|
| 1 | Road WorkClearing and grubbing road land including uprooting wild vegetation, grass, bushes,shrubs,saplings and trees of girth upto 300mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be use do auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201.(I) By manual meansA) In area of non thorny jungle |
| 2 | Construction of Embankment with Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with a lift upto 1. 5m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto p g q p1000 m as per Technical Specification Clause 301.5(i) Private Land |
| 3 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.(i) Private Land |
| 4 | Construction of granular sub-base by providing well graded material,spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.By Mix in Place Method(ii) For Grading II Material |
| 5 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, handpacking rolling with smooth wheel roller 80-100 kN in stages to proper hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber,applying and brooming, stone screening / binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405.(A) By Manual MeansIII WBM Grading 3 |
| 6 | Construction of Shoulders as per Technical Specification Clause 407. |
| 7 | (A). Interlocking pavement blockProviding and laying interlocking concrete block pavement with M40 grade grade of concrete blocks having thickness 80 mm as per technical specification clause 1504 complete including carriage (a) Including Edge block/ Edge restraints |
| 8 | Traffic Signs(A) Retro-reflectorised Traffic SignsProviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below groundlevel as per drawings and Technical Specification Clause 801(ii) 600mm equilateral triangle |
| 9 | Traffic Signs(A) Retro-reflectorised Traffic SignsProviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below groundlevel as per drawings and Technical Specification Clause 801(iii) 600 mm circular |
| 10 | Traffic Signs(A) Retro-reflectorised Traffic SignsProviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below groundlevel as per drawings and Technical Specification Clause 801(iv) 800mm x 600mm rectangular |
| 11 | Traffic Signs(A) Retro-reflectorised Traffic SignsProviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below groundlevel as per drawings and Technical Specification Clause 801(vi) 600mm x 600mm square |
| 12 | Kilometre StoneReinforced cement concrete M15 grade kilometre stone / localstone of standard design as per IRC:8 fixing in position including painting and printing ,etc as per drawing and Technical Specification Clause 1703(ii) Ordinary Kilometer Stone (Precast) (iii) 200 m stone (precast) |
| 13 | Kilometre StoneReinforced cement concrete M15 grade kilometre stone / localstone of standard design as per IRC:8 fixing in position including painting and printing ,etc as per drawing and Technical Specification Clause 1703(iii) 200 m stone (precast) |
| 14 | Road Markers/Road Stud with Lens Reflector Providing and fixing of road stud 100 x 100 mm diecast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973 |
| 15 | Direction and Place Identification signs with size more than 0.9 sqm size board(A) Retro-reflectorised Traffic SignsProviding and erecting direction and place identification retro- \ reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting , 2 mm thick with area exceeding 0.9 sqm supported on mildsteel angle iron posts 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M-15 gradecement concrete 450 mm x 450 mm x 600 mm, 600 mm below groundlevel as per approved drawing and Technical Specification Clause 1701 |
| 16 | Providing and Fixing 'Logo' of PMGSY Project Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25 mm x 5 m size on back on edges. The lower plate will bewelded with MS angle iron frame of 25 mm x 25 mm x 5 mm.The angle iron frame of the lower most plate and flat iron frame of middle plate will bewelded to 2 nos.75 mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450 mm x 450 mm x 600 mm, 600 mm below groundlevel. The top most diamond plate will be welded to middle plate by 47 mm x 47 mm of 12 SWG steel plate tube. AllM.S. will bestove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause1701 and Annexure 1700.1 |
| 17 | RCC Guard Post: Supplying, fitting and fixing RCC guard post 150cm long erected 75cm above the ground and 75cm below the ground with M-15 grade (nominal mix 1:2:4 with broken stone aggregate up to 20mm size) of cement concrete and required reinforcement tied in position with annealed black wire including centering, moulding the top, curing including painting concrete surfaces in 23cm strips upto 0.75m from the top alternately in black and white and having 2 nos. reflective band of desired shade etc. complete as per design and as directed.(b) 15 cm dia. RCC guard post with reinforcement of 4nos. 12mm dia TMT main steel bars and 6mm TMT/ MS stirrups at 15cm c/c. |
| 18 | Planting of Trees and their Maintenance for three Year (Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge mannure, planting the saplings, backfilling the trenches, watering , fixing the tree guatrd and maintaining the plants for three year. |
| 19 | Provisions for Speed Breaker |
| 20 | Utility Shifting (L/S) Please Enable Macros to View BoQ information |
