|
| 1 | Emergency maintenance of gear box |
| 2 | OD41295/2025-2026:Clearing grass from banks of canal and removal of silt, zoological waste and other debris from canal shutter and grooves including removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 3 | OD41297/2025-2026:Dismantling of the Hoisting Unit and stacking within a distance of 100 meter including hire ofmachinery, labour etc. complete as directed by the departmental officer at the site. |
| 4 | OD41296/2025-2026:Bend checking and correction of EN-8, 63mm OD screw rod, including cost of all labour, conveyance all lead and lifts etc.complete. |
| 5 | OD47/2025-2026:Supply of Thrust roller bearing-51220 [I.D.100/O.D.150/THK.38] (SKF or equivalent ) |
| 6 | OD48/2025-2026:supply of self aligning ball Bearing-1207 [I.D.35/O.D.72/Width.17] (SKF or equivalent ) |
| 7 | OD53/2025-2026:Overhauling and Refitting worm wheel assembly and worm shaft with already supplied bearings along with screw shaft as per the directions of dept officers at site. |
| 8 | OD41318/2025-2026:Erection of of the Hoisting unit of the shutter with proper alignment including cost of all machinery, labour etc. complete as directed by the departmental officer at the site. |
| 9 | 85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site |
| 10 | 85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site |
| 11 | OD41316/2025-2026:Trial run of the shutter after completing all the works as per the direction of departmental officer at site. |
| 12 | 85.118:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings |
| 13 | 85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing |
| 14 | Overhauling and painting of head regulator for Palakkuzha distributory at Pandappilly |
| 15 | OD41365/2025-2026:Clearing grass from banks of canal and removal of silt, zoological waste and other debris from canal shutter and grooves including removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 16 | OD41354/2025-2026:Dismantling of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Unit / Embeded parts etc. of the same and stacking at a distance of 100 meter including hire of machinery labour etc. complete as directed by the departmental officer at the site. |
| 17 | OD41362/2025-2026:Overhauling of gearbox and locking arrangement for shutters including oiling the gear teeth , replacing of thrust , taper roller bearing and oil seal, greasing etc. complete as directed by the Departmental officials at site. Cost includes cost of all materials and labour complete. |
| 18 | OD41370/2025-2026:Erection of of the Hoisting unit of the shutter with proper alignment including cost of all machinery, labour etc. complete as directed by the departmental officer at the site. |
| 19 | 85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site |
| 20 | 85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site |
| 21 | OD41366/2025-2026:Trial run of the shutter after completing all the works as per the direction of departmental officer at site. Please Enable Macros to View BoQ information |
