|
| 1 | Excavation in trenches, getting out in hard/dense soil not exceeding 1.5m deep and not exc 1.5m wide for taking out and laying the existing cable .GI pipes etc. any size at places complete all as specified and directed. |
| 2 | Removing of surplus soil to a distance not exceeding 50 mtr complete all as specified and deposited where directed at a level not exceeding 1.5m above the starting point all as specified. |
| 3 | Returning filing in including spreading levelling, watering & well ramming in layers not exceeding 25 Cm thick all as specified. |
| 4 | Taking up/down GI/DI pipe and connection from trenches incl connected fittings/accessories complete of following sizes for re use of serviceable pipes and removing the U/S pipes from site for taking credit |
| 5 | 40mm bore |
| 6 | 25mm bore |
| 7 | 20mm bore |
| 8 | Supply, laying & testing GI pipe medium grade in trenches ISI marked with all fittings complete all as specified for following sizes. |
| 9 | 40mm bore |
| 10 | 25mm bore |
| 11 | 20mm bore |
| 12 | S & F in repairs of PVC float valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of 20mm bore complete all as specified and directed by Engineer-in-Charge. |
| 13 | Material and labour for brick masonry valve pit nominal size 60 cm x 60 cm x 60 cm with one brick thick wall using precast cement block of size 20cmx10cmx10cm brick in cement mortar 1:6 over 20 cm thick PCC plate form with 15 cm off set on every side of 1:3:6 type C-1 including plastering of internal surfaces and exposed surfaces with 15 mm thick plastering in cement mortarf 1:4 and 50- mm thick RCC cover (in two equal parts 1:2:4) type B-1 with 10 mm dia deformed bars at 10 cm interval on both side including necessary form work with 150 mm dia hole in the center complete all as specified and as directed by Engineer-in-Charged |
| 14 | S & F in repairs of gun metal gate valve ISI marked with iron wheel screwed down high pressure screwed both ends for iron pipe of size 40 mm bre complete all as specified and directed by Engineer-in-Charge. |
| 15 | All as per above serial item No 14 but here in before but 25mm bore |
| 16 | All as per above serial item No 14 but here in before but 20mm bore |
| 17 | All as per above serial item No 14 but here in before but 50 mm bore |
| 18 | M& L for rewinding submersible pump of capacity up to 7.5 HP with existing size wire with copper conductor of standard size including Varnish insulation paper and soldering of connection etc. Assembly of motor with pump set with necessary studs, bolts, washer etc complete with all connection all as specified and as directed by Engr-in-Charge. Note:- item rate includes transporation of motor from site to workshop and back. |
| 19 | M& L for rewinding submersible pump of capacity up to 1.5 to 5 HP with existing size wire with copper conductor of standard size including Varnish insulation paper and soldering of connection etc. Assembly of motor with pump set with necessary studs, bolts, washer etc complete with all connection all as specified and as directed by Engr-in-Charge. Note:- item rate includes transporation of motor from site to workshop and back. |
| 20 | M& L for rewinding submersible pump of capacity up to 12.5 to 15 HP with existing size wire with copper conductor of standard size including Varnish insulation paper and soldering of connection etc. Assembly of motor with pump set with necessary studs, bolts, washer etc complete with all connection all as specified and as directed by Engr-in-Charge Note:- item rate includes transporation of motor from site to workshop and back. |
| 21 | M&L for lifting of submersible pump motor set of 7.5 HP to 15 HP capacity including dismantling MS column pipe, steel wire rope from the bore well upto a depth of 90 mtr and Re-installations the same pump and motor set in the bore well in the same position alongwith all necessary work like fixing of column pipe, connections of rope with U clamps, connection to the discharge line, dry revolution test etc complete all as specified and directed.Note:- item rate includes transporation of motor from site to workshop and back. |
| 22 | Supply and fix in replacement of submersible flat .black pvc cable of size 6 sqmm,3 core un-sheathed copper conductor as per IS 694.complete all as specified and directed |
| 23 | Supplying and laying in replacement of synthetic Rubber insulated mat 2 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m complete all as specified and directed |
