|
| 1 | Cleaning of over burden coal, iron ore, any other related cargo along coal stack yard on alignment of pipe line & removing the cargo by pay loader, poclain and depositing the same to nearby stack yard with supply of all labour, T&P, Machineries, all taxes, tollage, etc. all complete as per direction of Engineer-in-Charge. (Excluding GST). |
| 2 | Making lead caulked joint conforming to IS:3114-1994 with molten lead confirming to IS 782, to Spun Iron or Cast Iron pipes and fittings/ D.I. pipes or any other pipes of the following nominal diameter including testing of the joints as per specification etc. all complete as per direction of Engineer-in-Charge. (Excluding GST). |
| 3 | 100mm dia lead Joint |
| 4 | 150mm dia lead Joint |
| 5 | 200mm dia lead Joint |
| 6 | 300mm dia lead Joint |
| 7 | 450mm dia lead Joint |
| 8 | Providing flanged joints confirming to IS:3114-1994 to flanged cast Iron pipes/ D.I. pipes or other pipes and fittings of the following nominal diameters including testing of joints, cost of bolts and nuts and rubber insertions as per specification etc. all complete as per direction of Engineer-in-Charge. (Excluding GST). |
| 9 | 100mm dia flanged Joint |
| 10 | 150mm dia flanged Joint |
| 11 | 200mm dia flanged Joint |
| 12 | 300mm dia flanged Joint |
| 13 | 450mm dia flanged Joint |
| 14 | Cleaning of chocked ferrule points & excluding of fittings if necessary as per site condition including earth work excavation and refilling with supply of GI fittings, labour, T&P, checking the pipe line to ensure no leakage on resuming to required pressure with mending good to damages etc. all complete as per direction of Engineer-in-Charge. (Excluding GST). |
| 15 | Cleaning of OH tank of multistoried building/ clear water sump, cleaning the deposited silt inside the tanks by aid of pans & vessels & brushing the interior surface by soft brushes using bleaching/ surf wash for germ free as per direction with supply of all labour & pumping out water by diesel pump with hire & running charges of pump including cost of fuel & operator, scaffolding upto any height if required etc. all complete as per direction of Engineer-in-Charge. (Excluding GST). |
| 16 | Cleaning of sewerage line, septic tanks (Big & small) man hole, I.C., soak-way pit & disposing sewerage sludge & burring in a pre-digged pit near by & closing with local earth with supply of all labour, T&P, pump including hire and running charges of pumps, all taxes etc. all complete as per direction of Engineer-in-Charge. (Excluding GST). |
| 17 | Big size septic tank |
| 18 | Small size septic tank |
| 19 | Manhole |
| 20 | Inspection Chamber |
| 21 | Removal of sewage & sludge from septic tank and sewage sump by using gully tanker or equivalent machine and disposing it at designated place with supply of all materials, labour, T&P etc all complete as per direction of Engineer-in-Charge. (Excluding GST). |
| 22 | Dismantling of IWC & EWC, HCI pipes with foot rest from toilet, digging out of sand & khoa from the sunken floor chipping, cleaning the wall and base & removing the debrises with supply of all labour, T&P, taxes etc all complete as per direction of Engineer-in-Charge. (Excluding GST). |
| 23 | Labour charges for fitting of IWC & EWC with foot rest in toilet, digging out of sand & khoa from the sunken floor, chipping cleaning the wall and base & plastering with CM (1:4), curing repairing the HCI Joints leakages, supplying, jointing materials ensuring no leakages in sunken floor with supply of all labour, T&P etc all complete as per direction of Engineer-in-Charge (excluding cost of EWC/IWC/OWC). (Excluding GST). |
