|
| 1 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes,shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. |
| 2 | Excavation for foundation in earth, soils of all types sand, gravel and soft murum,Including removing the excavated matreial upto a distance of 50 M beyond the building area stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling ,ramming, watering Including shoring and strutting etc.complete (Lift upto 1.50m ) SSR 2022-23 Page No.153 Item No. 21.02 |
| 3 | Excavation for foundation in earth, soils of all types sand, gravel and soft murum,Including removing the excavated matreial upto a distance of 50 M beyond the building area stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling ,ramming, watering Including shoring and strutting etc.complete ( Lift upto 1.50m to 3.0m ) SSR 2022-23 Page No.153 Item No. 21.04 |
| 4 | Providing and laying in situ M-20 cement concrete of trap/ granite / quartzite / gneiss metal with 15% plum of trap stones for foundation and bedding of retaining walls and jetty etc. including necessary formwork,compacting,curing,bailing out water manually in tidal range etc. complete. SSR 2022-23 Page No.326 Item No. 49.26 |
| 5 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc. complete.SSR 2022-23 Page No.157 Item No. 21.37 |
| 6 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. SSR 2022-23 Page No.157 Item No. 21.38 |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Page No.175 Item No. 24.04 |
| 8 | Providing and Laying in situ /Ready Mix cement concrete M-25 of trap /granite /quartzite /gneiss metal for R.C.C.work in foundations like raft,strip foundations,grillage and footings of R.C.C.column sand steel stanchions etc.including bailing out water,Steel centering formwork,laying /pumping cover blocks,compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel)etc.complete,with fully automatic microprocessor based PLCwith SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer)etc.complete.With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Page No.178 Item No. 25.13 |
| 9 | Providing and laying Cast in situ /Ready Mix cement concrete M-25 of trap /granite/quartzite/gneiss metal for R.C.C.columns as per detailed design sand drawing or as directed including steel centering,formwork,cover blocks,laying /pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finishis to be provided and curing etc.complete,(Excluding reinforcement and structural steel).with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.33 ,Page No.180 |
| 10 | Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete. SSR 2022-23 Page No.199 Item No. 28.01 |
| 11 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap /granite/quartzite/ gneissmetal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks,laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc.complete. ,(Excluding reinforcement and structural steel).with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.52,Page No.181 |
| 12 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steelcentering, formwork,coverblocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc.complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc.complete.With fine aggregate(Crushed sand VSI Grade) SSR 2022-23 Item No. 25.72,Page No.182 |
| 13 | Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C.pile caps, footings, foundations, slabs, beams columns, canopies, staircase,newels, chajjas,lintelspardis, copings,fins, archesetc.as per detail eddesigns, drawngs and schedules.including cutting, bending, hooking the bars,binding with wires or tack welding and supporting as required complete. SSR 2022-23 Page No.188 Item No.26.33 |
| 14 | Providing coursed rubble masonry first sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints on the inside when plastering is to be done, watering and scaffolding etc. complete.SSR 2022-23 Page No.200 Item No.28.12 |
| 15 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Page No. 177 Item No.24.16 |
| 16 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works.SSR 2022-23 Page No.299 Item No.46.42 |
| 17 | Providing Ashlar Fine Masonry of trap / granite stones in Cement mortar 1:3 with size of stone 0.60 m. x 0.45 m. x 0.23 m. in superstructure as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing mortar, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. NON SSR R.A. No11 |
| 18 | Providing Ashlar Arching of trap / granite stones in Cement mortar 1:3, with size of stone 60 cm. x 45 cm. x 30 cm. as per detailed specifications and drawings or as directed including the arch stones be of approved quality, colour, hard and free from defect of any kind, the arch stones in all cases of the entire thickness, the arch stones shall be dressed full and true to their proper shapes with the necessary summering, twist or winding and be set in fine mortar, the intrados, joints and beds to fair tooled and left full, the cast or keying course to be accurately fitted, at all horizontal joints the intrados to have a 2 cm. (¾″) chamfer, the face stone may be tooled or rock-faced with or without chamfer as directed, in arches up to 60 cm. (2ꞌ) in depth all stones shall be of the full thickness of the ring, arches to be built on proper centring, the bed joints shall be radial and the side joints shall be at right angles to the bed joints and the thickness of the joints shall not exceed 5 mm. (3/16″) preparing the mortar, cantering/scaffolding, watering and all arch work when handed over to be perfectly clean and free from all mortar stains etc. complete. NON SSR R.A. No125 |
| 19 | Providing Ashlar Fine Masonry of trap / granite stones for TADKHADA (BASESTONE) in Cement mortar 1:3 with average size of stone 0.40 m. x 0.40 m. x 0.60 m. in superstructure as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing mortar, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete For Stone curved shape chajja for Temple. NON SSR 11 |
