|
| 1 | Maintenance and servicing to DG set including cleaning of DG set canopy,radiator and other parts with alkaline based chemical (water based) including replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing/oiling of bearings of engine , alternator and other moving parts checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels of capacity 625 KVA DG set installed complete all as directed by Engr-in-Charge. Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iii) Work shall be carried out at site at different location. |
| 2 | Supply only the following spare parts of existing make and capacity and should be compactable & suitable for 625 KVA DG Set, complete all as directed by Engr-in-Charge:-(a). TECHO Cable |
| 3 | (b). PRIMING PUMP |
| 4 | (c). O RING |
| 5 | (d). SUPER BYPASS FILTER WITH O RING |
| 6 | (e). RADIATOR HOSE SET |
| 7 | (f). CLAMP SET |
| 8 | (g). AIR CLEANER HUMP HOSE |
| 9 | (h). AIR CLEANER HUMP HOSE CLAMP |
| 10 | (j). TURBO HUMP HOSE |
| 11 | (k). TURBO HUMP HOSE CLAMP |
| 12 | (l). VENT HOSE PIPE |
| 13 | (m). Lub oil filter |
| 14 | (n). FUEL PRE FILTER |
| 15 | (o). FUEL MICRO FILTER |
| 16 | (p). AIR FILTER PRIME |
| 17 | (q). AIR FILTER SECOND |
| 18 | (r). OIL TEMP. GAUGE |
| 19 | (s). WATER TEMP. GAGUE |
| 20 | (t). OIL PRESSURE GAUGE |
| 21 | (u). Fan Belt |
| 22 | (v). Uniball Joint |
| 23 | (w). Thermostate |
| 24 | (x). Hose diesel ( 7 Ft. ) |
| 25 | (y). Oil filter head gasket |
| 26 | (z). RPM meter |
| 27 | Maintenance and servicing to DG set including cleaning of DG set canopy,radiator and other parts with alkaline based chemical (water based) including replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing/oiling of bearings of engine , alternator and other moving parts checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels of capacity 500 KVA DG set installed complete all as specified and directed. Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iv) Work shall be carried out at site at different location |
| 28 | Supply only the following spare parts of existing make and capacity and should be compactable & suitable for 500 KVA DG Set, complete all as directed by Engr-in-Charge:-(a). TECHO Cable |
| 29 | (b). PRIMING PUMP |
| 30 | (c). O RING |
| 31 | (d). SUPER BYPASS FILTER WITH O RING |
| 32 | (e). RADIATOR HOSE SET |
| 33 | (f). CLAMP SET |
| 34 | (g). AIR CLEANER HUMP HOSE |
| 35 | (h). AIR CLEANER HUMP HOSE CLAMP |
| 36 | (j). TURBO HUMP HOSE |
| 37 | (k). TURBO HUMP HOSE CLAMP |
| 38 | (l). VENT HOSE PIPE |
| 39 | (m). Lub oil filter |
| 40 | (n). FUEL PRE FILTER |
| 41 | (o). FUEL MICRO FILTER |
| 42 | (p). AIR FILTER PRIME |
| 43 | (q). AIR FILTER SECOND |
| 44 | (r). OIL TEMP. GAUGE |
| 45 | (s). WATER TEMP. GAGUE |
| 46 | (t). OIL PRESSURE GAUGE |
| 47 | (u). Fan Belt |
| 48 | (v). Uniball Joint |
| 49 | (w). Thermostate |
| 50 | (x). Hose diesel ( 7 Ft. ) |
| 51 | (y). Oil filter head gasket |
| 52 | (z). RPM meter |
| 53 | Maintenance and servicing to DG set including cleaning of DG set canopy,radiator and other parts with alkaline based chemical (water based) including replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing/oiling of bearings of engine , alternator and other moving parts checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels of capacity 320-400 KVA DG set installed complete all as specified and directed. Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iv) Work shall be carried out at site at different location |