| 24 | S&F in repair star -delta Starter for capacity 12.5HP to15 HP centrifugal motor of , 415 volts, 50 HZ 3 Phase incl the necessary wiring connection to the pump complete all as specified and directed. |
| 25 | S&F in repair star -delta Starter for capacity 7.5 HP sumbersible pump of , 415 volts, 50 HZ 3 Phasencl the necessary wiring connection to the pump complete all as specified and directed. |
| 26 | S&F in repair DOL Starter for capacity 1.5HP to 5 HP sumbersible pump of , 415 volts, 50 HZ 3 Phase ncl the necessary wiring connection to the pump complete all as specified and directed. |
| 27 | S&F in repair 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) of 20mm bore UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches/ wall/ floor complete all as spd and directed.Note :- All connceted fittings like elbow,tee,reducer coupler will be count in RM |
| 28 | All as per item No. 27 above but size of pipe 25 mm bore |
| 29 | All as per item No. 27 above but size of pipe 32 mm bore |
| 30 | S& F in repair 3 layer PPR gate valve 20mm bore complete all as spd and directed. |
| 31 | All as per ser item No.30 here -in-before but 25 mm dia |
| 32 | All as per ser item No.30 here -in-before but 32 mm dia |
| 33 | M & L for Making connection of PP-R distribution branch with PP-R main of following sizes by providing and fixing tee including cutting and making fusion joint of size 16 to 40 mm etc. |
| 34 | Supply and fix in repair of heating element of capacity 2 KW with capillary thermostat 7\\" adjustable upto 70 degree celcius cut-off ,20A/220 volts for the sintex water tank incl plumbing wks complete all as specified and directed. |
| 35 | Supply and fixing in repair of heat tracing cable ( self regulating) 14 AWG nickel plated copper bus conductor for PPR pipe rated ouput wattage at -10 to 5 degree 30 w/m at 220 V complete all as specified and directed. |
| 36 | Supply and fixing in repair of heat tracing cable ( self regulating) 14 AWG nickel plated copper bus conductor for GI pipe rated ouput wattage at -10 to 5 degree 30 w/m at 220 V complete all as specified and directed. |
| 37 | Supply and fixing in replacement of damaged nitrile insulation 19mm thick over PPR/GI pipes of 20mm bore size complete all as specified and directed. |
| 38 | All as per ser item No.37 here -in-before but for 25/32 mm dia |
| 39 | S&F in replacement of autocut controller for tracer/antifreezing cable complete with all electrical connection, 230V, 50 Hz all as specified and directed. |
| 40 | Supply and laying in replacement of HDPE(High density Polyethylene) flexible pipe size 32/40 MM ( Coil Form) complete with accessories such as socket, tee, bend, nipple etc for leakproof joint fix on wall /floor/ surface all as directed by Engr-in-charge . |
| 41 | Supply and fix in repair of 4 sqmm 2 core copper PVC insulated un-sheathed flexible cable comleted all as spd. |
| 42 | Supply and fix in repair of junction box of size 195x140x65 mm (IP 66) water tight for termination of power cable and tracer wire 15-20A/220V compete all as spd.Make - Sintex Model No. GSJB -1510 |
| 43 | Repair/Replacement of Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron srip 25x4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion. |
| 44 | Cleaning of clear water (supply tank) Semi UG sump type of capacity upto 22500 Ltr at pump house khaltsi by taking out the mud, silt/sand and other partical by any means from bottom of tank and removing the waste material to a distance not less than 50m and spreading/levelling complete all as directed, washing and scrubing down of algae/scales/dirt/vegetation and shrubs from the inside walls of tank with wire brush, washing with lime mixed water including applying two coats of white wash on inside walls of tanks after preparation of surface and providing a block of size 90x60cm on external surface of wall with black synthetic enamel paint including writing the (i) Capacity of tank , (ii) Tank cleaned on and (iii) Next due date of cleaning with white paint, complete all as specified and directed by Engr-in-charge. Note: The Cleaning of clear water (supply tank) Semi UG sump shall be taken twice in one contract period and paid separately for each cleaning. |
| 45 | All as per above ser item No.44 here -in-before but capacity of semi UG Sump 80000 Ltrs at meal dte Khaltsi |
| 46 | Deduct Credit for Demolished/Dismantled material Rs (-)59,445.00 (Minus) as listed in Schedule 'A' Part-II (Credit Schedule)Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'. Please Enable Macros to View BoQ information |
