|
| 1 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift up to 1.5 m.All kind of soil. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. |
| 3 | Providing and laying in position cement concrete of specified grade cost of centring and shuttering - -All work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 5 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns etc for mass concrete. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 11 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 12 | 15 mm cement plaster on the rough side of single or half brick wall of mix1:6 (1 cement: 6 fine sand) |
| 13 | Finishing walls with water proofing cement paint of required shade :New work (Two or more coat applied @ 3.84 kg/ 10 sqm). |
| 14 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shadeTwo or more coats on new work |
| 15 | Excavation in soil in Hilly Area by mechanical means Without useinng Dozer including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per Technical Specification Clause 1603.1 |
| 16 | Random Rubble Stone Masonry laid in1:6 cement and sand mortar, in breast walls,retaining walls, parapets, scuppers,etc. including supply of all material, labour, T&Pand royaltiies etc. complete as per drawingand technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction |
| 17 | Providing concrete for plain/ reinforced concrete i open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C. grade M 20 Nominal mix 1:2:4 (Hand mixed) |
| 18 | Entrance Gate – Making and installation of designer FR WR gate of antique architecture (15.00 × 12.50). Gate will be made in clay by a molding artist after which dye will be casted of it then further FRP pieces will be obtained which are further sanded down to perfection. Highly outside durable deco paint to be painted on it with sealer, epoxy and high matte to give the gate an antique finishing look. High gloss protection film/coating on top layer of paint to protect the paint from dust debris and any other external factors such as sunlight which may dull the color of the antique. Transportation, installation with proper iron welding fitment and grouting of the gate with frame work making inside with MS iron pipe for proper structure and design (opening will not be deducted). |
| 19 | Supplying and fixing of FRP made animal dustbins of height 3 ft to 4 ft. |
| 20 | Supplying and laying of Cobble stone of size 10x10 cm in 1:6 c/sand mortar including all cost complete. |
| 21 | Making and installation of ‘Wing’s Selfie Point’ in FRP (8ft height) with steps. Wings will be made in clay first by a clay moulding artist after which dye will casted and entire piece will be taken out then further sanding and finishing will be done after which iron MS structure will be installed inside with painting and PU to be done at last. We will charge |
| 22 | Providing and fixing Elephant shaped slide made of FRP of approved make and design, with smooth moulded finish, including ladder with anti-skid steps, side safety panels, handrails, necessary MS/FRP support structure, proper anchoring in concrete foundation, all nuts, bolts, and fasteners, complete in all respects. 8 x 12 |
| 23 | Providing and installation of Zipline play equipment of approved make and design, consisting of heavy-duty galvanized steel cable, trolley with stainless steel bearings, anti-slip handle, starting platform with ladder, end stop with spring braking system, MS support posts properly anchored in concrete foundations, all connectors, clamps, and safety fittings, complete with necessary painting/coating, testing, and commissioning, ensuring safe and smooth operation. |
| 24 | Providing and installation of Multi-play Station for kids park of approved make and design, comprising combination play equipment such as slides, climbers, ladders, platforms, tunnels, panels, and connecting bridges made of GELCOAT-FR-FRP and WR matt components with MS structure, anti-skid platforms, safety railings, and rounded edges, properly anchored in concrete foundations with all nuts, bolts, clamps, and fasteners, finished with non-toxic, weather-resistant coating, inbuilt color complete with all accessories, safety features, testing, and commissioning, in all respects as per manufacturer’s specifications. |
| 25 | Supplying & laying of carpet grass Mexican including dressing, levelling of existing ground with manure and complete in all respect. |
| 26 | Supply & Fixing Unbranded Tyre Climber Made of 12 gauge circular Tubular pipe using old tyres, including painting in different colour. Please Enable Macros to View BoQ information |
