|
| 1 | Scarifying or picking gravelled macadam or bituminous macadam surface in area not exceeding 400sqm and depth exceeding 50mm but not exceeding 100mm deep complete all as specified and directed. |
| 2 | Materials and labour for 7.5cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size) of granite, trap or basalt, spread, rolled and consolidated to required gradient and camber required with 8 to 2 tonne capacity power roller all as specified and directed. |
| 3 | Preparation of unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags or compressed air to remove all loose, dirt, etc. complete all as specified and directed. |
| 4 | Material and labour for repairs to potholes, any depth, not exceeding 1.00 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads etc cutting around edges to at least 25mm in depth and making good by filling in screened & graded road metal, watering and well ramming (including supply of screened & graded road metal), complete all as specified and as directed. |
| 5 | Material and labour for applying evenly a priming/tack coat with bituminous primer @ 10 Kg per 10 Sqm (VG-10) on unsurfaced water bound macadam complete all as specified and directed. |
| 6 | Material and labour for preparation of existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags or compressed air to remove all loose, dirt, etc. complete all as specified and directed. |
| 7 | Material and labour for applying evenly a priming/tack coat with bituminous primer (VG-10) @ 5 Kg per 10 Sqm on existing black top surfaces / bituminous carpet surfaces complete all as specified and directed. |
| 8 | Material and labour for providing bituminous premixed asphaltic dense concrete using Paving bitumen any penetration, 40mm consolidated thickness with 5.5% binder content (using paving bitumen VG-30) by weight of total mix, laid using Mechanical paver, rolled and compacted to required camber and gradient, using 8 to 12 ton capacity power roller complete all as specified and directed. |
| 9 | Material and labour for providing premix bituminous macadam laid/rolled and compacted to required gradient and camber using 8 to 10 tone capacity power roller (consolidated thickness 75mm or less) using paving bitumen (VG 30 Grade) @ 4% by weight of total mix complete all as specified and directed. |
| 10 | Material and labour for painting lines, dashes, arrows, letters, etc. by applying 2.5 mm thick thermoplastic road marking compound of white/ yellow of approved make and shade for road marking, exceeding 10cm width on bituminous roads/ pavements or on cement concrete surfaces using Hot Processor Plant complete all as specified and directed. |
| 11 | Supply and fixing in repairs SOLAR CAT EYE/ SOLAR ROAD STUDS of minimum size 13.5 x10.5 x 2.5 cm made from aluminium alloy shell, 100% water proof design according to IP67, unbreakable polycarbonate clear facing, designed for maintenance free operation, fitted with High Effeciency mono-crystalline solar panel 2.4 V/0.3 Watt with one high capacity Ni-mH or Ni-Cd rechargeable battery(1.2V/1600MA) and provided with 06 (six) superbright LEDs of 10000 to 18000 mcd (Millicandela) Red / Green colour, Flash rate - 2 Hz approximately, Bearable weight - 10 Tons approximately, working time (backup) - 3 to 4 day after fully charged battery with charging time of 5-6 hours from direct sun light and automatically turns on at night and turns off at dawn facility all as specified and directed . MAKE : 3M/AVERY DENNISON/VARGO/DARK EYE. |
| 12 | Supply and fix in repair CAT EYE/pavement marker of size 11.5x7x1.6 cms made out of acrylic strene-acrylonitie of hi-impact polystrene fitted with moulded metheacrylate (MNC) reflector cube corner reflector design, fitted with tightly adhering poofing compound as per ASTDM-4280 provided with bituminous adhesive in sufficient quantity with each unit sos fixing with two shank reflector on both face (Coefficient of laminaiton as per specification and compressive strength 13 tones at 223 degree centigrade etc), Double side lenses complete all as specified and as directed. MAKE : 3M/AVERY DENNISON/VARGO/DARK EYE. |
| 13 | Supply and fixing in repair MS delinators SVD-3, 1200mm long 75mm dia MS pipe medium grade with hip 75mm around three strip of 50mm wide (each strip) and with mesh with yellow, green, red hi retro reflective tape, complete all as specified and directed.Note: The rate quoted is deemed to include for excavation and PCC 1:2:4 type B2 of size (300x300x600mm) |
| 14 | Supply and fixing in repair convex mirror of 120 cm dia with MS pole of 80 mm dia medium grade of length 2.00 mtr fixed with cleats and hooks including necessary nuts, bolts and washers, pole embedded in post holes including providing post holes of size 400mm x 400mm x 60 mm and embedding poles in post holes with and including PCC 1:2:4, type B1 using 20 mm graded aggregates including necessary excavation and earthwork and removal of surplus soil to distance n.exc 50 mtrs complete all as specified and as directed. MAKE : 3M/AVERY DENNISON/VARGO/DARK EYE. |
| 15 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing the demolished material outside MD land or at location directed by Engr-in-Charge complete all as specified and as directed. |
| 16 | Material and labour for 100mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in floor/ sub-base/ path/ hardstanding and finishing the surface even and fair to receive floor finish over it complete all as specified and directed. |
| 17 | Supply and fixing Machine pressed precast concrete interlocking rubber moulded paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade including dismantling of existing damaged tiles and removing away from site, paver blocks laid over bedding layer of sand complete all as specified and directed.Note: Bedding layer of sand will be measured and paid separately. |
| 18 | Material and labour for laying 50mm thick sand as bedding layer for Machine pressed precast concrete interlocking rubber moulded paver block including watering and consolidation complete all as specified and directed. |
| 19 | Supply and fixing in repairs speed pump of ABS material with two high reflective reflectors moulded in PMMA material welded with ABS base plate through ultrasonic welding process and fixed on to the speed bump size of speed pump is 495mm x 420mm x 70mm complete all as specified and directed . MAKE : 3M/AVERY DENNISON/VARGO/DARK EYE. Please Enable Macros to View BoQ information |
