|
| 1 | R&M work of ESP Up-gradation. |
| 2 | Total of Schedule-2 Plant and Equipment Including Typing Test Charges and mandatory spares parts to be supplied from Employer's Country |
| 3 | Total of Schedule-3 Local Transportation including port Handling, Port Clearance , custom reconciliation & inland transit insurance and other local costs incidental to delivery of plant and Equipment including mandatory Spares. |
| 4 | Total of Schedule-4 Installation Services including Dismantling , Erection, Testing & Commissioning works, insurance covers other than inland transist insurance, associated civil Works and other services (Safety etc) |
| 5 | Total of Schedule-7 Goods & services Tax (Gst) R&M work of ESP Up-gradation at Bhilai PP-II (2X30MW+1X14MW)Referenc No/Bidding Document No:CMCC260004 Tender ID -2026_NSPCL_269123 SCHEDULE - 2 : PLANT AND EQUIPMENT INCLUDING TYPE TEST CHARGES AND MANDATORY SPARES TO BE SUPPLIED FROM WITHIN THE EMPLOYER'S COUNTRY Sl. No. Item Descrition Unit Of Measurement QTY. Rate Ex-works Price Amount Ex- Works Price Component |
| 6 | 2.0 A Supply of Main Equipment for ESP A.1 Mechanical items of new ESPs and ash handling system (3 nos.) Lot 1.0 0.0 A.2 Mechanical items for renovation of existing ESPs and ash handling systsem (3 nos.) Lot 1.0 0.0 A.3 Electrical items for both new and renovation of existing ESPs including ash handling system (3 nos.) Lot 1.0 0.0 A.4 Control and Instrumentation Items for both new and renovation of existing ESP’s including ash handling system (3 nos.) Lot 1.0 0.0 A.5 Commong equipment,piping, instrumentation for ash handling system Lot 1.0 0.0 A.6 Misc. Equipments ( other than specified above ) Lot 1.0 0.0 TOTAL (A) 0.0 B MANDATORY SPARES |
| 7 | Electrostatic precipitator (ESP) Mechanical Equipments |
| 8 | Support insulator |
| 9 | Shaft insulator |
| 10 | Emitting electodes (One Lot equal to 5% of total quantity of Each type and size installed in one unit) |
| 11 | Collecting electrode (One Lot equal to 2% of the total installed quantity in one ESP) |
| 12 | Inner arm assembly (One Lot equal to 10 nos. each for collecting & emitting system) |
| 13 | Outer arm assembly (One Lot equal to 20 nos. each for collecting & emitting system) |
| 14 | Plain bearing (One Lot equal to 25 nos. of each type and size) |
| 15 | Shock bar/anvil (One Lot equal to 25 nos. of each type and size) |
| 16 | Rappers 1.9.1 For electric rappers 1.9.1.1 Assembled rapper/drop rods (One Lot equal to 10 nos. of each size and type) Lot 1.0 0.0 1.9.1.2 Coil assembly along with sleeve nos. 4.0 0.0 1.9.1.3 Casing nos. 4.0 0.0 1.9.1.4 Gaskets & packing (One Lot equal to 10 nos. of each size and type) Lot 1.0 0.0 1.9.2 For tumbling rappers 1.9.2.1 Hammers (One Lot equal to 30 nos. of each size and type) Lot 1.0 0.0 1.9.2.2 Bearing components nos. 8.0 0.0 1.9.2.3 Shafts ( One set means one complete assembly of shaft for one field each for emitting rapping shaft & collecting rapping shaft) set 2.0 0.0 1.9.2.4 Gear motors (1 No. of each type and size) Lot 1.0 0.0 |
