Name of Work:- Road construction work by Hotmix Plant from C 274 to C 258 in Universal Park C Block Radha Garden in Ward No. 24.
Sl. No.
Item Description
1
Providing & laying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 KG per sqm on the prepared bituminous surface cleaned with mechanical broom
2
Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading premixed with bituinous binder @ 4.50 per cent by weight of total mix and filler transporting the hot mix to work site laying with a hydrostatic paver finished to the reqrired grade level and alignment rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction (Ref. to MortH Specification No 505 complete in all respacts
3
Providing and laying bituminous concrete with higer capacity batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder @ 5.4 Per cent of mix and filler, transporting the hot mix to work site laying with a hydrostatic paver finisher with sensor control to the required grade level and alignment rolling with smooth wheeled vibratory and tandom rollers to achieve the desired compaction as per morth Specification No 507 complete in all respacts
4
Providing & laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms /sq.mt. area . Thickness of 2.5 mm inclusive of surface applied glass beads as per I.R.C uniform and free from steaks and holes.
5
Reflective raised pavement marker with shanks providing and fixing of raised pavement marker with twin shanks of adequate length anchored with epoxy/bitumin adhasive of approved make (cat eye) type x-ASTMD-4956-04 Avery dennision /3 m(USA MAKE) HEAVY molded body of poly carbonate ,ASA,HIPS ORABS Able to support a load of 13.665MT as per given morth circuler no RW/NH33023/10/97/DO-III dated 11.6.1997
6
M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work
7
12 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc.
8
Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc.
9
Supply and laying 53mm to 22.4mm size stone aggregate.
10
consolidtion of stone ballast by hand rammer i/c opening out stacks sorting kankar into three sizes,repairing patches in existing road surface with kankar making medhi to retain water and ramming and also i/c carriage of metal upto 30 mtr carriage of water 200 mtr supply and maintenance of barriers and all tools and plants required for proper completion of work ,kanker to be supplied to the contractor free at site but upto 10cm loose thick coat but excluding roller charge
11
Supplying & fixing 80 mm thick Precast colour cement concrete I shape inter locking paver block ISI mark confirming to IS 15658-2006 with top layer of minimum 5 mm thickness having plan dimention 200x( 160+120mm) of op cement , smooth high gloss finish, skid resistant,manufactured from rubur moulds through vibro -compression mechanism. The compressive strength of concrete pavar block shall not be less than 40MPa and weight 4.5 kg per no. including cost of meterial, with blanket layer of 4.00cm thick fine sand including labour T& P etc required for proper completion of the work as directed by Engineer-in-charge. colour tiles
12
Supply/ fixing of black granite stone sign board with cutting of given maters as per direction of engineer in charge in all complete Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