| 24 | Supplying, mixing, transporting, laying in proper level & grade Cement Concrete 1:4:8 (1 Cement : 4 Coarse Sand : 8 hard granite metal of 40mm & below size Crusher Broken) for Plain Cement Concrete (PCC) including form works made of ply/ steel shutters, hoisting, laying over compacted surface, compacting by any approved means, finished smooth to the exposed surface to proper level & gradient, barricading the work site, curing etc. with supply of all materials, labour, T&P, all taxes, royalties, hire & running charges of all machineries, transportation charges, Port entry fees, cost of water, testing charges of materials, excluding GST etc. all complete as per direction of Engineer-in-charge. |
| 25 | 25mm. thick A.S. flooring in cement concrete (1:2:4) at all floors & levels using 12mm. and down grade hard black C.B granite chips of approved quality including mixing, hoisting, laying, compacting, curing, finished smooth to the exposed surface with a floating coat of cement punning, rounding the corners where found necessary including cost of supply of all materials, labour, T&P, taxes, tollage, royalties, transportation charges, etc. complete but excluding GST as per direction of Engineer-in-charge. (New Work) |
| 26 | Brick work in K.B. Bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm² with C.M (1:6) including splay/cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour, T&P, taxes, royalties, transportation charges, curing, testing charges etc. all complete but excluding cost of GST as per direction of Engineer-in charge |
| 27 | 16mm thick Cement plaster with cement mortar (1:6) proportion, over brick work including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including cost & supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, tollage, royalties, etc. all complete but excluding cost of GST as per direction of Engineer-in-charge. |
| 28 | RCC 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate of 20mm to 12mm size crusher broken) of approved quality for RCC work including mixing, hoisting and laying the concrete in position, finished smooth to the exposed surface, consolidating with vibrator where found necessary, curing, etc. all complete excluding cost of centering and shuttering and steel with supply of all materials, labour, T&P, taxes, tollage, royalties, etc. complete, excluding GST in all respect as per the direction of Engineer-in-charge. |
| 29 | Supply of Fe-500 steel confirming to I.S. Specifications of any approved make including cutting, straightening, bending, binding & placing the grills in position for RCC works including cost of binding wire of 18 to 20 gauge with supply of all materials, labour, transportation, T&P, all taxes, tollage, Port entry fees etc. all complete excluding GST and as per direction of Engineer in charge.N.B: Payment shall be made as per the co-efficient laid down in IS-1786. No wastages shall be paid. |
| 30 | Neat cement punning over cement plaster using cement @2.20 kg/m2 & curing with cost of labour, materials, T&P, taxes, royalties, curing etc. all complete but excluding GST and as per the direction of Engineer-in-charge (For all floors). |
| 31 | Dismantling of existing RCC structures by using mechanical jack hammer or any suitable method, cutting of reinforcement steel and disposing the same at designated place as directed, barricading the work site with supply of all labour, engagement, hire & running charges of all equipments, T&P, all taxes, Port entry fees, providing safety arrangements for workmen, cleaning the site, all transportation, excluding GST, etc. all complete as per direction of Engineer-in-charge. |
| 32 | Cleaning of shrub jungles & removing the unwanted wild plants bushes debrises, waste materials, garbage etc from in & around the premises of alignment of pipe line & to deposit the roots of dead twigs shrub etc with supply of all materials, labours, T&P, all taxes, etc. all complete but excluding GST and as per direction of Engineer-in-Charge. |
| 33 | Labour charges for greasing & fixing gland packing including rubber insertion packing in sluice valve including supply of all materials, labours, T&P, all taxes, etc. all complete but excluding GST and as per direction of Engineer-in-Charge. |