| 17 | For MEEP (only for Option-2) 1.10.1 Rotating Brush for the collecting electrodes (One Lot equal to 2% of the installed quantity in ESP for one 30MW unit of each type) Lot 1.0 0.0 1.10.2 Drive assembly with motor, Gear reducer and drive chain for the cleaning brushes (One Lot equal to 2% of the each type of istalled quantity for one unit of each type) Lot 1.0 0.0 1.10.3 Drive assembly with motor, gear reducer and drive chain for the collecting electrodes (One Lot equal to 2% of the istalled quantity in ESP for one 30MW unit of each type) Lot 1.0 0.0 1.10.4 Set of collecting electrode chain with drive and driven sprocket (One Lot equal to 2% of the istalled quantity in ESP for one 30MW unit of each type) Lot 1.0 0.0 1.10.5 Packing for the drive units of Collecting electrodes (One Lot equal to 2% of the istalled quantity in ESP for one 30MW unit of each type) Lot 1.0 0.0 |
| 18 | Electrostatic precipitator (ESP) Electrical Equipments |
| 19 | Transformer rectifier set 2.1.1 Complete set (1 No. of each type and size) nos. 1.0 0.0 2.1.2 High voltage insulator nos. 4.0 0.0 2.1.3 Field disconnecting Switches and Gaskets (For complete replacement for two Transformer rectifier sets) set 2.0 0.0 |
| 20 | Control system 2.2.1 Transformer-rectifier set controller nos. 2.0 0.0 2.2.2 Rapper controller complete nos. 2.0 0.0 2.2.3 Communication controller complete nos. 2.0 0.0 |
| 21 | Electronic cards 2.3.1 For rapper controller & ESP management system set 1.0 0.0 2.3.2 For transformer rectifier controller sets 2.0 0.0 2.3.3 Display unit (One Lot equal to 2 nos. of each type) Lot 1.0 0.0 2.3.4 Keyboard (One Lot equal to 2 nos. of each type) Lot 1.0 0.0 2.3.5 Push buttons for TR set controller sets 2.0 0.0 2.3.6 Indicating lamps set 2.0 0.0 2.3.7 Control fuses set 2.0 0.0 2.3.8 Power fuses set 2.0 0.0 2.3.9 Thyristor fuses set 2.0 0.0 2.3.10 Thyristor of transformer Rectifier controller set 2.0 0.0 |
| 22 | LT Switchgear 2.4.1 Complete breaker (One Lot equal to 1 no. of each type & rating) Lot 1.0 0.0 2.4.2 Spring charging motors (One Lot equal to 3 nos. of each type & rating) Lot 1.0 0.0 2.4.3 Aux. contact set (One Lot equal to 2 nos. of each type & rating) Lot 1.0 0.0 2.4.4 Limit switches( One Lot equal to 2 nos. of each type) Lot 1.0 0.0 2.4.5 Arc chutes ( One Lot equal to 1 set of each rating) set 1.0 0.0 2.4.6 Fixed contact set (One Lot equal to 1 set of each type and rating) set 1.0 0.0 2.4.7 Moving contact set (One Lot equal to 1 set of each type and rating) set 1.0 0.0 2.4.8 Arcing contact (One Lot equal to 1 set of each type and rating) set 1.0 0.0 2.4.9 Charging spring (One Lot equal to 3 nos. of each type & rating) Lot 1.0 0.0 2.4.10 Current transformer (metering) (One Lot equal to 3 nos. of each type & rating) Lot 1.0 0.0 2.4.11 Current transformer (protection) (One Lot equal to 3 nos. of each type & rating) Lot 1.0 0.0 2.4.12 Closing coil (One Lot equal to 6 nos. of each type & rating) Lot 1.0 0.0 2.4.13 Trip coil (One Lot equal to 6 nos. of each type & rating) Lot 1.0 0.0 2.4.14 CT for Bimetal O/L relays (One Lot equal to 3 nos. of each type & rating) Lot 1.0 0.0 2.4.15 Voltage transformer (One Lot equal to 1 nos. of each type & rating) Lot 1.0 0.0 2.4.16 Control supply transformer (One Lot equal to 1 nos. of each type & rating) Lot 1.0 0.0 2.4.17 Ammeter (One Lot equal to 2 nos. of each type & rating) Lot 1.0 0.0 2.4.18 Voltmeter (One Lot equal to 2 nos. of each type & rating) Lot 1.0 0.0 2.4.19 Relays (One Lot equal to 1 nos. of each type & rating) Lot 1.0 0.0 2.4.20 Power contactor (One Lot equal to 3 nos. of each type & rating) Lot 1.0 0.0 2.4.21 Coil of above contactor (One Lot equal to 3 nos. of each