|
| 1 | Excavation in trenches not exc 1.5 M wide and not exc 1.5m in depth for pipe line, etc. in soft/ loose soil getting out and levelling of bottom surface to required level complete all as specified and as directed. |
| 2 | Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick soft / loose soil complete all as specified and as directed. |
| 3 | Removing excavated material (Soils) from site to a distance not exc 50m away and depositing where directed at a level n.exc 1.5mtr above the starting point complete all as specified and as directed. |
| 4 | Boring holes under road pavement by bocky manually in any type of soil upto 150mm bore complete all as specified and as directed. |
| 5 | Supply and laying 3 layer (Polypropylene random copolymer) concealed pipes PP-R pipes PN 10/ SDR 11) stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply all PP-R plain and brass threaded polypropylene random fitting in trenches/wall/celling or laying in floors complete of following sizes including all fittings with and including taking down old unserviceable any size of pipe complete all as specified and as directed.Note:- Excavation & earth work shall be measured & paid for separately. |
| 6 | 25 mm size outer dia |
| 7 | 32 mm bore outer dia |
| 8 | 50 mm bore outer dia |
| 9 | 75 mm bore outer dia |
| 10 | 90 mm bore outer dia |
| 11 | Supply and lay in replacement of MS Pipes heavy grade (C) class with all fittings laid in floors, trenches or fixed to walls and ceilings including welding as required at site and removing old unserviceable pipe of following bore complete all as specified and as directed.Note:- Rate quoted shall deemed to be included for MS flanges and flange joints. |
| 12 | 50mm dia bore |
| 13 | 80 mm dia bore |
| 14 | 100 mm dia bore |
| 15 | M & L for fabrication of base frame with MS Channel MC-25/ 50/ 75/ 100/ 125 for foundation of centrifugal pump set/ steps/ General Frame work at STP including one coat of red oxide and two coat of black enamel paint and including taking out of old base frame and grouting new one existing with all nuts and bolts complete all as specified and as directed. |
| 16 | M & L for painting on steel and iron surfaces of size upto 150 mm dia with one coat of synthetic enamel paint as per existing colour scheme or pattern or as per standard including preparation of old painted surface of any description over 10cm in width or girth complete all as specified and as directed. |
| 17 | Supplying, laying, jointing, testing and commissioning of DI Pipe of size 100 mm dia as per IS 8329/2000 ISI marked, class K-7 with inside cement mortar lining with spigot and socket ends laid in trenches including taking down old unserviceable any type of pipe line complete all as specified and as directed.Note:- Earth work and Joints shall be measured and paid separately |
| 18 | M & L for DI fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars, tail pieces, caps and plugs of 100 mm dia bore confirming to IS: 9523 complete all as specified and as directed. |
| 19 | Earthing complete with galvanised steel earth plate electrode 600x600x6mm buried directly in ground not less than 2.25 mtr deep below normal ground level with top edge of earth plate not less than 1.5mtr below normal ground level connected to the Galvanised iron strip 32x6mm size by means of bolts ,nuts,check nuts and washers of galvanised iron and 32x6mm GI strip proceed by provision of GI light grade pipe 40 mm bore including provision of concrete pit in PCC 1:2:4 type B-1, using 20 mm graded stone aggregates with 40 mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kgs /Sqm and 6mm dia bar handle, excavation and earth work in any type of soil, charcoal dust and salt light grade GI watering pipe 20 mm bore with funnel and wire mash and medium grade GI protection pipe 15mm bore 5 Mtr long and GI strip upto main earthing of pole complete all as shown in electrical plate No.3 of MES Such 2009 Part-I complete all as specified and as directed. |
| 20 | S & F in replacement of flexible suction hose pipe heavy duty ISI marked of size 65mm outer dia complete all as specified and as directed. |
| 21 | S & F in replacement of flexible suction hose pipe heavy duty ISI marked of size 90mm outer dia complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 22 | S & F in replacement of flexible suction hose pipe heavy duty ISI marked of size 90mm outer dia complete all as specified and as directed. Please Enable Macros to View BoQ information |
