|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE 881 EWS C/O 56 APO NAME OF WORK: REPAIR TO FLOORING, PLASTERING, PLUMBING WKS, PERIODICAL SERVICES AND MISC REPAIR IN VARIOUS UNITS AT SURANKOTE AND K NALLAH UNDER AGE B/R-III OF GE 881 EWS Contract No : GE/PNH-114/2025-26 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Demolition of cement concrete (un reinforced) in ground floors and paving n exc. 15 cm. thickness, below or above ground level complete all as specified and directed. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ), removing serviceable tile to store and rubbish off the premises complete all as specified and directed. |
| 4 | Dismantling wall/ceiling board (fibre, pulp, insulation, etc) or insulation board slabs/blankets, of any thickness, including cover fillets complete all as specified and directed. |
| 5 | Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 6 | 4 mm thick E-board with and including fixing to frame work made Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl Seat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including fixing of E-board as per manufacturer instructions complete all as specified and directed. |
| 7 | Hollow PVC wall Lining / panelling consisting of 5mm thick plain colour PVC sheet including PVC fillets as per manufacturer instructions and fixing at site complete all as specified and directed |
| 8 | 50mm thick PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in plinth protection finished fair & even laid in alternate bays n.exc 2m in length and joints filled with bitumen mastic compound in the ratio of 1:3 complete all as specified and directed. |
| 9 | Non skid coloured ceramic tiles area of each tile exc 0.18 sqm but not exc 0.38 Sqm, 7 to 8 mm thick, as in floors etc. jointed in neat cement slurry and pointed in colored cement to match colour of tiles including 15mm thick screed bed or bedding layer with CM 1:6 complete all as specified and directed. |
| 10 | All as per Ser item No 8 above but in vertical surfaces such as skirtings, dados and risers to steps etc including 10 mm thick rendering in CM (1:4) complete all as specified and directed. |
| 11 | Non skid coloured ceramic tiles exc 0.06 sqm but not exc 0.11 Sqm 7 to 8 mm thick, as in floors etc. jointed in neat cement slurry and pointed in colored cement to match coloured tiles incl 15mm thick screed bed or bedding layer with CM 1:6 complete all as specified and directed. |
| 12 | Glazed ceramic colour tiles in vertical surface 300x 200x 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match with the colour of tiles, fixed over and including 10mm thick plaster in cement mortar 1:4 complete all as specified and directed. |
| 13 | Rendering 15 mm thick in cement mortar 1: 6 on other than fair faces of brick work or concrete surfaces on walls, finished even and smooth with out using extra cement complete all as specified. |
| 14 | Preparation of newly plastered surfaces and applying two coats of oil emulsion distemper over a coat of primer on walls complete all as specified and directed |
| 15 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 16 | Dismantling of steel or wrought iron or mild steel of any description complete all as specified and directed. |
| 17 | Dismantling timber scantling 40 Sqcm and over in any section complete all as specified and directed. |
| 18 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 19 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 20 | Mild Steel rolled section in purlin, main and cross beam, rafter,posts etc. incl connected cleats, hold fasts etc of grade conforming to Fe 410-W (Gde E-250 quality A) all as specified and direcetd. |
| 21 | Mild steel flat iron for wind ties for roof including securing bolts, necessary drilling, bolting or riveting etc and similar work conforming to Fe-210 Gde E-165 complete all as specified and directed. |
| 22 | Second class Hard-wood in scantlings , clean sawn timber framed and fixed, all as specified and directed. |
| 23 | Taking down shutter of any description, not exc 1.0 sq.m each complete all as specified and directed. |
| 24 | Taking down chowkats or frames n exc 1.50 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 25 | Taking down chowkhats or frames with shutters exc 1.5 Sqm but n.exc 4 Sqm (without taking off shutters from frame) complete all as specified and directed. |
| 26 | 2nd class HW plain, solid straight chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.. |
| 27 | 35 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board, medium density, wood particle board with commercial face veneered supplied & fitted to chowkat complete all as specified and directed. |
| 28 | 30mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a), supplied & fitted to chowkats complete all as specified and directed by engr in charge. |
| 29 | Solid PVC moulded door frame of size 50mmx47mm made out of 5mm prelam coloured PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet as reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed. |
| 30 | Factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam (Nut Brown Colour) PVC Sheet on the front face & 2mm prelam (Nut Brown Colour) PVC Sheet on back face, and fixing in the frame at site as per specification and drawings on page 161 of SSR (Part - II) 2010 complete all as specified and directed.NOTE : Cadmium screws to be used for fixing and fixtures |
| 31 | 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed. |
| 32 | 75 mm long mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed complete all as specified and directed. |
| 33 | 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. . |
| 34 | 100mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 35 | 150 mm long aluminium handles, cast type, anodised and fixed complete all as specified and directed.. |
| 36 | 100 mm long aluminium handles, cast type, anodised and fixed complete all as specified and directed. |
| 37 | 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 38 | Preparation of wood and wood based surfaces of any description and applying 2 coats of synthetic enamel paint over a coat of pink primer all as specified and directed. |
| 39 | Figured glass, pin headed type, 3mm thick & glazing with oil putty in n. exc 0.5 sqm in each pane complete all as specified and directed. |
| 40 | Preparation of steel & Iron surfaces, width or girth exceeding 10cm & apply two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as spd & directed. |
| 41 | Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 as specified & directed. |