| 20 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks incement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.SSR-2022-23 Item.No.27.01 |
| 21 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints,watering and scaffolding etc. Complete.SSR-2022-23 Item.No.27.05 |
| 22 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete.SSR-2022-23 Item.No.32.05 |
| 23 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.SSR-2022-23 Item.No.32.11 |
| 24 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc completeSSR-2022-23 Item.No.32.34 |
| 25 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc.complete.SSR-2022-23 Item.No.35.21 |
| 26 | Providing and Fixing Processed Stone Cladding on wall surface/plywood surface.RCC pardi/Wall and all type of Interior,Exterior Compound wall and Gate etc. of cladding processed stone with material of Processed clay,Wooden chips, Silica sand, Cement,GFRC admixtures,Colour pigments, Fiber up to thick of 230mm/ 25mm including scaffolding, fixing of screw, etc. (As directed by Engineer in Charge)SSR-2022-23 Item.No.51.192 |
| 27 | Providing and applying interior wall finish luster of approved make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applying wall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat or wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (With prior approval of S.E.)SSR-2022-23 Item.No.36.20 |
| 28 | Providing and laying in position flooring of telephone black /Amba White /Cat bary brown/Ruby red/Ocean Brown granite stone of approved shade and size18 mm to20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.SSR-2022-23 Item.No.33.34 |
| 29 | Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete SSR-2022-23 Item.No.33.35 |
| 30 | Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. SSR-2022-23 Item.No.23.04 |
| 31 | Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete SSR 2022 - 23 Item No.39.01 |
| 32 | Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete SSR 2022 - 23 Page No.246 Item No.39.08 |
| 33 | Providing and fixing First Quality Indian T.W Column of size 0.15 m x 0.15 m x 3.60 m for roofing/ floor including carving as per drawing or as directed and scaffolding if necessary etc. complete.It is mandatory to use first quality well seasoned Indian Teak Wood from Forest Department's FDCML.Including Carving Workas per detailed drawing or as directed |
| 34 | Providing and fixing Burma T.W Arches of size 3.00 m x 0.15 m x 0.381 m for roofing/ floor including including carving as per drawing or as directed and scaffolding if necessary etc. complete.It is mandatory to use first quality well seasoned Indian Teak Wood from Forest Department's FDCML Including Carving Work as per Detailed Drawing or As Directed |
| 35 | Providing and applying melamine polish of required finish to the wood work byspray machine including knotting and preparing the even surface by scraping,applying French polish , scaffolding if required etc. complete.Note:The work to be executed on prior approval of Superintending Engineer will be necessary. SSR 2022 - 23 Item No.34.09 |
| 36 | Providing and fixing Mangalore tiled roofing with class 'AA' tiles including securing thelast course of tiles near the eaves with steel flat 40 mm x 3 mm and 1.22 mm wire fixingcountry teak wood sloping battens of 25 x 12 mm teak wood horizontal battens of50mm x 25mm over the slopping battens, all iron work and coal tarring the battens etc.complete (Excluding ridge and hip tiles)SSR 2022 - 23 Item No.38.02 |
| 37 | Providing and fixing Mangalore tile ridge and hip tiles of class 'AA' including scaffolding if necessary, pointing with coloured cement mortar and curing etc. complete.SSR 2022 - 23 Item No.38.03 |
| 38 | Providing and fixing Country cut teakwood partly veneered and partly glazed partition with 75mmx 50mmframe at 60 cm center and 9mm thick commercial ply on both sides,decorative veneer of 4mm thick and plain glass 5mm thick, including French polishing etc.complete SSR 2022 - 23 Item No.39.70 |
| 39 | Providing and fixing Random Stone Paving, Second Sort in Cement mortar 1:1/2, with size of stone 0.45 m. x 0.60 m. x 0.15 m., as per detailed specifications and drawings or as directed including all stone slabs to of approved quality, hard, even, sound, durable and uniform thickness, the stones to be very finely chisel-dressed on the surface and the course to be of prescribed width, the joints running true, the stones to be laid with joints not exceeding 6 mm. (¼″) thick and to be evenly and firmly bedded flush in mortar on the concrete and no hollow left, side to be dressed true and as per shape at least half the depth from the face, preparing mortar, watering and all paving work when handed over to be perfectly clean and free from all mortar stains etc. complete. NON SSR R.A. No.149 |
| 40 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anti corrosive paint and two coats of oil painting complete.SSR 2022-23 Item no.40.01 |
| 41 | Waterproofing Treatment to new terrace by using Polymeric Cementitious Membrane as approved by Engineer in charge,followed by 112 mm thick brick bat coba covered with20 mm mortar finish.SSR 2022-23 Page No.423 Item No. 52.12 |
| 42 | Public Seating Chair. - 3 Seater Providing and Fixing 3seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish.SSR 2022-23 Page No.359 Item No.51.44 |
| 43 | Supplying and erecting Solar Street Light with PV Panel,Battery,Cable,Pole Non SSR |
| 44 | SITC of LED Post top Lantern/ Handi type 50 w BMC-R3-ME-4-29-a |