type & rating) Lot 1.0 0.0 2.4.22 Air break switches (One Lot equal to 2 nos. of each type & rating) Lot 1.0 0.0 2.4.23 DP air break switches (DC) (One Lot equal to 2 nos. of each type & rating) Lot 1.0 0.0 2.4.24 Control & selector switches (One Lot equal to 2 nos. of each type & rating) Lot 1.0 0.0 2.4.25 Control fuses & neutral links (One Lot equal to 10 nos. of each type & rating) Lot 1.0 0.0 2.4.26 Indicating lamps (One Lot equal to 20 nos. of each type & rating) Lot 1.0 0.0 2.4.27 Bus bar support insulators (each type) (One Lot equal to 10 nos. of each type & rating) Lot 1.0 0.0 2.4.28 Bus duct flexibles connectors (One Lot equal to 3 nos. of each type & rating) Lot 1.0 0.0 2.4.29 Primary disconnect in MCC (Male/ female contact) (One Lot equal to 5 set. of each type & rating) set 1.0 0.0 2.4.30 Push buttons (One Lot equal to 20 nos. of each type & rating) Lot 1.0 0.0 2.4.31 Power fuses (One Lot equal to 20 nos. of each type & rating) Lot 1.0 0.0 2.4.32 Thermal bimetal relays (One Lot equal to 5 nos. of each type & rating) Lot 1.0 0.0 2.4.33 Indication Lamp Holders complete (One Lot equal to 20 nos. of each type & rating) Lot 1.0 0.0 2.4.34 Maintenance tools and accessories for Maintenance (bidder to list) (One Lot equal to 1 set. of each type & rating) set 1.0 0.0 2.4.35 Terminal blocks (One Lot equal to 5 nos. of each type & rating) Lot 1.0 0.0 2.4.36 Busbar aluminum flat pieces (One Lot equal to 3 nos. of each type & rating) Lot 1.0 0.0 2.4.37 Busbar angles/formed pieces for breaker (One Lot equal to 1 set. of each type & rating) set 1.0 0.0 |
| 23 | Service Transformers (Dry type) (if applicable) 2.5.1 HT Bushing (One Lot equal to 3 nos. of each rating) Lot 1.0 0.0 2.5.2 LT Bushing (One Lot equal to 3 nos. of each rating) Lot 1.0 0.0 2.5.3 Neutral Bushing (One Lot equal to 1 no. of each rating) Lot 1.0 0.0 2.5.4 Neutral CT (One Lot equal to 1 no. of each rating) Lot 1.0 0.0 2.5.5 WTI with alarm & trip contract No. 1.0 0.0 2.5.6 Complete winding Limb (HV and LV) (One Lot equal to 1 nos. of each) Lot 1.0 0.0 2.5.7 Set of thermistor/RTD with associated leads Complete for one transformer set 1.0 0.0 |
| 24 | Lighting 2.6.1 Lamps (One Lot equal to 2% or 2 nos. whichever is more of each type and rating) Lot 1.0 0.0 2.6.2 Lamp holders (One Lot equal to 2% or 2 nos. whichever is more of each type ) Lot 1.0 0.0 |
| 25 | Electrostatic precipitator (ESP) C&I Equipments |
| 26 | Intergrated Controller 3.1.1 EPMS Controller Complete set 2.0 0.0 3.1.2 Electronic cards(One Lot equal to 2 set of each type and model) Lot 1.0 0.0 |
| 27 | Ash level switch for ESP hoppers |
| 28 | Complete Actuator (One Lot equal to 1 nos. of each type and rating) |
| 29 | Ash handling system |
| 30 | Airlock/Blow Tank System 4.1.1 Airlock/pump tank inlet valve ( 4 Nos. of each type and rating) Lot 1.0 0.0 4.1.2 Air lock/pump tank outlet valve ( 4 Nos. of each type and rating) Lot 1.0 0.0 4.1.3 Air lock/pump tank inlet/outlet valve seats (each) ( 4 Nos. of each type and rating) Lot 1.0 0.0 4.1.4 Airlock/pump tank air injector nozzles ( 4 Nos. of each type and rating) Lot 1.0 0.0 4.1.5 Air line valve solenoid ( 4 Nos. of each type and rating) Lot 1.0 0.0 |
