|
| 1 | Disconnecting damaged overhead/ terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge.D.S.R 14.79 |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - chargeNominal concrete 1:4:8 or leaner mix (including equivalent design mix) D.S.R.15.2.2 |
| 3 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead 15.56 |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -all work up to plinth level 1: 4 : 8 (1 cement : 4 coarse sand : 8 graded stone ballast aggregate 40 mm. nominal size) (zone-III) Ref. to DAR 4.1.8 |
| 5 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D- 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane 3 mm thick DSR 14.91.1 |
| 6 | Disposal of moorum/building/ malba/rubbish /similar unservicealble dismantled of waste material by mechanical transport including loading transporting, unloading to approved municiple. dumping ground for lead beyond 10km for all lifts completion as per direction of E/I. Note- item to be applicable in urban areas having directions for restricted hours for movement /plying of load carrying motor vehicle to 3.5 cum or more. DSR 1.1.18 |
| 7 | Removing white on colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.DSR 13.88 |
| 8 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) DSR 13.4.1 |
| 9 | Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer , over the plastered wall surface to prepare the surface even and smooth complete. Item no.- DSR 13.80 |
| 10 | Finishing walls with Premium acrylic smooth exterior paint with Silicon additives of required shade: New work (Two or more coats applied @ 1.43ltr/10sqm over and including priming coat of exterior primer applied @ 0.90kg/10sqm) (Apex ultima, weather coat all guard) Asian /Berger DSR 13.47.1 |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. DSR 13.62.1 |
| 12 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. DSR 13.82.2 Two coats |
| 13 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.18.48 Please Enable Macros to View BoQ information |
