|
| 1 | STP Pole 11 mts long |
| 2 | ACSR Dog Conductor |
| 3 | 33KV Polymer Pin Insulator |
| 4 | 33KV Polymer Disc Insulator |
| 5 | Terminal Gaintry |
| 6 | 33KV Main bus bar complete with structure |
| 7 | 33KV Disc Insulator for Busbar with fitting |
| 8 | 33KV Line Isolator |
| 9 | 33KV Bus Isolator |
| 10 | 33KV Post Insulator |
| 11 | T/F Bus Completed with structure |
| 12 | 33KV Lightening Arrestor |
| 13 | 90 ibs rail picces (44.64 kg/m) |
| 14 | Bus Coupler 350MVA |
| 15 | Control Cable 4x2.5mm2 |
| 16 | Control Cable 2x2.5mm2 |
| 17 | X-Arm M.S. Angle(65x65x6)mm V-Type 11kv |
| 18 | M.S.Channel(125x65x1300)mm T-Off |
| 19 | ACSR Weseal Conductor |
| 20 | 11KV Disc Insulator with fitting (Polymer) |
| 21 | Dropper Angle |
| 22 | 11kv Disc Insulator with Pin(Polymer) |
| 23 | Stay Complete (stay rod 16x1800mm, stay Wire 5kg, Stay clamp, bolt & nut with grouting) |
| 24 | Earthing Complete |
| 25 | Top Channel |
| 26 | LT AB Cable (1x120+1x95+1x16) |
| 27 | 3 PH Distribution Box |
| 28 | Suspention Clamp for LT with I Hook |
| 29 | Dead End Clamp for LT with I Hook |
| 30 | Piercining Cable Connector of size 120 mm2 |
| 31 | 11KV 3 Core 185mm2 XLPE Cable |
| 32 | 11KV 3Core 185mm2 Outdoor Termination Kit |
| 33 | 11KV IPMO with Fixing clamp |
| 34 | 11KV Fues Set (drop out) with clamps |
| 35 | Cross Brasing Angle |
| 36 | G.L. Wire 6SWG |
| 37 | GAURDING Angle |
| 38 | X-Arm holding clamp with nut & bolt |
| 39 | Danger Board with nut & Bolt |
| 40 | F-Bracket for fitting of top insulator with nut & bolt |
| 41 | Barbed Wire |
| 42 | T-Off, Top, Dropper clamp with nut & bolt |
| 43 | PG Clamp for wesal and Dog Conductor |
| 44 | G.I. Pipe 6''Dia |
| 45 | Various type nut, bolts & washer |
| 46 | Copper L-pieces 50x225x10mm |
| 47 | 250 mm2 AI Lugs |
| 48 | 400 mm2 AI Lugs |
| 49 | 3 Phase LT Distribution Boxes Including Clamps Nut & Bolt |
| 50 | I.T. XLPE Cble AI. 1x400mm2 |
| 51 | LTXLPE Cable AI. 1x240mm2 |
| 52 | Tailness Unit Protection for distribution t/f |
| 53 | P.G. Clamp for Conductor with nut & bolt |
| 54 | Alluminium paint |
| 55 | Red oxide paint |
| 56 | 24 Volt Battery and Battery Charger with Cabinet |
| 57 | Plinth & foundation of VCB |
| 58 | Plinth & foundation of 5MVA Transformer |
| 59 | Plinth & foundation of 250KVA and 400KVA Transformer |
| 60 | Steel structure for 33KV CT |
| 61 | 33KV Line Isolator structure |
| 62 | 33KV Bus Isolator Structur |
| 63 | 33KV Lightening Arrestor Structure |
| 64 | 33KV Post Insulator Structure |
| 65 | 5MVA Transformer |
| 66 | 250KVA T/F 11/.4KV New |
| 67 | 400KVA T/F 11/.4KV New |
| 68 | 33KV VCB |
| 69 | Control panel I/C for 33KV Single T/F |
| 70 | CT 200/100/1-1A |
| 71 | 11KV Incoming CTR 600/300/5A 350MVA |
| 72 | 11KV VCB O/G Feeder CTR 200/100/5A |
| 73 | Sp Earthing of Indoor and outdoor equipment etc Connection with G.I. Strip off size 30x50x5mm including cost of Material |
| 74 | Sp Earthing of 5MVA T/F Netural or Body and Connection with G.I. Strip off Size 30x5mm including cost of Material |
| 75 | Sp Earthing of 250KVA & 400KVA T/F Netural or Body and Connection with G.I. Strip off Size 30x5mm including cost of Material |
| 76 | Cartage & Erection Charge |
| 77 | Concreting of Pole |
| 78 | Concreting of Stay |
| 79 | Switch yard at Amwar Power house size-18mx30m, 1 control room size-6mx5m, 4 nos of transformer plateform near Kanhar Dam 2mx2m, compound with 6 fit high brick measonery boundry wall with sundry all work complete in all respect according to drawing attached and as per direction of Engineer-in-charge. |
| 80 | Meter Room Please Enable Macros to View BoQ information |