| 31 | Converying Air compressors 4.2.1 Air Filter element Nos 3.0 0.0 4.2.2 Oil Filter Nos 2.0 0.0 4.2.3 Main Shaft oil seal Nos 2.0 0.0 4.2.4 Discharge check valve Nos 2.0 0.0 4.2.5 Inter cooler/After cooler parts (O-rings, gasket etc) Nos 2.0 0.0 4.2.6 Solenoid valve Nos 2.0 0.0 4.2.7 Coupling element Set 1.0 0.0 4.2.8 LP/HP Safety valve Nos.(each) 2.0 0.0 4.2.9 Motor DE Bearing Nos 2.0 0.0 4.2.10 Motor NDE Bearing Nos 2.0 0.0 4.2.11 Oil stop valve Nos 2.0 0.0 4.2.12 Minimum pressure valve Nos 2.0 0.0 4.2.13 Oil separator Nos 2.0 0.0 4.2.14 Compressor Motor Nos 2.0 0.0 4.2.15 Drive shaft assembly parts (Including bearings,O-rings, circlips, oil seal) Nos 2.0 0.0 4.2.16 Electronic regulator Nos 2.0 0.0 4.2.17 Expansion Module Nos 2.0 0.0 4.2.18 Oil pump parts Set 2.0 0.0 4.2.19 Lp/HP pinion Nos.(each) 2.0 0.0 4.2.20 Bypass valve Nos 2.0 0.0 4.2.21 Inlet valve assembly Nos 1.0 0.0 |
| 32 | Refrigerant Air dryer 4.3.1 Inner ring plate for discharge valve Nos 2.0 0.0 4.3.2 Ring plate for suction valve Nos 2.0 0.0 4.3.3 Compressor shaft seal assembly Nos 1.0 0.0 4.3.4 Piston ring/Guide ring Set 3.0 0.0 4.3.5 V-belts for compressor Set 1.0 0.0 4.3.6 Oil pressure failure safety switch Nos 1.0 0.0 4.3.7 Crank case heater Nos 1.0 0.0 4.3.8 Gaskets Set 1.0 0.0 4.3.9 Set of “O” rings and oil seals each type Set 1.0 0.0 4.3.10 Suction filter elements Set 2.0 0.0 4.3.11 Bearings Set 1.0 0.0 4.3.12 Complete set of suction valves Set 1.0 0.0 4.3.13 Complete set of Discharge valves Set 1.0 0.0 4.3.14 Thermostatic Expansion Valve Set 1.0 0.0 |
| 33 | Ash conveying line Isolation valve/Fittings 4.4.1 Material handling valve/Ash intake valve below ESP Nos 20.0 0.0 4.4.2 Fly ash extraction line segregating valve seats Nos 20.0 0.0 4.4.3 ash extraction line isolation valve Gates/Flaps (1 Set for replacement of each unit) Lot 1.0 0.0 4.4.4 Ash extraction line couplings (1 Set for replacement of each unit) Lot 1.0 0.0 4.4.5 Ash extraction line fittings (Bends/laterals) 2 Nos. for each degree & type bend & fittings Lot 1.0 0.0 TOTAL (B) (MANDATORY SPARES) 0.0 GRAND TOTAL SCHEDULE-2 [TOTAL-(A) + (B)] ( Bidders to mention this amount in sheet BOQ1 sl no 1.01 ) 0.0 Notes : |
| 34 | Unless stated otherwise a 'set' means items or sub-items required for each type/size range of the assembly/sub-assembly, required for complete replacement in one equipment/systems as the case may be. It is further, intended that the assembly/sub-assembly which have different orientation (like left hand or right hand, top or bottom), different direction of rotation or mirror image positioning or for any other reasons which result in maintaining two or more different sets of the spares to be used for the subject assembly/sub-assembly, these shall be considered as different types of assembly/sub-assembly. |
| 35 | Wherever quantity has been specified as percentage (%), the quantity of mandatory spares to be provided by the Bidder shall be the specified percentage (%) of the total population required to meet the specification requirements. In case the quantity of mandatory spares so calculated happens to be a fraction, the same shall be rounded off to next higher whole number. |
| 36 | The list above is indicative. The final list of mandatory spares shall be finalized after detailed engineering to the extent type of the spares depending on the quoted option. Howvere the cumulative total price for the mandatory spares shall be same as that quoted in the schedule above. |