| 54 | Supply only the following spare parts of existing make and capacity and should be compactable & suitable for 320-400 KVA DG Set, complete all as directed by Engr-in-Charge:-(a). TECHO Cable |
| 55 | (b). PRIMING PUMP |
| 56 | (c). O RING |
| 57 | (d). SUPER BYPASS FILTER WITH O RING |
| 58 | (e). RADIATOR HOSE SET |
| 59 | (f). CLAMP SET |
| 60 | (g). AIR CLEANER HUMP HOSE |
| 61 | (h). AIR CLEANER HUMP HOSE CLAMP |
| 62 | (j). TURBO HUMP HOSE |
| 63 | (k). TURBO HUMP HOSE CLAMP |
| 64 | (l). VENT HOSE PIPE |
| 65 | (m). Lub oil filter |
| 66 | (n). FUEL PRE FILTER |
| 67 | (o). FUEL MICRO FILTER |
| 68 | (p). AIR FILTER PRIME |
| 69 | (q). AIR FILTER SECOND |
| 70 | (r). OIL TEMP. GAUGE |
| 71 | (s). WATER TEMP. GAGUE |
| 72 | (t). OIL PRESSURE GAUGE |
| 73 | (u). Fan Belt |
| 74 | (v). Uniball Joint |
| 75 | (w). Thermostate |
| 76 | (x). Hose diesel ( 7 Ft. ) |
| 77 | (y). Oil filter head gasket |
| 78 | (z). RPM meter |
| 79 | Maintenance and servicing to DG set including cleaning of DG set canopy,radiator and other parts with alkaline based chemical (water based) including replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing/oiling of bearings of engine , alternator and other moving parts checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels of capacity 180-250 KVA DG set installed complete all as specified and directed. Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iv) Work shall be carried out at site at different location |
| 80 | Supply only the following spare parts of existing make and capacity and should be compactable & suitable for 180-250 KVA DG Set, complete all as directed by Engr-in-Charge:-(a). TECHO Cable |
| 81 | (b). PRIMING PUMP |
| 82 | (c). O RING |
| 83 | (d). SUPER BYPASS FILTER WITH O RING |
| 84 | (e). RADIATOR HOSE SET |
| 85 | (f). CLAMP SET |
| 86 | (g). AIR CLEANER HUMP HOSE |
| 87 | (h). AIR CLEANER HUMP HOSE CLAMP |
| 88 | (j). TURBO HUMP HOSE |
| 89 | (k). TURBO HUMP HOSE CLAMP |
| 90 | (l). VENT HOSE PIPE |
| 91 | (m). Lub oil filter |
| 92 | (n). FUEL PRE FILTER |
| 93 | (o). FUEL MICRO FILTER |
| 94 | (p). AIR FILTER PRIME |
| 95 | (q). AIR FILTER SECOND |
| 96 | (r). OIL TEMP. GAUGE |
| 97 | (s). WATER TEMP. GAGUE |
| 98 | (t). OIL PRESSURE GAUGE |
| 99 | (u). Fan Belt |
| 100 | (v). Uniball Joint |
| 101 | (w). Thermostate |
| 102 | (x). Hose diesel ( 7 Ft. ) |
| 103 | (y). Oil filter head gasket |
| 104 | (z). RPM meter |
| 105 | Maintenance and servicing to DG set including cleaning of DG set canopy,radiator and other parts with alkaline based chemical (water based) including replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing/oiling of bearings of engine , alternator and other moving parts checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels of capacity 100-125 KVA DG set installed complete all as specified and directed. Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iv) Work shall be carried out at site at different location |
| 106 | Supply only the following spare parts of existing make and capacity and should be compactable & suitable for 100-125 KVA DG Set, complete all as directed by Engr-in-Charge:-(a). TECHO Cable |
| 107 | (b). PRIMING PUMP |
| 108 | (c). O RING |
| 109 | (d). SUPER BYPASS FILTER WITH O RING |
| 110 | (e). RADIATOR HOSE SET |
| 111 | (f). CLAMP SET |
| 112 | (g). AIR CLEANER HUMP HOSE |
| 113 | (h). AIR CLEANER HUMP HOSE CLAMP |
| 114 | (j). TURBO HUMP HOSE |
| 115 | (k). TURBO HUMP HOSE CLAMP |
| 116 | (l). VENT HOSE PIPE |
| 117 | (m). Lub oil filter |