| 45 | Providing and fixing of retro-reflectorised informatory sign board rectangular / Square in shape having area less than 0.9 square meter made out of 2 mm luminum sheet bonded with white retroreflective sheeting of Class (Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive /heat activated adhesive retoreflective specified background, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25 mm x 25 mm x 3 mm duly painted on back side with two coats of grey stove enamel paint and supported on one Number mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paint having alternate black and white bands of 25 cm width including GI fixures and transportation etc. complete. The nutbolts of board with angle iron post / supporting structure after fixing at site has to be electrically welded. Class B (Type IV High intensity micro-prismatic grade heeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor / convert or issued for field erformance including the screen printed areas and cutout sheeting and cut-out durable transparent overlay film |
| 46 | Carrying of detailed topographic survey by using total station along the existing or new road including taking L-section and cross section at every 30 meter ROW ,taking at least 10 spot levels per cross section, picking up all existing details inside the Row like electric telephone line , encroachments, structures etc. connecting all the primary total station control points by G.I.S.Bench marks level or whichever available with department using auto level and preparing Auto CAD plan by using above data taking out 1 set of black and white printout on 50 micron polyster film sheet A2 size and 2 sets of coloured printout on A2 size submitting soft copy all data on CD. Plain Terrain New Alignment SSR 2022-23 Item No. 1.41 |
| 47 | Preparing and carrying out videography, Documentary & Shooting of still photographs of Extra copies - 5\\" X 7\\" Size outdoor and indoor of roads, bridges, other structures and programme, including preliminarys survey, still shots moving shooting, necessary board for video shooting hiring of vehicle, equipment for video shooting, transportation of all equipment, persons, required for shooting, lighting arrangement as may be necessary, editing, mixing, titling, lettering, sounding including cost of coloured cassette of approved quality etc. complete |
| 48 | GARDEN SOIL: -Supplying on site garden soil well sieved 80 % to pass through I.S. sieve of 10 mm size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The color of the soil generally is red. The soil will be measured by measuring box. (Farma) Item includes Transporting, loading -unloading etc. (Lead charges per 15 km. considered. Excluding Royalty) |
| 49 | FARM YARD MANURE: -Supplying on site well decayed, well dried, well powdered, without clods and free from stones, dried grass and other rubbish material. The color of the manure generally is black. The manure will be measured by measuring box. (Farma) Item includes Transporting, loading -unloading etc ( Lead charges per 10 km. considered. |
| 50 | Excavation for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed in earth, soil of all types, soft murum, including removing the excavated material up to a distance of 50 mtrs. for a depth of 30 cms. |
| 51 | Excavation pit size 1.00 x1.00 x 1.00m for planting large flowering/ shady trees (plant height 2 to 4 mtr.)/ palm varieties of height (plant height 2 to 4 mtr.) in earth, soil of all types, soft murum, including removing the excavated & unwanted material up to a required distance of 50 mtrs. |
| 52 | Refilling fresh garden soil / silt & manure in excavated area of depth 30cms. (1/10 of unskilled labour) |
| 53 | Filling fresh garden soil / silt & manure in excavated pit size area of 1.00 x 1.00 x 1.00m (1/10 of unskilled labour) |
| 54 | Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting reqired plant species, lawn grass as directed etc. complete for required depth 5 to 30 cms. for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed/ ground cover. (1/10 of semiskilled labour) |
| 55 | Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting reqired plant species as directed etc. complete for required pit size 1.00 x 1.00 x 1.00m. (1/10 of semiskilled labour) |
| 56 | Foliage Shrubs (Nerium) Specification:- Well Developed ,Fresh, Healthy bright Colour Leaves ,free from pest and diseases |
| 57 | Foliage Shrubs (Duranta Golden) Specification:- Well Developed ,Fresh, Healthy bright Colour Leaves ,free from pest and diseases |
| 58 | Flowering Shrubs (Mogara/Jasminum) Specification:- Well Developed ,Fresh, ealthy half in bloom, free from pest and diseases. |
| 59 | Flowering Shrubs (Ratrani/Night queen) Specification:- Well Developed ,Fresh, Healthy half in bloom, free from pest and diseases. |
| 60 | Lawn Grasses Mexican or Korian Grass Turf , Selection No.1 with garden soil 50 to 60 mm thickness. ,At time of handling over lawn/turf should be levelled dressed grass at site fresh and free from weeds ,pest & diseases. (Mexican or Korian Grass Turf , Selection No.1 American blue grass, / Barmuda etc ready to fix lawn turf in Slabs/ Rolls of required variety as directed Rates Including breakage,& Transportation Damage losses) |
| 61 | Flowering Trees (Bakul) Specification:- Minimum Girth 10m to 15 c.m. Clear trunk , with Maximum number of Leaves , well Developed CanopyFree from pest and diseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged. (Height above 3 m) |
| 62 | Flowering Trees (Kadamb) Specification:- Minimum Girth 10m to 15 c.m. Clear trunk , with Maximum number of Leaves , well Developed CanopyFree from pest and diseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged. (Height above 3 m) |
| 63 | Flowering Trees (Kaduneem) Specification:- Minimum Girth 10m to 15 c.m. Clear trunk , with Maximum number of Leaves , well Developed CanopyFree from pest and diseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged. (Height above 3 m) Please Enable Macros to View BoQ information |