| 37 | In case the description/quantity for any item mentioned in this Schedule is at variance from what has been stated in the Technical Specifications and its subsequent amendments and clarifications, the stipulations of the technical specifications and its subsequent amendment and clarifications shall prevail. |
| 38 | Wherever for the mandatory spares under \\"Unit Price\\" column \\"LOT\\" has been mentioned, bidder has to furnished the total price only. R&M work of ESP Up-gradation at Bhilai PP-II (2X30MW+1X14MW)Referenc No/Bidding Document No:CMCC260004 Tender ID -2026_NSPCL_269123 SCHEDULE- 3 : Local Transportation & Inland Transit Insurance and other local costs incidental to delivery of plant & equipment including mandatory spares Item Description Qty Unit Total Price (Indian Rupees) |
| 39 | 2.0 I MAIN EQUIPMENT 1.0 LOT II MANDATORY SPARES 1.0 LOT TOTAL OF SCHEDULE-3 ( I +II ) ( Bidders to mention this amount in sheet BOQ1 sl no 1.02 ) 0.0 R&M work of ESP Up-gradation at Bhilai PP-II (2X30MW+1X14MW)Referenc No/Bidding Document No:CMCC260004 Tender ID -2026_NSPCL_269123 SCHEDULE - 4 : Installation Services including erection Works,Insurance covers(other than inland transit Insurance ) and other services as specified in the bidding documents excluding taxes as applicable Item Sl. No. Description Unit Of Measurement QTY. Option-1 Unit Price (Rs.) Amount (Rs.) |
| 40 | 2.0 A Installation Services I For Civil, Structural and Mechanical items of new ESPs including ash handling system (3 nos.) Lot 1.0 0.0 II For Civil, Structural and Mechanical items for renovation of existing ESPs including ash handling system includinga associated structural Works (3 nos.) Lot 1.0 0.0 III For Electrical items for both new and renovation of existing ESPs (3 nos.) Lot 1.0 0.0 IV For Control and Instrumentation Items for both new and renovation of existing ESP’s (3 nos.) Lot 1.0 0.0 V Misc. Equipments ( other than specified above ) Lot 1.0 0.0 Total Installation Services (A) 0.0 B Amount linked to Safety Aspects/ compliance to Safety Rules (This Price component should not be less than 2.5% of the cumulative total of Installation services of the Contract as per BDS item no. 4.3) Lot 1.0 0.0 TOTAL for Schedule-4 (A+B) (To Schedule 4 Grand Summary) (Bidders to mention this amount in sheet BOQ1 sl no 1.03) 0.0 R&M work of ESP Up-gradation at Bhilai PP-II (2X30MW+1X14MW)Referenc No/Bidding Document No:CMCC260004 Tender ID -2026_NSPCL_269123 Schedule No. 7: Goods and Services Tax (GST) The details of Goods and Services Tax (as on seven (07) days prior to the last date for submission of price bids) applicable on the price of goods and services quoted in Schedule-2,3 & 4, not included in the Bid Price and which may be payable by the Employer in accordance with the provisions of Bidding Documents are as under : S.No. Bid Price Component Rate of GST (%) Amount on which GST applicable (in INR) Total GST payable (in INR) |
| 41 | Ex-Works-Main Equipment (Schedule-2) |
| 42 | Ex-Works-Mandatory Spares (Schedule-2) |
| 43 | F&I-Main Equipment (Schedule-3) |
| 44 | F&I-Mandatory Spares (Schedule-3) |
| 45 | Installation Services Services (Schedule-4) |