| 34 | Supply of PVC water tank of different sizes with ISI Mark & IS specification including transportation of all labour, T&P, all taxes etc. all complete but excluding GST and as per direction of Engineer-in-Charge. |
| 35 | 2000 Ltr. Capacity |
| 36 | 1000 Ltr Capacity |
| 37 | Supply and engagement of manpower for attending day to day emergency work of pipe line, cutting of wild grass from buildings etc. all complete but excluding GST and as per direction of Engineer-in-Charge. |
| 38 | Skilled Labour2 Nos. worker x 313 days = 626 mandays1 No. Mechanic (Skilled labour)3 days x 12 months = 36mandaysTotal = 662 mandays |
| 39 | Un-Skilled Labour(2 Nos worker + 1 No. Sweeper)3 Nos x 313 days = 939 mandays |
| 40 | Supply of the following SWR pipes and fittings with ISI Mark including supply of screw nail, cutting the roof wall for taking the rain water line with scaffolding with supply of all materials, labour, T&P, all taxes etc. all complete but excluding GST and as per direction of Engineer-in-Charge. |
| 41 | 110mm mouled PVC Pipe |
| 42 | 110mm mouled PVC Plain Bend |
| 43 | 110mm mouled PVC door bend |
| 44 | 110mm mouled PVC P Trap |
| 45 | 110mm mouled PVC Socket |
| 46 | Supplying of following D.I. pipe & fittings of good quality ….etc. with supply of all materials, labour, T&P, transportation charges, hire & running charges of all equipments, port entry fees, excluding GST, etc. all complete as per direction of Engineer-in-Charge. |
| 47 | 100mm X 90degree DI flanged bend |
| 48 | 150mm X 90degree DI flanged bend |
| 49 | 100mm DI Mechanical Collar |
| 50 | 150mm DI Mechanical Collar |
| 51 | 200mm DI Mechanical Collar |
| 52 | 300mm DI Mechanical Collar |
| 53 | 450mm DI Mechanical Collar |
| 54 | Supply of GI pipe (medium quality) & UPVC pipes (80sch.) & fittings of different dia as per ISI mark & specification including transportation, all taxes, tollage & disposing the materials in site office store with stacking including supplying of all labour, T&P etc. all complete but excluding GST and as per direction of Engineer-in-Charge. |
| 55 | 15mm UPVC Pipe |
| 56 | 20mm UPVC Pipe |
| 57 | 25mm UPVC Pipe |
| 58 | 40mm UPVC Pipe |
| 59 | 50mm UPVC Pipe |
| 60 | 15mm Dia. G.I Pipe |
| 61 | 20mm Dia. G.I Pipe |
| 62 | 25mm Dia. G.I Pipe |
| 63 | 40mm Dia. G.I Pipe |
| 64 | 50mm Dia. G.I Pipe |
| 65 | 15mm Dia. G.I Socket |
| 66 | 25mm Dia. G.I Socket |
| 67 | 15mm Dia. G.I elbow |
| 68 | 25mm Dia. G.I elbow |
| 69 | 25mm Dia. G.I union |
| 70 | 15mm Dia. G.I tee |
| 71 | 20mm Dia. G.I tee |
| 72 | 15mm Dia. G.I. S/P |
| 73 | 20mm Dia. G.I. S/P |
| 74 | 25mm Dia. G.I. S/P |
| 75 | 40mm Dia. G.I. S/P |
| 76 | 50mm Dia. G.I. S/P |
| 77 | 20mm G.I Reducer Socket |
| 78 | 20mm G.I Reducer Elbow |
| 79 | 25mm G.I Reducer Socket |
| 80 | 25mm G.I Reducer Elbow |
| 81 | 50mm G.I Reducer Socket |
| 82 | 50mm G.I Reducer Elbow |
| 83 | Supply of following PH materials of good quality with ISI mark with all transportation, loading & unloading at both ends with all taxes, tollage, royalty etc. complete & depositing in the section store as per direction of Engineer-in-Charge. (Excluding GST). |
| 84 | 15mm brass bib cock |
| 85 | 15mm PVC/ Symet Bib cock |
| 86 | 15mm CP Push cock |
| 87 | 15mm CP pillar cock |
| 88 | 15mm Brass Stopcock |
| 89 | 20mm Brass Stopcock |
| 90 | Bevelled edge glass mirror with mirror back board & (brass/CP) screws (4nos. Screws for each mirror) 600mm x 450mm of 5mm thick). (Excluding GST) |
| 91 | 10.00 Ltr. capacity cistern (slim line/ hindware/ commander make) |
| 92 | 20mm dia CP Towel rail of 600mm long |
| 93 | Commode cover with hinges |
| 94 | 15mm CP Angle Stop cock |
| 95 | 15mm CP long body Bibcock |
| 96 | CP Soap Holder |
| 97 | CP Movable Shower with arm (Over head) |
| 98 | 50mm dia Ballcock with PVC Ball & Rod |
| 99 | 25mm dia Ballcock with PVC Ball & Rod |
| 100 | CP Self Size 20\\" x 5\\" |
| 101 | 15mm PVC connection Pipe with both side PVC coupling |
| 102 | 32mm PVC waste pipe with coupling |
| 103 | 20mm full way valve (heavy duty) |
