|
| 1 | Dismentalling reinforce cement concrete or reinforce brick work including staking of matrial as direct by the ingineer charge within a distance of 60 meter (200 feet) |
| 2 | Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). |
| 3 | Dismantling of old brick woark |
| 4 | Concrete with 4 cm. gauge Brick Ballast fine sand of 1.25 F.M. and cement in proportion are 12:6:1 in foundation and under floors, including supply of all materials, labour. T & P etc. Required for proper completion the work. |
| 5 | M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work S.I No.305 a +310 |
| 6 | (a) Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper complition of the work. saplings of girth upto 30 cms. measured at a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared. including cost of sand. |
| 7 | M-150 brick work in 1:4one cement and four course sand . mortar in superstructure including supply of all materials labour, T & P etc required for proper complition of the work |
| 8 | 12 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc. SI No.584 (A) |
| 9 | RCC 1:1.5:3 in cement coarse sand and grit 2 cm. gauge. |
| 10 | Mild steel or iron such as in plane reinforcement concrete. |
| 11 | Supply and fixing 6 mm. (¼\\") China white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and Tools and Plants. |
| 12 | 2.5 cm (1\\") thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1\\") graded approved stone grit, laid in panels finished with 3 mm. (1/8\\") floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3\\") thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½\\") gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. |
| 13 | As in item 360 above but 2.5 cm thick and of cement concrete consisting of 1 part cement, 1½ parts approved coarse sand and 3 parts approved 10 mm. graded stone grit and including water proofing material as ordered by the Engineer incharge in the proportion as specified by the manufacturer. |
| 14 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required |
| 15 | 15 mm nominal dia Pipes |
| 16 | 25 mm nominal dia Pipes |
| 17 | Supply and hoisting of low density polythylene seamless one peace moulded tank and placing the same in proper position including all taxes labour and t&p etc for proper completion of the work. Tank should be ISI marked. |
| 18 | Providing wall putty on New surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats |
| 19 | Providing cement primer on old/new surfaces |
| 20 | Finishing wall with water proof paint of approved make and quality with three coat as per SI No 660,+661 |
| 21 | paniting roofs or other iron work in large area with one coat priming and one coat of approved (above one Sq Metre) paint (British antesol or equivalent) including supply of all materials labour Tools & plants etc required for proper completion of the work paint to be used ISI Marked. (S.I. 644+645 ) |
| 22 | M.S. or iron work in stair case roilling in heavy sizes such as trusses, built up gates, records racks, roof work, Gates etc including rivetting or welding where necessary. S.I. 502 A |
| 23 | Deduction cost of old bricks |
| 24 | Deduction cost of old bricks bats Please Enable Macros to View BoQ information |