| 46 | Amount linked to Safety Aspects/ compliance to Safety Rules (Schedule-4) TOTAL Schedule-7(GST) (Bidders to mention this amount in sheet BOQ1 sl no 1.04 ) 0.0 NOTE: 1. In case rate of GST is different for various items, such different rates of GST along with the amount on which such GST is applicable shall be suitably indicated by the bidders in this schedule.2. Bidder may also insert additional rows to indicate different rates of GST, if applicable, |
| 47 | GRAND TOTAL R&M work of ESP Up-gradation at Bhilai PP-II (2X30MW+1X14MW)Referenc No/Bidding Document No:CMCC260004 Tender ID -2026_NSPCL_269123 Schedule No. 6 : Recommended Spare Parts Item Description Qty Unit Price Total Price Local transportation charges (including inland insurance) Total price (as delivered at Project) Ex-Works (India) (INR) Ex-Works (India) (INR) FOR Site (INR) |
| 48 | 2.0 Recommended spares for selected Option 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 TOTAL PRICE 0.0 We also confirm that the items of Recommended spares with same specification having same identification number but with different item code have been quoted by us at the same price. Further all such items of spares have been clubbed together and enlosed separately at Annexure-............... to our offer R&M work of ESP Up-gradation at Bhilai PP-II (2X30MW+1X14MW)Referenc No/Bidding Document No:CMCC260004 Tender ID -2026_NSPCL_269123 Schedule No. 8B: BREAK-UP OF THE TYPE TESTS CHARGES QUOTED IN SCHEDULE-2. We confirm that in case for the type test certificates furnished by us during execution of Contract, in case of award, is (are) not acceptable to the Owner on the grounds indicated in the technical specifications, the relevant test(s) shall be conducted without any price repercussion to the Owner. R&M work of ESP Up-gradation at Bhilai PP-II (2X30MW+1X14MW)Referenc No/Bidding Document No:CMCC260004 Tender ID -2026_NSPCL_269123 SCHEDULE - 9 -Schedule of Unit Rate (The quantity indicated here at column no 6 are for all the three units) Item Description Unit Quantity Unit cost (INR) Amount (INR) |
| 49 | Guillotine gate/ Dampers |
| 50 | Electrical Actuator with Integratl Starter |
| 51 | Monorails with electrically operated hoist |
| 52 | Expansion joint NOTES: 1) The Unit rates of various items which are break-up of items quoted in Schedule-1 and Shcedule-3 on 'Lot'/'Lumpsum'/'Set' basis are mentioned here under. We confirm that the prices of these items are as per the requirement of Techinical Specification are already included in the lump-sum prices quoted in Schedule-1 and/or Schedule-3. We further confirm that these unit rates shall be used for contract price adjustment on account of quantity variation, if any, during execution of work as per approved drawings. The rates for Transportation and Insuarnce component quoted in Schedule-2 shall be considered on prorata lumpsum basis, in case of any variations. 2) The bidder shall specify the item description , quantities , unit rates in this schedule as per his own break-up from which schedule 1 and 3 will be built up. 3) F&I and installation prices corresponding to above items shall be calculated proportionately on the basis of total quoted price of equipment(Ex-Works) under Schedule-2 and corressponding F&I and Installation price of these equipment quoted in Scedule 3 and Schedule-4 4) The items under unit rate portion mentioned in shcedule 1 & 3 need not be repeated here. In case of any repetition of items here, the rates quoted in Schedule 1 & 3 shall prevail . Please Enable Macros to View BoQ information |