| 104 | 25mm full way valve (heavy duty) |
| 105 | 40mm full way valve (heavy duty) |
| 106 | 50mm full way valve (heavy duty) |
| 107 | 15mm dia UPVC Ball valve |
| 108 | 20mm dia UPVC Ball valve |
| 109 | 25mm dia UPVC Ball valve |
| 110 | 40mm dia UPVC Ball valve |
| 111 | 50mm dia UPVC Ball valve |
| 112 | CP grating |
| 113 | Porcelain hand wash basin size (16\\"x22\\") |
| 114 | OWC (23\\") |
| 115 | Percelain EWC with P-Trap/ S-Trap including seat cover |
| 116 | Rubber insertion packing of 3mm thick |
| 117 | MS Nut & bolt of required size |
| 118 | CI Bracket for Basin |
| 119 | PVC Washer for bibcock |
| 120 | Standing Urinal with Bracket (380x580x350) |
| 121 | Elster Helix H-4000 Woltman Type Cold Water Flow MeterFlanged end Class-B |
| 122 | Engagement of hired Pick-up (207 / Camper) for day-to-day maintenance work and vlve side for fresh water supply to ship in 24x7 basis including fuel, lubricant, cost of driver, port entry fees for both driver and vehicle etc. all complete excluding GST as per direction of Engineer-in-Charge. |
| 123 | Providing and engaging Hydra/ Crane (80 tonne lifting capacity) on hour basis for Shifting of Pipes, sewage fittings and any pump house fittings, fixtures laid inside pump house peripheri or others required area along with any emergency water supply maintenance related work including hire and running charges of hydra, cost of driver, POL, all taxes excluding GST etc. all complete as per direction of Engineer-in-charge. (Driver pass, Machine Entry pass will be borne by the contractor). |
| 124 | Engagement of hydraulic earth excavator of 1cum bucket capacity/ JCB for excavation of hard soil including leveling and dressing the bed, refilling the excavated materials with all leads and lifts with supply of all labour, T&P, hire & running charges with cost of fuel and consumables, all taxes, Port entry fees etc. all complete but excluding GST and as per direction of Engineer-in-Charge. |
| 125 | Engagement of Tractor for lifting of pipes and fittings along with T&P and labours for repair work with all leads & lifts, supply of all labour, T&P, hire & running charges with cost of fuel and consumables, all taxes, Port entry fees etc. all complete but excluding GST and as per direction of Engineer-in-Charge. |
| 126 | Dewatering at work site by providing 10HP diesel engine Pump of dewatering pump sets attached with suction and delivery pipes with cost of fuel, operator, watch and ward including all cost of running and hire charges of pump sets all taxes, Port entry fees etc. all complete but excluding GST and as per direction of Engineer in charge. |
| 127 | Supply of electrical/ mechanical fittings/ fixtures of ISI mark and specification with conveyance charges. (Excluding GST). |
| 128 | Power contactor type-3TF50, 02-A, 230V of SIEMENS make/ similar |
| 129 | Spare contactor kit for -3TF50 of SIEMENS make/ similar items |
| 130 | Bimetal overload relay Range 50-60A, Type: 3UA5800-2PZ1 with mounting kit of Siemense make/ similar item |
| 131 | Fully Automatic Star-delta Stater 55KW/ 75HP Type-MN65 FASD of L&T make/ similar items |
| 132 | Motor back Protection MCCB DN2/ 250M, 3Pole 250A of L&T make/ similar items |
| 133 | Motor back Protection MCCB DN2/ 250M, 3Pole 200A of L&T make/ similar items |
| 134 | Motor back Protection MCCB DN0/ 250M, 3Pole 100A of L&T make/ similar items |
| 135 | Fully Automatic Star-delta Stater 22KW/ 30HP Type-MN25 FASD of L&T make/ similar items |
| 136 | Copper Ring Type Socket 50Sqmm |
| 137 | Supplying the following Kirlosker/ Vag/ Audco of equivalent make cast iron Non Rising Spindle type Sluice Valve confirming to IS 14846 with supply of materials, tollage, taxes, etc including stacking at site with all transportation etc. all complete as per direction of Engineer-in-Charge. (Excluding GST) |
| 138 | 100mm CI sluice valve |
| 139 | 150mm CI sluice valve |
| 140 | 200mm CI sluice valve |
| 141 | 300mm CI sluice valve Please Enable Macros to View BoQ information |
