|
| 1 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep and getting out in any type soil for laying of pipe lines etc, complete all as specified and directed by Engineer-in-Charge. |
| 2 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm, complete all as specified and directed by Engineer-in-Charge. |
| 3 | Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge. |
| 4 | Material and labour for cutting of existing bitumen road / CC road / PCC hard standing up to 15 cm depth for laying of pipe lines and making good the disturbed surfaces by providing PCC 1:2:4 type B-1 (using 20mm graded aggregate) after laying of pipes lines and returning filling of soil, complete all as specified and directed.Note:- Excavation and earth work below road / hard standing thickness shall be measured and paid under relevant items. |
| 5 | Taking up or down steel tubing and connections of size 50 mm dia for taking credit, complete all as specified and directed by Engineer-in-Charge. |
| 6 | Taking up or down steel tubing and connections of size 20 mm dia for taking credit, complete all as specified and directed by Engineer-in-Charge. |
| 7 | Taking down gun metal gate valve of size 50 mm, complete all as specified and directed by Engineer-in-Charge. |
| 8 | Taking down gun metal gate valve of size 20 mm, complete all as specified and directed by Engineer-in-Charge. |
| 9 | Supplying, laying, jointing, testing and commissioning of 50 mm dia, medium grade galvanized iron (GI) pipes conforming to IS:1239 Part-I (2004), including all fittings such as bends, tees, reducers, sockets, unions, nipples, clamps and supports, with threaded joints using approved sealing material, complete with cutting, threading, alignment, fixing in position, laid in trenches / fixed to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-Charge. |
| 10 | Supplying, laying, jointing, testing and commissioning of 20mm dia medium grade galvanized iron (GI) pipes conforming to IS:1239 Part-I (2004), including all fittings such as bends, tees, reducers, sockets, unions, nipples, clamps and supports, with threaded joints using approved sealing material, complete with cutting, threading, alignment, fixing in position, laid in trenches / fixed to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-Charge. |
| 11 | Supply and fix Gun-metal, gate valves, with iron wheel head, screwed both ends for iron pipe of size 50mm nominal bore complete all as specified and directed by Enginee-in-Charge. |
| 12 | Supply and fix Gun-metal, gate valves, with iron wheel head, screwed both ends for iron pipe of size 20mm nominal bore complete all as specified and directed by Enginee-in-Charge. |
| 13 | Material and labour for brick masonry with sub class B bricks, straight or curved on plan exc 6m mean radius in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 14 | Material and labour for rendering 10mm thick cement plaster 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (with out using extra cement) complete all as specified and directed by Engineer-in-Charge. |
| 15 | Material and Labour for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping with necessary form work etc complete all as specified and directed by Engineer-in-Charge. |
| 16 | SCHEDULE OF CREDITNote :- Amount of Rs. 3,72,565.00 indicated in Tender Documents as Schedule of Credit shall be deducted from the total quoted amount of BOQ. Please Enable Macros to View BoQ information |
