|
| 1 | Construction of Road from MRL16-Takuamari to Basugaon (Kokrajhar) to Chikibiki including Cross-Drainage works and Routine Maintenance of the works for 5 years |
| 2 | Clearing and Grubbing Road LandClearing and grubbing of Road land including up rooting rank vegetation grass, bush, shrubs saplings and trees of girth upto 300mm removal of stumps of trees cut earlier and disposal of unseviceable materials & stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal & disposal of top organic soil not exceeding 150mm in thickness as per Technical Specifications Clause 201(I) By Manual Means- (a) In area of non thormy jungle |
| 3 | Dismantling of StructuresDismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202.II By Mechanical Means(a) Cement Concrete |
| 4 | Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202.b) Above 600 mm to 900 mm dia Hume pipe |
| 5 | Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202.[SOR 25-26] [item No.2.13]c) Above 900 mm dia Hume pipe |
| 6 | Construction of embankment with material obtained from borrow pits,Construction of embankment with approved materials obtained from borrow pits with a lift up to 1.5m, transporating to site, spreading, grading to required slope and compacting to meet required of Tables 300.1 and 300.2 with a lead upto 1000m as per technical specification clause 301.5a) Private land |
| 7 | Construction of sub-grade and earthen shouldersConstruction of sub-grade and earthen shoulders with approved materials obtained from borrow pits with all lifts and leads, transporating to site, spreading, grading to required slope and compacting to meet required of Table 300.2 with lead upto 1000m as per technical specification clause 303.1(a) Private land |
| 8 | Construction of Granular sub-base (A) By mix in Place Method,Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.[SOR 25-26] [item No.4.1] (II) For Grading Material (Gr - II ) |
| 9 | Wet Mix MacadamProviding, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406By Mechanical Means with 1 km lead |
| 10 | Prime-Coat (i) Low porosityProviding and applying primmer coat with bitumin emultion (SS-1) on prepared surcafe of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per technical Clause 502. |
| 11 | Tack-coat (III) Providing and applying tack coat with bitumin emultion (RS-1) using emultion distributor at the rate of 0.25-0.30 Kg/sqm on the prepared granular surface tresated with primer & cleaned with hydraulic broom as per technical specification clause 503 |
| 12 | Mix Seal SurfacingProviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509.II) By Mechanical MeansB) Type Bii) Bitumen (S-65) |
| 13 | Trafic - Signs B. Semi Reflective Traffic Signs(1) Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5mm thick supported on a mild steel angle Iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450mm x 450mm x600mm, 600mm below ground level as per drawings and Technical Specification clause 801.[SOR 25-26] [item No.10.2] (vii) 900mm Octagon - Stop Sign |
| 14 | Trafic - Signs B. Semi Reflective Traffic Signs(1) Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5mm thick supported on a mild steel angle Iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450mm x 450mm x600mm, 600mm below ground level as per drawings and Technical Specification clause 801.(ii) Warning Signs [600mm -Triangle] |
| 15 | Trafic - Signs B. Semi Reflective Traffic Signs(1) Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5mm thick supported on a mild steel angle Iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450mm x 450mm x600mm, 600mm below ground level as per drawings and Technical Specification clause 801.[SOR 25-26] [item No.10.2] (iv) Speed limit Sign [600mm -Cricular] |
| 16 | Trafic - Signs B. Semi Reflective Traffic Signs(1) Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5mm thick supported on a mild steel angle Iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450mm x 450mm x600mm, 600mm below ground level as per drawings and Technical Specification clause 801.(v) Chevron Signs [600mmx450mm] |
| 17 | Trafic - Signs B. Semi Reflective Traffic Signs(1) Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5mm thick supported on a mild steel angle Iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450mm x 450mm x600mm, 600mm below ground level as per drawings and Technical Specification clause 801.[SOR 25-26] [item No.10.2] (iii) 800 mm x 600 mm rectangular. |
| 18 | Trafic - Signs B. Semi Reflective Traffic Signs(1) Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5mm thick supported on a mild steel angle Iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450mm x 450mm x600mm, 600mm below ground level as per drawings and Technical Specification clause 801.[SOR 25-26] [item No.10.2]Hazard Markers (300mmX900mm) [Rate as per Annexure-IV] |
| 19 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous SurfaceProviding and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications.[SOR 25-26] [item No.16.34] |
| 20 | Road Markers/Road Stud with Lens ReflectorProviding and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973.[SOR 25-26] [item No.10.20] |
| 21 | Tack-coat for Hump (III) Providing and applying tack coat with bitumin emultion (RS-1) using emultion distributor at the rate of 0.25-0.30 Kg/sqm on the prepared granular surface tresated with primer & cleaned with hydraulic broom as per technical specification clause 503.[SOR 25-26] [item No.5.2] |