| 42 | PCC ,1:3:6 type C1, using 20 mm crushed stone aggregate as in bed blocks for embedding hold fast etc. complete all as specified and directed. |
| 43 | Taking down aluminium door/window of any description complete all as specified and directed. |
| 44 | Door closer (Aluminium extruded section) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 45 | S & F in repairs door closer (Aluminium extruded section) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 46 | Powder coated (coating not less than 50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including 5.5 mm thick Sheet glass (tinted/transparent as approved), selected quality complete all as specified and directed. Note : Door opening shall be measured and paid. |
| 47 | Powder coated (coating not less than 50 micron) aluminium window/ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. including 5.5 mm thick Sheet glass (tinted/transparent as directed), selected quality complete all as specified and directed. Note : Opening shall be measured and paid. |
| 48 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 49 | Supply only 5.5 mm thick Sheet glass, selected quality, in squares exc. 0.5 sq. m each pane and the directions of Engineer-in-Charge. |
| 50 | Preparation of old surfaces of plastered or unplastered and applying one coat of white wash on walls complete all as specified and directed. |
| 51 | Preparation of old surfaces of plastered or unplastered and applying one coat of oil bound distemper (any tint) on walls complete all as specified and directed. |
| 52 | Complete removal of existing treatment on walls and applying two coat of oil bound distemper (any tint) on walls complete all as specified and directed. |
| 53 | Preparation of old steel & Iron surfaces, width or girth exceeding 10cm & applying one coats of synthetic enamel paint of 1st quality complete all as specified and directed. |
| 54 | Preparation of old painted surfaces of wood/wood based materials exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 55 | Taking up or down steel tubing of 15mm bore , medium grade, including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 56 | Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 57 | Taking up or down steel tubing of 20mm bore , medium grade, including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 58 | Steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 59 | Supply and fix in repair Bib tap fancy type cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule and fixed, complete complete all as specified and directed. |
| 60 | Stop valve/angle valve cast copper alloy,chromium plated with capstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed in repair complete all as specified and directed. |
| 61 | Vitreous china Orissa pan of pattern, long pan size 580x440mm , with ‘P’ or ‘S’ trap, front or back inlet and integral foot rest complete fixed in repairs including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe, and antisiphon pipe complete all as specified and directed. |
| 62 | Supply and fix in repairs PVC low level flushing cistern of 10 Litres with all internal fittings incl flush pipe and fixing to supply pipe complete all as specified and directed. |
| 63 | PVC connection 45 cm long fitted with PTMT nut and washer on both ends, fixed to 15 mm bore iron pipes complete all as specified and directed. |
| 64 | S&F in Repair 15mm pillar taps fancy type, cast copper alloy , with capstan heads, chromium plated, screw down high pressure with long screwed shanks and fly nuts, screwed for iron pipes complete all as specified and directed. |
| 65 | S&F in repair 32mm bore PVC waste pipe |
| 66 | S&F in repair CP jet spray with holder for EWC, 1.5m long complete all as specified and directed. |
| 67 | S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete including fixing bolts and connection to drain or outgoing pipe and to flushing pipe, and anti syphonage pipe complete all as specified and directed. |
| 68 | S & F in repair chromium plated telephonic health faucet shower with flexible tube of stainless steel, 1.5 Mtr long & hook, multi flow 15mm dia for iron pipe or for brass ferrule fixed in repair complete all as specified & directed. |
| 69 | S & F in repair plastic water closet seat cover, white, closed pattern with flat bottom and cover & mild steel chromium plated or aluminised or PVC hinging device complete all as specified and directed |
| 70 | S&F in repair vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 71 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 72 | Dismantling water tanks of any size or capacity above 500 but n exc 1000 L and removing to store complete all as specified and directed. |
| 73 | Rotational moulded (HDPE), water storage tank 1000 litre capacity (cylinderical vertical with threaded closed top) hoisted & fixed in position all as specified in SSR Part-I complete all as spfd & directed. |
| 74 | S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe of 20mm dia complete all as specified and directed. ( Minimum Wt 210 gms) complete all as specified and directed. |
| 75 | Taking down existing tar felt or of any description including cement plaster or concrete of any thickness from the roof surfaces of building including cleaning the surfaces in all respect & preparing it for further treatment & removing rubbish from site complete all as specified and directed. |
| 76 | Water proofing treatrment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top :- (a) Applying bitumenous primer @ 0.4 ltrs per Sqm over plastered surfaces of roof including parapet surface. (b)Over the priming coat , applying a tack coat of bitumen @ 1.2 kg/sqm of paving grade butumen Vg 20 (60-80 penetration) and providing APP based polymeric membrane minimum weighing 3.60 kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 200 gms/sqm) laid on bitumen surface by forced application and inserting in groove above 15cm from roof in parapet including minimum overlap of 100mm and 75mm at end and sides of the polymeric membrane respectively and sealed all overlaps and joints with suitable adhesive as per manufacturer's instruction and including applying bitumen Vg20 paving grade (60 to 80 penetration) @1.20Kg/Sqm & blinded with fine dry sand @0.50Kg/Sqm including testing. (Note :- (i)Laying of APP bassed polymeric membrane shall be done with torch application methed or as per manufacturer's instructions. (ii)APP based polymeric membrane shall be \\"Dr Fixit\\" manufacturered by M/S Pidilite Industries or \\"MOPLY FP 3MM\\" manufactured by M/S Texsa India Limited and 'Hyperplus\\" by IWL India Limited Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
