|
| 1 | Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed. |
| 2 | S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in lieu of screws, complete all as specified and directed. |
| 3 | Pre-painted Galvanised aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength 0f 550 Mpa as in roof covering /clading to wall , fixed with self tapping screws, complete all as specified and directed. |
| 4 | Pre-painted galvatume aluminium zinc coating GI based plaIn steel sheet 0.50 mm thick of any colour having tensile strength 0f 550 Mpa as in roof covering /clading to wall , fixed with self tapping screws, complete all as specified and directed. |
| 5 | S&F 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed. |
| 6 | M&L Preparatoion of new steel surface and and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces, complete all as specified and directed. |
| 7 | Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation board/slabs/ blanket any thickness including cover filllets, complete all as specified and directed. |
| 8 | M&L 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in ceiling, complete all as specified and directed. |
| 9 | M&L for 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in walls, complete all as specified and directed. |
| 10 | M&L 4 mm thick veneered decorative plywood, grade 1 ( with BWR resin) with only one side decorative face veneers fixed with nails as in wall panelling, complete all as specified and directed. |
| 11 | M&L 4 mm thick veneered decorative plywood, grade 1 ( with BWR resin) with only one side decorative face veneers fixed with nails as in ceiling works, complete all as specified and directed. |
| 12 | S&F for 5mm thick PVC hollow sheet (the bthickness of inner wall 0.7 to 1.00 mm ) in wall panneling inclusive of solvet cement and fiing at site with U clip or PVC frame as per specification and drawging, complete all as specified and directed. |
| 13 | M&L for readymade soft wood wall panneling in strips of 100 mm width 10mm thickness having tongue and groove fiing arrangement fixed to wooden frame work as per manufacturer instruction, complete all as specified and directed. |
| 14 | Dismantling timber framed in fillets,rails, posts rafters,purlines, etc under 40 sq cm in section, complete all as specified and directed. |
| 15 | M&L second class Hardwood plain filllets, rectangular in section, clean swan, secured with nails exc 13 and n.exc 25 Sqcm, complete all as specified and directed. |
| 16 | M & L for 12mm width teak wood lipping 6 mm thick for Patical board/block board complete fix with nail, complete all as specified and directed. |
| 17 | S&F in repair for second class softwood 1.218m x 0.198m x 8mm thick non glue laminated wooden boarding as in flooring including 0.6mm PE poly moisture foam as in underlay barrier of overlapping 20cm fix them with adhesive tape, boarding fix in floating manner including taking down, complete all as specified and directed. |
| 18 | Deduct Schedule of Credit of as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item Please Enable Macros to View BoQ information |