| 22 | Mix Seal Surfacing for Hump Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509.II) By Mechanical MeansB) Type Bii) Bitumen (S-65) |
| 23 | Painting lines, Dashes, Arrows, etc. on Road in Two Coats on New WorkPaintinglines,dashes,arrows,etc.onroadsintwocoatsonnewworkwithreadymixedroadmarkingpaintconformingtoIS:164onbituminous/concretesurface,includingcleaningthesurfaceofalldirt,dustandotherforeignmatter,demarcationatsiteandtrafficcontrolasperdrawingandTechnicalSpecification Clause 1702. |
| 24 | Kilometer StoneReinforce cement concreter M15 grade kilometer stone of standard design as per IRC:8 fixing in position including painting and printing etc. as per drawing and technical specification clause 1703..(i) 5th KM Stone |
| 25 | Kilometer StoneReinforce cement concreter M15 grade kilometer stone of standard design as per IRC:8 fixing in position including painting and printing etc. as per drawing and technical specification clause 1703.[SOR 25-26] [item No.10.10] (ii)Ordinary Kilometer Stone (precast) |
| 26 | Kilometer Stone Reinforce cement concreter M15 grade kilometer stone of standard design as per IRC:8 fixing in position including painting and printing etc. as per drawing and technical specification clause 1703. (iii) 200 m Stone (precast) |
| 27 | Providing and Fixing with with 'Logo' of PMGSY Project Providing and fixing of typical PMGSY informatory sign board with logo as per MORD specifications and drawing. Three MS plates of 1.6mm thick, top and middle plate will be welded with MS flat iron 25mm x 5mm x size on back on edge. The lower plate will be welded with MS angle iron 25mm x 25mm x 5mm. The anfle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75mm of 12 SWG sheet tubes posts duly embeded in cement concrete M15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The topmost dimond plate will be welded to middle plate by 47mm X 47mm of 12 SWG steel plate tube. All MS will be stove enameled on both sides. Lettering and printing arrows, borders etc. will be painted with ready mixed synthetic emnamel paint of superior quality in required shade and colour. All sections of framed posts and steel tuube will be painted and two coats of epoxypaint as per specification clause 1701 and Annexure 1700.1. |
| 28 | Providing and fixing of typical Logo Board with PMGSY Logo as per MORD specifications and drawing. 1 nos. 1.6mm thick MS sheet duly welded with 5mm thick steel plate on back on edges. The 1 nos. steel plate will be welded horizontally with 1 nos. 75mm x 75mm of 12 SWG |sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The 1 no steel plate will be welded vertically to 1 no. 75mm x 75mm of 12 |SWG sheet tubes posts duly welded to vertical tubes. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and coloue. All sections of framed posts and |steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1. |
| 29 | Providing and fixing of typical Citizens Information Board with Logo as per MORD specifications and drawing. Two nos. 1.6mm thick MS duly welded sheet with 5mm thick steel plate on back on edges. The 4 nos. steel plate will be welded horizontally with 2 nos. 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 600mm x 600mm x 750mm, 750mm below ground level. The 2 nos. steel plate will be welded vertically to 2 nos. 75mm x 75mm of 12 SWG sheet tubes posts duly welded to vertical tubes. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and coloue. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1.[SOR 25-26] [item No.10.16] Citizen Information board and maintenance information board are considered |
| 30 | Setting Out(v) Typical benchmark as per Drawing 200.1.[SOR 25-26] [item No.1.16] |
| 31 | Setting Out(vi) Typical reference pillar as per Drawing 200.2 .[SOR 25-26] [item No.1.16] |
| 32 | Surface Drains in SoilConstruction of unlined surface drains of average cross-sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307Manual Means |
| 33 | Turfing with SodsFurnishing and laying of the live sods of perennial turf forming grass on embankment slope, verges or other locations shown on the drawing or as directed by the Engineer including preparation of ground, fetching of sods and watering as per Technical Specification Clause 309. |
| 34 | Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling in trenches with excavated suitable material.[SOR 25-26] [item No.11.1](I) Ordinary Soil Upto 3 m depth |
| 35 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203. No.11.4]I) With crushed StoneA) P.C.C grade M 10i) Nominal mix 1:3:6 |
| 36 | Bedding for Pipe B) Type B (First class bedding)ii) Laying (First Class) bedding on well compacted approved granular material as per Clause 1105 (ii). |
| 37 | Reinforced Cement Concrete Pipe NP3 in Single RowProviding and laying reinforced cement concrete pipe NP3 for culverts as per design on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106.[SOR 25-26] [item No.9.4]ii) 1000 mm dia |
| 38 | Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. |
| 39 | Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 kg laid dry complete as per drawing and technical specifications Clause 1301. |
| 40 | Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204. Please Enable Macros to View BoQ information |
