in charge |
| 6 | 15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor twol level including arrises.internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6|(1cement : 6sand) within all leads and lifts as per satisfaction of Engineer in charges |
| 7 | Pl cement concrete 1:4:8 (1cement: 4sand: 8 graded stone agg 40 mm nominal size and curing complete excluding the cost of form work in plinth and foundatio |
| 8 | Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and |including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 9 | Providing and fixing 0.60mm th. Prepainted steel sheet in roofing with hot dipped metallic zinc coated sheetwith top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat polyster of 5microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks,bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete all accesories as required as per the direction of Engineer- IN- Charge |
| 10 | Providing and fixing PVC water tank of ISI:-12701 marked, G.I. inlet and outlet connection, 15 mm nominal bore ball valve and mosquito proof PVC outlet connection, 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level. ( make SINTEX having capacity of 1000 liters ) |
| 11 | Providing and fixing Plytheline-Aluminium-Polyehuylene (PE-AL-PE) composite pressure pipe U-V stabilized with carbon black conforming to IS-|15450-2004 water supply including clamp at onemeter spacing cutting fixing and making good the wall etc. including carriage of material in all leads and lifts. 15 mm nominal bore:-1216 |
| 12 | Providing and fixing composite end seal compression fittings as per IS-15450-|2004 including carriage of materials in all leads and lifts Equal Tees 1216 |
| 13 | educing Tees 1620 x all branches |
| 14 | Female branch Tee 1216x1216x15 mm thread |
| 15 | Female elbows 1216x15 mm thread |
| 16 | Male thread connector 1216x15 mm thread |
| 17 | Female thread connector 1216x15 mm thtread |
| 18 | couplers 1216 |
| 19 | Reducer 1620x1216 |
| 20 | Providing and fixing 40x3 mm flat iron holdfast 40 cm. long ilc fixing to frame with 10mm dia bolts& nts and wooden plugs and embeding in lcement concrete block 30x10x15 cm 1:3:6 ( 1cement: 3sand: 6graded stone aggregate 20 mm nominal size) |
| 21 | Earth work in rough excavation, banking excavated earth in layers not with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and lift upto 1.5 m : Please Enable Macros to View BoQ information |