| 118 | (n). FUEL PRE FILTER |
| 119 | (o). FUEL MICRO FILTER |
| 120 | (p). AIR FILTER PRIME |
| 121 | (q). AIR FILTER SECOND |
| 122 | (r). OIL TEMP. GAUGE |
| 123 | (s). WATER TEMP. GAGUE |
| 124 | (t). OIL PRESSURE GAUGE |
| 125 | (u). Fan Belt |
| 126 | (v). Uniball Joint |
| 127 | (w). Thermostate |
| 128 | (x). Hose diesel ( 7 Ft. ) |
| 129 | (y). Oil filter head gasket |
| 130 | (z). RPM meter |
| 131 | Maintenance and servicing to DG set including cleaning of DG set canopy,radiator and other parts with alkaline based chemical (water based) including replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing/oiling of bearings of engine , alternator and other moving parts checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels of capacity 62.5 KVA DG set installed complete all as specified and directed. Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iv) Work shall be carried out at site at different location |
| 132 | Supply only the following spare parts of existing make and capacity and should be compactable & suitable for 62.5 KVA DG Set, complete all as directed by Engr-in-Charge:-(a). TECHO Cable |
| 133 | (b). PRIMING PUMP |
| 134 | (c). O RING |
| 135 | (d). SUPER BYPASS FILTER WITH O RING |
| 136 | (e). RADIATOR HOSE SET |
| 137 | (f). CLAMP SET |
| 138 | (g). AIR CLEANER HUMP HOSE |
| 139 | (h). AIR CLEANER HUMP HOSE CLAMP |
| 140 | (j). TURBO HUMP HOSE |
| 141 | (k). TURBO HUMP HOSE CLAMP |
| 142 | (l). VENT HOSE PIPE |
| 143 | (m). Lub oil filter |
| 144 | (n). FUEL PRE FILTER |
| 145 | (o). FUEL MICRO FILTER |
| 146 | (p). AIR FILTER PRIME |
| 147 | (q). AIR FILTER SECOND |
| 148 | (r). OIL TEMP. GAUGE |
| 149 | (s). WATER TEMP. GAGUE |
| 150 | (t). OIL PRESSURE GAUGE |
| 151 | (u). Fan Belt |
| 152 | (v). Uniball Joint |
| 153 | (w). Thermostate |
| 154 | (x). Hose diesel ( 7 Ft. ) |
| 155 | (y). Oil filter head gasket |
| 156 | (z). RPM meter |
| 157 | Maintenance and servicing to DG set including cleaning of DG set canopy,radiator and other parts with alkaline based chemical (water based) including replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing/oiling of bearings of engine , alternator and other moving parts checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels of capacity 15-30 KVA DG set installed complete all as specified and directed. Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iv) Work shall be carried out at site at different location |
| 158 | Supply only the following spare parts of existing make and capacity and should be compactable & suitable for 15-30 KVA DG Set, complete all as directed by Engr-in-Charge:-(a). TECHO Cable |
| 159 | (b). PRIMING PUMP |
| 160 | (c). O RING |
| 161 | (d). SUPER BYPASS FILTER WITH O RING |
| 162 | (e). RADIATOR HOSE SET |
| 163 | (f). CLAMP SET |
| 164 | (g). AIR CLEANER HUMP HOSE |
| 165 | (h). AIR CLEANER HUMP HOSE CLAMP |
| 166 | (j). TURBO HUMP HOSE |
| 167 | (k). TURBO HUMP HOSE CLAMP |
| 168 | (l). VENT HOSE PIPE |
| 169 | (m). Lub oil filter |
| 170 | (n). FUEL PRE FILTER |
| 171 | (o). FUEL MICRO FILTER |
| 172 | (p). AIR FILTER PRIME |
| 173 | (q). AIR FILTER SECOND |
| 174 | (r). OIL TEMP. GAUGE |
| 175 | (s). WATER TEMP. GAGUE |
| 176 | (t). OIL PRESSURE GAUGE |
| 177 | (u). Fan Belt |
| 178 | (v). Uniball Joint |
| 179 | (w). Thermostate |
| 180 | (x). Hose diesel ( 7 Ft. ) |
| 181 | (y). Oil filter head gasket |
| 182 | (z). RPM meter Please Enable Macros to View BoQ information |
| 183 | (z). RPM meter Please Enable Macros to View BoQ information |
